Installing on a Pi Zero

Big11 · Jan 8, 2019, 9:49 AM

@andyc7687 said in Installing on a Pi Zero:

pm2 start ~/MagicMirror/installers/pm2_MagicMirrorPi0.json

Need help…

I have installed MM on my PiZero’s many times with no succes to start it just localy and automatically …

i followed your script and all seems running well and i did what you decided to autostart with PM2…
but it didn’t

after rebooting i can see the process “PM2 v3.4.2 GOD” running, but Nothing happens on my screen

I tried to start the three startscripts manually and i got an Gtk-Error starting chromium-browser which i can’t work

That it basicly works is shown when i start first the xserver manually (startx) and then whitin starting chromium-browser and Point it to http://localhost:8080…

What is going wrong?
where i can see some Errors ?

Thanks a lot…

andyc7687 · Jan 8, 2019, 7:13 PM

@big11 From what I am reading of your reply, are you booting into command line mode? You should be booting into Desktop AutoLogin from sudo raspi-config | Choose option: Boot Options | Choose option: Desktop / CLI | then Desktop Autologin.

Can you confirm which install script you ran? Did you run the one from ac2799/MagicMirror or ac2799/MagicMirrorPi0Installer?

12wsx · Jan 8, 2019, 7:00 PM

This post is deleted!

12wsx · Jan 8, 2019, 7:04 PM

same problem to me.
using raspberry pi Zero (not W)
installed latest Raspbian Stretch with desktop. update from first run creator.
Full instalation LOG


pi@raspberrypi:~ $ bash -c "$(curl -sL https://raw.githubusercontent.com/ac2799/     MagicMirror/master/installers/raspberry.sh)"

$$\      $$\                     $$\           $$\      $$\ $$\                                               $$$$$$\
$$$\    $$$ |                    \__|          $$$\    $$$ |\__|                                             $$  __$$\
$$$$\  $$$$ | $$$$$$\   $$$$$$\  $$\  $$$$$$$\ $$$$\  $$$$ |$$\  $$$$$$\   $$$$$     $\   $$$$$$\   $$$$$$\  \__/  $$ |
$$\$$\$$ $$ | \____$$\ $$  __$$\ $$ |$$  _____|$$\$$\$$ $$ |$$ |$$  __$$\ $$  __     $$\ $$  __$$\ $$  __$$\  $$$$$$  |
$$ \$$$  $$ | $$$$$$$ |$$ /  $$ |$$ |$$ /      $$ \$$$  $$ |$$ |$$ |  \__|$$ |       \__|$$ /  $$ |$$ |  \__|$$  ____/
$$ |\$  /$$ |$$  __$$ |$$ |  $$ |$$ |$$ |      $$ |\$  /$$ |$$ |$$ |      $$ |           $$ |  $$ |$$ |      $$ |
$$ | \_/ $$ |\$$$$$$$ |\$$$$$$$ |$$ |\$$$$$$$\ $$ | \_/ $$ |$$ |$$ |      $$ |           \$$$$$$  |$$ |      $$$$$$$$\
\__|     \__| \_______| \____$$ |\__| \_______|\__|     \__|\__|\__|      \__|            \______/ \__|      \________|
                       $$\   $$ |
                       \$$$$$$  |
                        \______/

If you are running a Pi Zero, installation will continue, but you will have to r     un in server only mode.
Updating packages ...
Stary:1 http://archive.raspberrypi.org/debian stretch InRelease
Stary:2 http://raspbian.raspberrypi.org/raspbian stretch InRelease
Czytanie list pakietów... Gotowe
Czytanie list pakietów... Gotowe
Budowanie drzewa zależności
Odczyt informacji o stanie... Gotowe
Obliczanie aktualizacji... Gotowe
0 aktualizowanych, 0 nowo instalowanych, 0 usuwanych i 0 nieaktualizowanych.
E: Nie udało się otworzyć pliku blokady /var/lib/dpkg/lock - open (13: Brak dost     ępu)
E: Nie udało się zablokować katalogu administracyjnego (/var/lib/dpkg/), czy uży     to uprawnień administratora?
Update failed, carrying on installation ...
Installing helper tools ...
Czytanie list pakietów... Gotowe
Budowanie drzewa zależności
Odczyt informacji o stanie... Gotowe
build-essential is already the newest version (12.3).
curl is already the newest version (7.52.1-5+deb9u8).
git is already the newest version (1:2.11.0-3+deb9u4).
unzip is already the newest version (6.0-21).
wget is already the newest version (1.18-5+deb9u2).
0 aktualizowanych, 0 nowo instalowanych, 0 usuwanych i 0 nieaktualizowanych.
Check current Node installation ...
Node.js is not installed.
Installing Node.js ...
Downloading node v11.6.0
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 17.0M  100 17.0M    0     0   861k      0  0:00:20  0:00:20 --:--:--  968k
Extracting node v11.6.0
Extracting node and npm
Czytanie list pakietów... Gotowe
Budowanie drzewa zależności
Odczyt informacji o stanie... Gotowe
git is already the newest version (1:2.11.0-3+deb9u4).
0 aktualizowanych, 0 nowo instalowanych, 0 usuwanych i 0 nieaktualizowanych.
Czytanie list pakietów... Gotowe
Budowanie drzewa zależności
Odczyt informacji o stanie... Gotowe
Zostaną zainstalowane następujące NOWE pakiety:
  unclutter
0 aktualizowanych, 1 nowo instalowanych, 0 usuwanych i 0 nieaktualizowanych.
Konieczne pobranie 16,6 kB archiwów.
Po tej operacji zostanie dodatkowo użyte 47,1 kB miejsca na dysku.
Pobieranie:1 http://ftp.icm.edu.pl/pub/Linux/distributions/raspbian/raspbian str     etch/main armhf unclutter armhf 8-20 [16,6 kB]
Pobrano 16,6 kB w 1s (14,1 kB/s)
Prekonfiguracja pakietów ...
Wybieranie wcześniej niewybranego pakietu unclutter.
(Odczytywanie bazy danych ... 80763 pliki i katalogi obecnie zainstalowane.)
Przygotowywanie do rozpakowania pakietu .../unclutter_8-20_armhf.deb ...
Rozpakowywanie pakietu unclutter (8-20) ...
Konfigurowanie pakietu unclutter (8-20) ...
Przetwarzanie wyzwalaczy pakietu man-db (2.7.6.1-2)...
Cloning MagicMirror ...
Cloning into 'MagicMirror'...
remote: Enumerating objects: 305, done.
remote: Counting objects: 100% (305/305), done.
remote: Compressing objects: 100% (273/273), done.
remote: Total 305 (delta 37), reused 169 (delta 22), pack-reused 0
Receiving objects: 100% (305/305), 614.71 KiB | 747.00 KiB/s, done.
Resolving deltas: 100% (37/37), done.
Cloning MagicMirror Done!
Installing dependencies ...
npx: zainstalowano 405 w 218.392s
npm notice CANARY npmc is experimental software. If you find an issue, please fi     le it in the main npm repository, and call out that you were using npmc.
npm WARN deprecated time-grunt@2.0.0: Deprecated because Grunt is practically un     maintained. Move on to something better. This package will continue to work with      Grunt v1, but it will not receive any updates.
npm WARN deprecated nomnom@1.8.1: Package no longer supported. Contact support@n     pmjs.com for more info.

> electron-chromedriver@1.8.0 install /home/pi/MagicMirror/node_modules/electron     -chromedriver
> node ./download-chromedriver.js

successfully dowloaded and extracted!

> electron@2.0.16 postinstall /home/pi/MagicMirror/node_modules/electron
> node install.js

Downloading SHASUMS256.txt
[============================================>] 100.0% of 5.39 kB (5.39 kB/s)

> magicmirror@2.6.0 install /home/pi/MagicMirror
> cd vendor && npm install

npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@1.2.4 (node_modules/fse     vents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@     1.2.4: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}     )

added 82 packages from 57 contributors and audited 220 packages in 118.631s
found 3 low severity vulnerabilities
  run `npm audit fix` to fix them, or `npm audit` for details

> magicmirror@2.6.0 postinstall /home/pi/MagicMirror
> sh installers/postinstall/postinstall.sh && npm run install-fonts

MagicMirror installation successful!

> magicmirror@2.6.0 install-fonts /home/pi/MagicMirror
> cd fonts && npm install

added 1 package from 1 contributor and audited 1 package in 42.42s
found 0 vulnerabilities

npm WARN grunt-stylelint@0.10.1 requires a peer of stylelint@^9.0.0 but none is      installed. You must install peer dependencies yourself.
npm WARN acorn-jsx@5.0.1 requires a peer of acorn@^6.0.0 but none is installed.      You must install peer dependencies yourself.

added 921 packages from 1366 contributors in 1049.638s
Errors while installing dependencies! (source command: npmc@latest install)
npm WARN grunt-stylelint@0.10.1 requires a peer of stylelint@^9.0.0 but none is      installed. You must install peer dependencies yourself.

+ acorn@6.0.5
added 2 packages from 78 contributors, updated 1 package and audited 2467 packag     es in 175.814s
found 8 vulnerabilities (7 low, 1 high)
  run `npm audit fix` to fix them, or `npm audit` for details
Errors while installing dependencies! (source command: npm install acorn@latest)
+ stylelint@9.9.0
added 155 packages from 107 contributors, removed 32 packages, updated 99 packages, moved 6 packages and audited 4452 packages in 458.975s
found 4 vulnerabilities (3 low, 1 high)
  run `npm audit fix` to fix them, or `npm audit` for details
Errors while installing dependencies! (source command: pm install stylelint@latest)
+ jshint@2.9.7
added 2 packages from 1 contributor, removed 6 packages and updated 5 packages in 226.509s
fixed 3 of 4 vulnerabilities in 4452 scanned packages
  1 vulnerability required manual review and could not be updated
Vulnerabilities may remain!
Check plymouth installation ...
Splashscreen: Checking themes directory.
Splashscreen: Create theme directory if not exists.
Splashscreen: Theme copied successfully.
Splashscreen: Changed theme to MagicMirror successfully.
Do you want use pm2 for auto starting of your MagicMirror (y/N)?y
/usr/local/bin/pm2 -> /usr/local/lib/node_modules/pm2/bin/pm2
/usr/local/bin/pm2-dev -> /usr/local/lib/node_modules/pm2/bin/pm2-dev
/usr/local/bin/pm2-docker -> /usr/local/lib/node_modules/pm2/bin/pm2-docker
/usr/local/bin/pm2-runtime -> /usr/local/lib/node_modules/pm2/bin/pm2-runtime
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@1.2.4 (node_modules/pm2/node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@1.2.4: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})

+ pm2@3.2.4
added 313 packages from 246 contributors in 320.301s

                        -------------

__/\\\\\\\\\\\\\____/\\\\____________/\\\\____/\\\\\\\\\_____
 _\/\\\/////////\\\_\/\\\\\\________/\\\\\\__/\\\///////\\\___
  _\/\\\_______\/\\\_\/\\\//\\\____/\\\//\\\_\///______\//\\\__
   _\/\\\\\\\\\\\\\/__\/\\\\///\\\/\\\/_\/\\\___________/\\\/___
    _\/\\\/////////____\/\\\__\///\\\/___\/\\\________/\\\//_____
     _\/\\\_____________\/\\\____\///_____\/\\\_____/\\\//________
      _\/\\\_____________\/\\\_____________\/\\\___/\\\/___________
       _\/\\\_____________\/\\\_____________\/\\\__/\\\\\\\\\\\\\\\_
        _\///______________\///______________\///__\///////////////__


                          Runtime Edition

        PM2 is a Production Process Manager for Node.js applications
                     with a built-in Load Balancer.

                Start and Daemonize any application:
                $ pm2 start app.js

                Load Balance 4 instances of api.js:
                $ pm2 start api.js -i 4

                Monitor in production:
                $ pm2 monitor

                Make pm2 auto-boot at server restart:
                $ pm2 startup

                To go further checkout:
                http://pm2.io/


                        -------------

[PM2] Init System found: systemd
Platform systemd
Template
[Unit]
Description=PM2 process manager
Documentation=https://pm2.keymetrics.io/
After=network.target

[Service]
Type=forking
User=pi
LimitNOFILE=infinity
LimitNPROC=infinity
LimitCORE=infinity
Environment=PATH=/usr/local/bin:/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin
Environment=PM2_HOME=/home/pi/.pm2
PIDFile=/home/pi/.pm2/pm2.pid

ExecStart=/usr/local/lib/node_modules/pm2/bin/pm2 resurrect
ExecReload=/usr/local/lib/node_modules/pm2/bin/pm2 reload all
ExecStop=/usr/local/lib/node_modules/pm2/bin/pm2 kill

[Install]
WantedBy=multi-user.target

Target path
/etc/systemd/system/pm2-pi.service
Command list
[ 'systemctl enable pm2-pi' ]
[PM2] Writing init configuration in /etc/systemd/system/pm2-pi.service
[PM2] Making script booting at startup...
[PM2] [-] Executing: systemctl enable pm2-pi...
Created symlink /etc/systemd/system/multi-user.target.wants/pm2-pi.service → /etc/systemd/system/pm2-pi.service.
[PM2] [v] Command successfully executed.
+---------------------------------------+
[PM2] Freeze a process list on reboot via:
$ pm2 save

[PM2] Remove init script via:
$ pm2 unstartup systemd

                        -------------

__/\\\\\\\\\\\\\____/\\\\____________/\\\\____/\\\\\\\\\_____
 _\/\\\/////////\\\_\/\\\\\\________/\\\\\\__/\\\///////\\\___
  _\/\\\_______\/\\\_\/\\\//\\\____/\\\//\\\_\///______\//\\\__
   _\/\\\\\\\\\\\\\/__\/\\\\///\\\/\\\/_\/\\\___________/\\\/___
    _\/\\\/////////____\/\\\__\///\\\/___\/\\\________/\\\//_____
     _\/\\\_____________\/\\\____\///_____\/\\\_____/\\\//________
      _\/\\\_____________\/\\\_____________\/\\\___/\\\/___________
       _\/\\\_____________\/\\\_____________\/\\\__/\\\\\\\\\\\\\\\_
        _\///______________\///______________\///__\///////////////__


                          Runtime Edition

        PM2 is a Production Process Manager for Node.js applications
                     with a built-in Load Balancer.

                Start and Daemonize any application:
                $ pm2 start app.js

                Load Balance 4 instances of api.js:
                $ pm2 start api.js -i 4

                Monitor in production:
                $ pm2 monitor

                Make pm2 auto-boot at server restart:
                $ pm2 startup

                To go further checkout:
                http://pm2.io/


                        -------------

[PM2] Spawning PM2 daemon with pm2_home=/home/pi/.pm2
[PM2] PM2 Successfully daemonized
[PM2][WARN] Applications MagicMirror not running, starting...
[PM2] App [MagicMirror] launched (1 instances)
┌─────────────┬────┬───────┬────────┬────────┬─────┬────────┬──────────┐
│ Name        │ id │ mode  │ status │ ↺      │ cpu │ memory │
├─────────────┼────┼───────┼────────┼────────┼─────┼────────┼──────────┤
│ MagicMirror │ 0  │ 2.6.0 │ fork   │ online │ 0   │ 0%     │ 2.5 MB   │
└─────────────┴────┴───────┴────────┴────────┴─────┴────────┴──────────┘
 Use `pm2 show ` to get more details about an app
[PM2] Saving current process list...
[PM2] Successfully saved in /home/pi/.pm2/dump.pm2

We're ready! Restart your Pi Zero to start your MagicMirror.


pi@raspberrypi:~ $ sudo login as: pi
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Mon Jan  7 20:33:42 2019
pi@raspberrypi:~ $ bash -c "$(curl -sL https://raw.githubusercontent.com/ac2799/     MagicMirror/master/installers/raspberry.sh)"

$$\      $$\                     $$\           $$\      $$\ $$\                                               $$$$$$\
$$$\    $$$ |                    \__|          $$$\    $$$ |\__|                                             $$  __$$\
$$$$\  $$$$ | $$$$$$\   $$$$$$\  $$\  $$$$$$$\ $$$$\  $$$$ |$$\  $$$$$$\   $$$$$     $\   $$$$$$\   $$$$$$\  \__/  $$ |
$$\$$\$$ $$ | \____$$\ $$  __$$\ $$ |$$  _____|$$\$$\$$ $$ |$$ |$$  __$$\ $$  __     $$\ $$  __$$\ $$  __$$\  $$$$$$  |
$$ \$$$  $$ | $$$$$$$ |$$ /  $$ |$$ |$$ /      $$ \$$$  $$ |$$ |$$ |  \__|$$ |       \__|$$ /  $$ |$$ |  \__|$$  ____/
$$ |\$  /$$ |$$  __$$ |$$ |  $$ |$$ |$$ |      $$ |\$  /$$ |$$ |$$ |      $$ |           $$ |  $$ |$$ |      $$ |
$$ | \_/ $$ |\$$$$$$$ |\$$$$$$$ |$$ |\$$$$$$$\ $$ | \_/ $$ |$$ |$$ |      $$ |           \$$$$$$  |$$ |      $$$$$$$$\
\__|     \__| \_______| \____$$ |\__| \_______|\__|     \__|\__|\__|      \__|            \______/ \__|      \________|
                       $$\   $$ |
                       \$$$$$$  |
                        \______/

If you are running a Pi Zero, installation will continue, but you will have to r     un in server only mode.
Updating packages ...
Stary:1 http://archive.raspberrypi.org/debian stretch InRelease
Stary:2 http://raspbian.raspberrypi.org/raspbian stretch InRelease
Czytanie list pakietów... Gotowe
Czytanie list pakietów... Gotowe
Budowanie drzewa zależności
Odczyt informacji o stanie... Gotowe
Obliczanie aktualizacji... Gotowe
0 aktualizowanych, 0 nowo instalowanych, 0 usuwanych i 0 nieaktualizowanych.
E: Nie udało się otworzyć pliku blokady /var/lib/dpkg/lock - open (13: Brak dost     ępu)
E: Nie udało się zablokować katalogu administracyjnego (/var/lib/dpkg/), czy uży     to uprawnień administratora?
Update failed, carrying on installation ...
Installing helper tools ...
Czytanie list pakietów... Gotowe
Budowanie drzewa zależności
Odczyt informacji o stanie... Gotowe
build-essential is already the newest version (12.3).
curl is already the newest version (7.52.1-5+deb9u8).
git is already the newest version (1:2.11.0-3+deb9u4).
unzip is already the newest version (6.0-21).
wget is already the newest version (1.18-5+deb9u2).
0 aktualizowanych, 0 nowo instalowanych, 0 usuwanych i 0 nieaktualizowanych.
Check current Node installation ...
Node.js is not installed.
Installing Node.js ...
Downloading node v11.6.0
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 17.0M  100 17.0M    0     0   861k      0  0:00:20  0:00:20 --:--:--  968k
Extracting node v11.6.0
Extracting node and npm
Czytanie list pakietów... Gotowe
Budowanie drzewa zależności
Odczyt informacji o stanie... Gotowe
git is already the newest version (1:2.11.0-3+deb9u4).
0 aktualizowanych, 0 nowo instalowanych, 0 usuwanych i 0 nieaktualizowanych.
Czytanie list pakietów... Gotowe
Budowanie drzewa zależności
Odczyt informacji o stanie... Gotowe
Zostaną zainstalowane następujące NOWE pakiety:
  unclutter
0 aktualizowanych, 1 nowo instalowanych, 0 usuwanych i 0 nieaktualizowanych.
Konieczne pobranie 16,6 kB archiwów.
Po tej operacji zostanie dodatkowo użyte 47,1 kB miejsca na dysku.
Pobieranie:1 http://ftp.icm.edu.pl/pub/Linux/distributions/raspbian/raspbian str     etch/main armhf unclutter armhf 8-20 [16,6 kB]
Pobrano 16,6 kB w 1s (14,1 kB/s)
Prekonfiguracja pakietów ...
Wybieranie wcześniej niewybranego pakietu unclutter.
(Odczytywanie bazy danych ... 80763 pliki i katalogi obecnie zainstalowane.)
Przygotowywanie do rozpakowania pakietu .../unclutter_8-20_armhf.deb ...
Rozpakowywanie pakietu unclutter (8-20) ...
Konfigurowanie pakietu unclutter (8-20) ...
Przetwarzanie wyzwalaczy pakietu man-db (2.7.6.1-2)...
Cloning MagicMirror ...
Cloning into 'MagicMirror'...
remote: Enumerating objects: 305, done.
remote: Counting objects: 100% (305/305), done.
remote: Compressing objects: 100% (273/273), done.
remote: Total 305 (delta 37), reused 169 (delta 22), pack-reused 0
Receiving objects: 100% (305/305), 614.71 KiB | 747.00 KiB/s, done.
Resolving deltas: 100% (37/37), done.
Cloning MagicMirror Done!
Installing dependencies ...
npx: zainstalowano 405 w 218.392s
npm notice CANARY npmc is experimental software. If you find an issue, please fi     le it in the main npm repository, and call out that you were using npmc.
npm WARN deprecated time-grunt@2.0.0: Deprecated because Grunt is practically un     maintained. Move on to something better. This package will continue to work with      Grunt v1, but it will not receive any updates.
npm WARN deprecated nomnom@1.8.1: Package no longer supported. Contact support@n     pmjs.com for more info.

> electron-chromedriver@1.8.0 install /home/pi/MagicMirror/node_modules/electron     -chromedriver
> node ./download-chromedriver.js

successfully dowloaded and extracted!

> electron@2.0.16 postinstall /home/pi/MagicMirror/node_modules/electron
> node install.js

Downloading SHASUMS256.txt
[============================================>] 100.0% of 5.39 kB (5.39 kB/s)

> magicmirror@2.6.0 install /home/pi/MagicMirror
> cd vendor && npm install

npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@1.2.4 (node_modules/fse     vents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@     1.2.4: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"}     )

added 82 packages from 57 contributors and audited 220 packages in 118.631s
found 3 low severity vulnerabilities
  run `npm audit fix` to fix them, or `npm audit` for details

> magicmirror@2.6.0 postinstall /home/pi/MagicMirror
> sh installers/postinstall/postinstall.sh && npm run install-fonts

MagicMirror installation successful!

> magicmirror@2.6.0 install-fonts /home/pi/MagicMirror
> cd fonts && npm install

added 1 package from 1 contributor and audited 1 package in 42.42s
found 0 vulnerabilities

npm WARN grunt-stylelint@0.10.1 requires a peer of stylelint@^9.0.0 but none is      installed. You must install peer dependencies yourself.
npm WARN acorn-jsx@5.0.1 requires a peer of acorn@^6.0.0 but none is installed.      You must install peer dependencies yourself.

added 921 packages from 1366 contributors in 1049.638s
Errors while installing dependencies! (source command: npmc@latest install)
npm WARN grunt-stylelint@0.10.1 requires a peer of stylelint@^9.0.0 but none is      installed. You must install peer dependencies yourself.

+ acorn@6.0.5
added 2 packages from 78 contributors, updated 1 package and audited 2467 packag     es in 175.814s
found 8 vulnerabilities (7 low, 1 high)
  run `npm audit fix` to fix them, or `npm audit` for details
Errors while installing dependencies! (source command: npm install acorn@latest)
+ stylelint@9.9.0
added 155 packages from 107 contributors, removed 32 packages, updated 99 packages, moved 6 packages and audited 4452 packages in 458.975s
found 4 vulnerabilities (3 low, 1 high)
  run `npm audit fix` to fix them, or `npm audit` for details
Errors while installing dependencies! (source command: pm install stylelint@latest)
+ jshint@2.9.7
added 2 packages from 1 contributor, removed 6 packages and updated 5 packages in 226.509s
fixed 3 of 4 vulnerabilities in 4452 scanned packages
  1 vulnerability required manual review and could not be updated
Vulnerabilities may remain!
Check plymouth installation ...
Splashscreen: Checking themes directory.
Splashscreen: Create theme directory if not exists.
Splashscreen: Theme copied successfully.
Splashscreen: Changed theme to MagicMirror successfully.
Do you want usHasło:

Nieprawidłowe logowanie
raspberrypi login: rror (y/N)?y
/usr/local/bin/pm2 -> /usr/local/lib/node_modules/pm2/bin/pm2
/usr/local/bin/pm2-dev -> /usr/local/lib/node_modules/pm2/bin/pm2-dev
/usr/local/bin/pm2-docker -> /usr/local/lib/node_modules/pm2/bin/pm2-docker
/usr/local/bin/pm2-runtime -> /usr/local/lib/node_modules/pm2/bin/pm2-runtime
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@1.2.4 (node_modules/pm2/node_modules/fsevents):
npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for fsevents@1.2.4: wanted {"os":"darwin","arch":"any"} (current: {"os":"linux","arch":"arm"})

+ pm2@3.2.4
added 313 packages from 246 contributors in 320.301s

                        -------------

__/\\\\\\\\\\\\\____/\\\\____________/\\\\____/\\\\\\\\\_____
 _\/\\\/////////\\\_\/\\\\\\________/\\\\\\__/\\\///////\\\___
  _\/\\\_______\/\\\_\/\\\//\\\____/\\\//\\\_\///______\//\\\__
   _\/\\\\\\\\\\\\\/__\/\\\\///\\\/\\\/_\/\\\___________/\\\/___
    _\/\\\/////////____\/\\\__\///\\\/___\/\\\________/\\\//_____
     _\/\\\_____________\/\\\____\///_____\/\\\_____/\\\//________
      _\/\\\_____________\/\\\_____________\/\\\___/\\\/___________
       _\/\\\_____________\/\\\_____________\/\\\__/\\\\\\\\\\\\\\\_
        _\///______________\///______________\///__\///////////////__


                          Runtime Edition

        PM2 is a Production Process Manager for Node.js applications
                     with a built-in Load Balancer.

                Start and Daemonize any application:
                $ pm2 start app.js

                Load Balance 4 instances of api.js:
                $ pm2 start api.js -i 4

                Monitor in production:
                $ pm2 monitor

                Make pm2 auto-boot at server restart:
                $ pm2 startup

                To go further checkout:
                http://pm2.io/


                        -------------

[PM2] Init System found: systemd
Platform systemd
Template
[Unit]
Description=PM2 process manager
Documentation=https://pm2.keymetrics.io/
After=network.target

[Service]
Type=forking
User=pi
LimitNOFILE=infinity
LimitNPROC=infinity
LimitCORE=infinity
Environment=PATH=/usr/local/bin:/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin
Environment=PM2_HOME=/home/pi/.pm2
PIDFile=/home/pi/.pm2/pm2.pid

ExecStart=/usr/local/lib/node_modules/pm2/bin/pm2 resurrect
ExecReload=/usr/local/lib/node_modules/pm2/bin/pm2 reload all
ExecStop=/usr/local/lib/node_modules/pm2/bin/pm2 kill

[Install]
WantedBy=multi-user.target

Target path
/etc/systemd/system/pm2-pi.service
Command list
[ 'systemctl enable pm2-pi' ]
[PM2] Writing init configuration in /etc/systemd/system/pm2-pi.service
[PM2] Making script booting at startup...
[PM2] [-] Executing: systemctl enable pm2-pi...
Created symlink /etc/systemd/system/multi-user.target.wants/pm2-pi.service → /etc/systemd/system/pm2-pi.service.
[PM2] [v] Command successfully executed.
+---------------------------------------+
[PM2] Freeze a process list on reboot via:
$ pm2 save

[PM2] Remove init script via:
$ pm2 unstartup systemd

                        -------------

__/\\\\\\\\\\\\\____/\\\\____________/\\\\____/\\\\\\\\\_____
 _\/\\\/////////\\\_\/\\\\\\________/\\\\\\__/\\\///////\\\___
  _\/\\\_______\/\\\_\/\\\//\\\____/\\\//\\\_\///______\//\\\__
   _\/\\\\\\\\\\\\\/__\/\\\\///\\\/\\\/_\/\\\___________/\\\/___
    _\/\\\/////////____\/\\\__\///\\\/___\/\\\________/\\\//_____
     _\/\\\_____________\/\\\____\///_____\/\\\_____/\\\//________
      _\/\\\_____________\/\\\_____________\/\\\___/\\\/___________
       _\/\\\_____________\/\\\_____________\/\\\__/\\\\\\\\\\\\\\\_
        _\///______________\///______________\///__\///////////////__


                          Runtime Edition

        PM2 is a Production Process Manager for Node.js applications
                     with a built-in Load Balancer.

                Start and Daemonize any application:
                $ pm2 start app.js

                Load Balance 4 instances of api.js:
                $ pm2 start api.js -i 4

                Monitor in production:
             Hasło:

after reboot server work properly. If I connect from my computer webbrowser everythings is fine.
On local LCD raspberry load to desktop and do not run chromium (default browser)

sorry for 2 post one by one.

Big11 · Jan 8, 2019, 7:13 PM

@andyc7687

i run just

bash -c “$(curl -sL https://raw.githubusercontent.com/ac2799/MagicMirror/master/installers/raspberry.sh)”

don’t know if this leads to bare or Pi0 …

This is your “modified” installer script also for the Pi0…

andyc7687 · Jan 8, 2019, 7:46 PM

@big11 this goes to my forked repo. Are you booting through to the desktop or to the console?

Big11 · Jan 9, 2019, 9:56 AM

@andyc7687

so since yesterday i installed many times from Scratch but without success……

With your script i ran into Troubles with a lot of Errors…

missing dependencies….

so i suggest to do more steps after “sudo apt INSTALL --fix-missing” -> “apt UPGRADE --fix-missing” does not work…

sudo dpkg –configure -a. and.
sudo apt install -f.

at npm install a lot of Warnings e.g.

npm WARN grunt-stylelint@0.10.1 requires a peer of stylelint@^9.0.0 but none is installed. You must install peer dependencies yourself.
npm WARN acorn-jsx@5.0.1 requires a peer of acorn@^6.0.0 but none is installed. You must install peer dependencies yourself.

added 921 packages from 1366 contributors and audited 2466 packages in 859.404s
found 8 vulnerabilities (7 low, 1 high)
  run `npm audit fix` to fix them, or `npm audit` for details
Errors while installing dependencies! (source command: npmc@latest install)

+ stylelint@9.9.0
added 156 packages from 107 contributors, removed 32 packages, updated 99 packages, moved 6 packages and audited 4452 packages in 370.707s
found 4 vulnerabilities (3 low, 1 high)
  run `npm audit fix` to fix them, or `npm audit` for details
Errors while installing dependencies! (source command: pm install stylelint@latest)

pi@magicpi:~ $   run `npm audit fix` to fix them, or `npm audit` for details
npm ERR! code EAUDITNOPJSON
npm ERR! audit No package.json found: Cannot audit a project without a package.json

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/pi/.npm/_logs/2019-01-09T07_05_26_138Z-debug.log
npm ERR! code EAUDITNOPJSON
npm ERR! audit No package.json found: Cannot audit a project without a package.json

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/pi/.npm/_logs/2019-01-09T07_05_35_497Z-debug.log
-bash: run: Kommando nicht gefunden.
pi@magicpi:~ $ Errors while installing dependencies! (source command: pm install stylelint@latest)
-bash: Syntaxfehler beim unerwarteten Wort `('

i could fix this with

"npm audit fix" or "npm audit fix --force" in directory MagicMirror

and then i figured out autostart with PM2 as described in MM-Wiki but…

it won’t start …

as done in the guide i created a mm.sh script und configured this for autostart with pm2

at next start Nothing happens to start MagicMirror localy

a “pm2 logs mm”

Shows a loop of “sh run-start.sh”

|mm       | > magicmirror@2.6.0 start /home/pi/MagicMirror
0|mm       | > sh run-start.sh
0|mm       |
0|mm       |
0|mm       | > magicmirror@2.6.0 start /home/pi/MagicMirror
0|mm       | > sh run-start.sh
0|mm       |
0|mm       |
0|mm       | > magicmirror@2.6.0 start /home/pi/MagicMirror
0|mm       | > sh run-start.sh
0|mm       |
0|mm       |
0|mm       | > magicmirror@2.6.0 start /home/pi/MagicMirror
0|mm       | > sh run-start.sh

a cat to run-start.sh Shows

pi@magicpi:~/MagicMirror $ cat run-start.sh
if [ -z "$DISPLAY" ]; then #If not set DISPLAY is SSH remote or tty
        export DISPLAY=:0 # Set by default display
fi
electron js/electron.js $1

!!!
but electron.js isn’t installed

trying manually install this with

sudo npm install electron -g

ended again in Error-Messages

Error: EACCES: permission denied, mkdir '/usr/local/lib/node_modules/electron/.electron'
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! electron@4.0.1 postinstall: `node install.js`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the electron@4.0.1 postinstall script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /root/.npm/_logs/2019-01-09T09_13_51_893Z-debug.log

so… now i’m giving up for These days….

does anybody know where my Failure is ??

Thank you

andyc7687 · Jan 9, 2019, 3:24 PM

@big11 I did a test install today, so I’m really not sure what you are doing.

You will notice that the missing dependencies are installed in subsequent steps (e.g. there’s a problem with style lint and acorn. This is then fixed (see where it says + stylelint@9.9.0 and + acorn lower down in your warnings).

This installation is completely different from the MM-Wiki. It does not use sh run-start.sh at all. Therefore there may well be problems.

Can I ask, are you doing your installation over SSH/Telnet? or on the Pi itself? because you keep mentioning ‘locally’ and I just want to make sure I know what you mean by that.

Edit: Also, don’t use npm install in sudo; it should be run as the normal user

Big11 · Jan 9, 2019, 5:50 PM

@andyc7687

as for your Question

i’m installing over SSH but start it then directly on the Pi0…

i will i try a new Installation by now…

normally i don’t run “npm install” as root…
don’t know if i wrote so…

Big11 · Jan 10, 2019, 7:16 AM

@big11

thats my “achievment” from last night…

pi@raspberrypi:~ $ cd MagicMirror/
pi@raspberrypi:~/MagicMirror $ npm start

> magicmirror@2.6.0 start /home/pi/MagicMirror
> sh run-start.sh

run-start.sh: 4: run-start.sh: electron: not found
npm ERR! file sh
npm ERR! code ELIFECYCLE
npm ERR! errno ENOENT
npm ERR! syscall spawn
npm ERR! magicmirror@2.6.0 start: `sh run-start.sh`
npm ERR! spawn ENOENT
npm ERR!
npm ERR! Failed at the magicmirror@2.6.0 start script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/pi/.npm/_logs/2019-01-10T07_11_11_053Z-debug.log
pi@raspberrypi:~/MagicMirror $