Fresh Install

johnnyboy

@johnnyboy ok, watching for your feedback

Okay, I renamed original MM folder, and did your install - bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/raspberry.sh)”

This took a long time and initially thought Pi had froze, so went off and did a few things.
Came back and looked as if everything installed, and it was awaiting me to enter y/n about splashscreen/autostart… so tried to enter y… but the Pi had froze by that point.

Pulled the power, and Pi restarted, then went to desktop, and then to MM… so I take it that all went well?

I checked version and OS — 2.11.0… Raspbian GNU/Linux 9.11 { Stretch }

So, is that it?.. has it all went okay? and I can now start playing about adding/changing modules?

How do I change screen to Portrait again?

sdetweil

@johnnyboy well, the last two steps didn’t finish, pm2 (autostart) and screen saver

u can find separate scripts on my repo for those

system change the screen to portrait? that changed too from boot long ago?
https://clevertap.com/blog/using-raspberry-pi-to-build-a-commercial-grade-wall-information-dashboard/#:~:text=To change the orientation%2C set,display_rotate%3D3 and reboot again.

johnnyboy

@sdetweil

u can find separate scripts on my repo for those

Will do those

system change the screen to portrait? that changed too from boot long ago?
https://clevertap.com/blog/using-raspberry-pi-to-build-a-commercial-grade-wall-information-dashboard/#:~:text=To change the orientation%2C set,display_rotate%3D3 and reboot again.

Ok, I went to the Boot/config.txt… entered the display_rotate=1 and tried to save but says cannot?
Rebooted but still in landscape and my entry not saved in boot.

Where am I going wrong?

sdetweil

@johnnyboy stuff in /boot, /etc are protected, so you have to use the sudo comand
nano is the editor
sudo nano /boot/config.txt

johnnyboy

@sdetweil
Sorry … I must have missed something?

Pi@raspberrypi:~ S sudo nano/boot/config.txt

sudo: nano/boot/config.txt : command not found

Pi@raspberrypi:~ S sudonano/boot/config.txt

Bash: sudonano/boot/config.tx : no such file or directory

BKeyport

FWIW, I would have started with a fresh image. whenever I’m working with a system that’s not been used in a while, I grab what I can and start the OS over fresh, it just seems to work better.

johnnyboy

@BKeyport
Am I entering the correct text into Terminal?
Is path right? Is spacing right?

Unsure here so trying all sorts to no avail

sdetweil

@johnnyboy said in Fresh Install:

udonano/boot/config.txt

always a space between command and path

sudo nano /boot/config.txt

sdetweil

@BKeyport he has a some mods… so, trying to help get it up and running and find them

johnnyboy

@sdetweil said in Fresh Install:

@johnnyboy said in Fresh Install:

udonano/boot/config.txt

always a space between command and path
sudo nano /boot/config.txt

Thanks… that got me in… i entered that txt in a space… rebooted… and still in landscape?

Tried again, entered sudo nano /boot/config.txt … same as you say with spaces… but now the terminal text that wss within the config has gone… and at bottom it says [Directory ‘boot’ does not exist ]

I then look in the boot folder, and i now have - config.tx… config.txt save 1… config.txt save 2… and config.tct save 3 and within all 3 saved ones, it shows - display_rotate=1