Adding Modules... Please Please advise

[A Former User]

Strange these modules have not been pre- code checked before uploading to GH…?

I’ve updated my script as been adding other modules, and getting errors or just “loading”…

have added /// pre module lines to highlight the ones that i am having issues with …

var config = {
port: 8080,

language: 'en',
timeFormat: 12,
units: 'metric',

modules: [
	{
		module: 'alert'
	},
	{
		module: 'clock',
		position: 'top_left',
	},
	{
		module: 'calendar',
		header: 'British Holidays',
		position: 'top_left',
		config: {
			calendars: [
				{
					symbol: 'calendar-check-o ',
					url: 'webcal://www.calendarlabs.com/templates/ical/UK-Holidays.ics'
				}
			]
		}
	},
	{
		module: 'compliments',
		position: 'lower_third',
	},
	{
		module: 'currentweather',
		position: 'top_right',
		config: {
			location: 'Phuket',
			locationID: '1151254',  //ID from http://www.openweathermap.org
			appid: '297ccc98662ac6f508ac9e47c549a716'
		}
	},
	{
		module: 'weatherforecast',
		position: 'top_right',
		header: 'Weather huh!',
		config: {
            location: 'Phuket',
			locationID: '1151254',  //ID from http://www.openweathermap.org
            appid: '297ccc98662ac6f508ac9e47c549a716'
		}
	},
	{
		module: 'newsfeed',
		position: 'bottom_bar',
		config: {
			feeds: [
				{
					title: "Bloomberg",
					url: "https://www.bloomberg.com/feeds/podcasts/etf_report.xml"
				}
			],
			showSourceTitle: true,
			showPublishDate: true
		}
	},
			{
		module: 'newsfeed',
		position: 'bottom_bar',
		config: {
			feeds: [
				{
					tittle: "BBC Sci-Tech",
					url: "http://feeds.bbci.co.uk/news/video_and_audio/technology/rss.xml?edition=uk"
				}
			],
			showSourceTitle: true,
			showPublishDate: true
		}
	},
	{
		module: 'MMM-Instagram',
		position: 'top_right',
		config: {
    	access_token: 'e897699215d0464f9aac278e4fdc25ba',
    	count: 20,  
    	min_timestamp: 0,
    	animationSpeed: 2500,
    	updateInterval: 12500
    	}
    },

/// {
/// module: ‘MMM-Carousel’,
/// config: {
/// // See below for configurable options
/// }
/// },
/// {
/// module: ‘camera’,
/// position: ‘top_center’,
/// config: selfieInterval: 3, // Time interval in seconds before the photo will be taken.
/// emailConfig: {
/// service: ‘gmail’, // Email provider to use to send email with a photo.
/// auth: {
/// user: ‘xxxx@xxx.com’, // Your email account
/// pass: ‘’ // Your password for email account
/// }
/// },
/// {
/// module: ‘voicecontrol’,
/// position: ‘bottom_left’,
/// config: {
/// models: [
/// {
/// keyword: “Show Camera”,
/// description: “Say ‘Show Camera’ to display camera”,
/// file: “showCamera.pmdl”,
/// message: “SHOW_CAMERA”
/// },
/// {
/// keyword: “Hide Camera”,
/// description: “Say ‘Hide Camera’ to hide camera”,
/// file: “hideCamera.pmdl”,
/// message: “HIDE_CAMERA”
/// },
/// {
/// keyword: “Selfie”,
/// description: “Say ‘Selfie’ when camera is visible”,
/// file: “selfie.pmdl”,
/// message: “SELFIE”
/// }
/// },
]
};
/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== ‘undefined’) {module.exports = config;}

[strawberry 3.141]

@wjdw87 you’re missing curly braces for config in the camera module

[A Former User]

Curley braces where sorry?

[KirAsh4]

Guys, use proper formatting for your code! (edited to add: when posting on the forums - not in your config files)

Block code is done with ```on a line by itself, then your code, and closed with another ``` on a line by itself again. This is not the same as an apostrophe! It’s called a 'back tick' or 'accent grave' and can be found to the left of the numerical number 1 at the top on a US keyboard. Please use it! It makes reading your config files a lot easier.

On non-US keyboards, um, its location will vary. You can also press and hold your ALT key, and using the numerical pad, enter 9 followed by 6, then let go of the ALT key. Repeat that three times and you get the three back ticks necessary.

[A Former User]

link text My config

[A Former User]

/// as used instead of ``` as they crash my system (the modules) just blank screen, will be removed when the issue is resolved.

[bhepler]

@wjdw87 Why do you have the newsfeed module specified twice? You have:

{
	module: 'newsfeed',
	position: 'bottom_bar',
	config: {
		feeds: [
			{
				title: "Bloomberg Baby!",
				url: "https://www.bloomberg.com/feeds/podcasts/etf_report.xml"
			}
		],
		showSourceTitle: true,
		showPublishDate: true
	}
},
{
	module: 'newsfeed',
	position: 'bottom_bar',
	config: {
		feeds: [
			{
				tittle: "BBC Sci-Tech",
				url: "http://feeds.bbci.co.uk/news/video_and_audio/technology/rss.xml?edition=uk"
			}
		],
		showSourceTitle: true,
		showPublishDate: true
	}
},

Would it not make more sense to just put both feeds in the feed array?

{
    module: 'newsfeed',
    position: 'bottom_bar',
    config: {
        feeds: [
            {
                title: "Bloomberg Baby!",
                url: "https://www.bloomberg.com/feeds/podcasts/etf_report.xml"
            },
            {
                title: "BBC Sci-Tech",
		url: "http://feeds.bbci.co.uk/news/video_and_audio/technology/rss.xml?edition=uk"
            }
        ],
        showSourceTitle: true,
        showPublishDate: true
    }
}

(Also, you misspelled “title” in your second newsfeed. You have an extra “t”.)

[A Former User]

@bhepler said in Adding Modules... Please Please advise:

@wjdw87 Why do you have the newsfeed module specified twice? You have:

{
	module: 'newsfeed',
	position: 'bottom_bar',
	config: {
		feeds: [
			{
				title: "Bloomberg Baby!",
				url: "https://www.bloomberg.com/feeds/podcasts/etf_report.xml"
			}
		],
		showSourceTitle: true,
		showPublishDate: true
	}
},
{
	module: 'newsfeed',
	position: 'bottom_bar',
	config: {
		feeds: [
			{
				tittle: "BBC Sci-Tech",
				url: "http://feeds.bbci.co.uk/news/video_and_audio/technology/rss.xml?edition=uk"
			}
		],
		showSourceTitle: true,
		showPublishDate: true
	}
},

Would it not make more sense to just put both feeds in the feed array?

{
    module: 'newsfeed',
    position: 'bottom_bar',
    config: {
        feeds: [
            {
                title: "Bloomberg Baby!",
                url: "https://www.bloomberg.com/feeds/podcasts/etf_report.xml"
            },
            {
                title: "BBC Sci-Tech",
		url: "http://feeds.bbci.co.uk/news/video_and_audio/technology/rss.xml?edition=uk"
            }
        ],
        showSourceTitle: true,
        showPublishDate: true
    }
}

(Also, you misspelled “title” in your second newsfeed. You have an extra “t”.)

you can add them to the same array?

[bhepler]

@wjdw87 Indeed, you can. The documentation for the newsfeed module gives a simple example.

[A Former User]

Ah cool, updated that, but still have issues around the modules i’ve /// out

much appreciated though!