Read the statement by Michael Teeuw here.
Microphone/MMM-voice Help
-
@tnp0327 can u minimize the mirror and look at the console log of the terminal window… maybe there is some other error…
minimize = alt-spacebar, n
-
@sdetweil @strawberry-3-141 so I did not find a debug file but was able to follow the instructions to look at the console log and the only message I am seeing regarding MMM-voice is:
Starting module: MMM-voice MMM-voice.js:82
MMM-voice is waiting for voice command registrations. MMM-voice.js:85 -
@tnp0327 before the modules is the startup of the node_helpers… if u can scroll back up the console window, you might find something else…
have u tested to make sure the mic is working? with the rec command?
rec somefile.wav
on the bottom of the console window should be a meter like bar that moves when u speak…
then you can control-z out of the rec command and then play somefile.wav to see how it sounds… -
OMW to work now - will run it again later and update with my feedback. Thanks for the help so far.
-
@tnp0327 I am going through same thing,it displays mic flashing symbol and just says initialising and undefined at bottom(if degug:true).Did you resolve it?please let me how to make it work?
Thanks -
@abhilash1368 do you have content in your debug log file?
-
@strawberry-3-141 I don’t see any content,but its working now.Initially I have my own custom twitter module loaded along with MMM-voice(my twitter.js is not modified yet to support MMM-voice). Once after making changes to my twitter.js according to “Hey Lucy” documentation to receive voice notifications,then it is started working. Thanks
-
@strawberry-3-141 Ok so i have a very similar situation i have AlexaPi (and MMM-AlexaPi for visual feedback) and want to use MMM-voice and Hello-Lucy. I have 2 USB microphones (a webcam that i talk to AlexaPI and a USB sound card that i want to use for MMM-voice)
On the config.js i have assigned microphone id of 2 for MMM-voice ( arecord -l and the install of MMM-voice show that alsa as 0 USB webcam as card 1 and USB sound card as card 2)
when i start magic mirror MMM-voice says “initializing” than briefly “Waiting for module commands” than settles on “error”
My questions are:- and i am pretty sure i have an answer for this is that AlexaPi and MMM-voice can they use the same mic or not … most likely not .
- why isn’t using microphone #2 straight forward do i have to twitch anything on alsa config, etc will pulse audio be better and what is the difference ?? how do we mitigate this problem??
I have tested and confirmed that both usb microphones work when they are plugged each by themselves but not when they are both simultaneously plugged in only the webcam would record … i am not sure if i am putting the right parameter here “arecord hw:1,0 -d 10 /tmp/test-mic.wav”
Please any help will be greatly appreciated
Denis -
I too am trying to get Hello-Lucy/Voice to work with my usb soundcard and microphone. I can record outside of MagicMirror so that works but I have the same problem:
“displays mic flashing symbol and just says initialising and undefined at bottom”
I have tried following the documentation but still no luck
Anyone get Hello-Lucy to work?
-
@TheGeekfather use arecord -l and lsusb to find the hw: device id needed…
-
@TheGeekfather
@sdetweil
@cowboysdudeMy apologies, gentlemen. There is a problem with the mic upon install that seems to be specific to the Pi. @cowboysdude did an install late last night and he encountered the same issue, so forgive me. I am looking at it right now and will not sleep until it is resolved. Not!
Seriously, it will be fixed ASAP.
Thank you for your patience and interest.
-
AWESOME - it is such a great module and to get the mic working would be great !!!
-
Sorry about the trouble, man. Totally my fault. Thanks for your patience and interest
-
Please try adding
microphone: "0",to your config entry. If that does not work please trymicrophone: "1",EXAMPLE: Just add the microphone line.
keyword: 'HELLO LUCY', microphone: "0", timeout: 7, -
It says Initializing “undefined” with line through flashing mic icon with both 0 and 1
-
Hmm, ok, working on it
-
When I try “0” no flashing mic but still “undefined”
I can hear “hello Michael what would you like to see” and then say “Hello Lucy”
but no mic input
mic works - tried arecord
-
Understood. Lets move this to the Hello-Lucy topic, if you don’t mind
https://forum.magicmirror.builders/topic/6241/hello-lucy/192
-
Yes :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login