MMM-HomeAssistant-Sensors (Development) - Show your HA Sensors on your Mirror

[sdetweil]

@iorifly see this module

[RdP]

I get an error:

My config is like this:

{
	module: 'MMM-homeassistant-sensors',
	position: 'top_left',
	config: {
		host: "192.168.0.185",
		port: "8123",
		https: false,
		token: "eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpiJmMmVQ4ODM0NzViYmQ4NzdlZTdlYmsImlhdCI6MTU5MjM5NjYxOSwiZXhwIjoxOTA3NzU2NjE5fQ.CxGIZP-TPWWZAFuNx3UV-sucjg8j8885ia00gCiG4vGg",
		values: [
			{
				sensor: "sensor.jacuzzi_temperatuur",
			},
		]
	    }
    },

Any help is more than welcome

[RaspiManu]

@RdP I would recommend editing your token out when posting code.

[RdP]

@RaspiManu

I did use a dummy token

[JohnBachini]

@RdP anything in the logs of home assistant ?

I use this module and does work.

[RdP]

@JohnBachini said in MMM-HomeAssistant-Sensors (Development) - Show your HA Sensors on your Mirror:

@RdP anything in the logs of home assistant ?

I use this module and does work.

Nothing in the HA logs :-(

[RdP]

@RdP said in MMM-HomeAssistant-Sensors (Development) - Show your HA Sensors on your Mirror:

I get an error:

My config is like this:

{
	module: 'MMM-homeassistant-sensors',
	position: 'top_left',
	config: {
		host: "192.168.0.185",
		port: "8123",
		https: false,
		token: "eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpiJmMmVQ4ODM0NzViYmQ4NzdlZTdlYmsImlhdCI6MTU5MjM5NjYxOSwiZXhwIjoxOTA3NzU2NjE5fQ.CxGIZP-TPWWZAFuNx3UV-sucjg8j8885ia00gCiG4vGg",
		values: [
			{
				sensor: "sensor.jacuzzi_temperatuur",
			},
		]
	    }
    },

Any help is more than welcome

Bump… Is there anyone who can point me in the right direction?

[sdetweil]

@RdP I don’t know anything about module, just asking questions

it was working and stopped? or is this the 1st time?

if u look at the logs (console, npm start, pm2 logs) or the developers window, ctrl-shift-i, select the console tab and scroll up to see any errors, usually red text, do you see anything?

[smoysauce]

Love this module, I am just trying to figure out if it possible to merge the attribute pieces from this fork: https://github.com/moejetz/MMM-homeassistant-sensors with this one: to allow adding attributes. I’m trying to read up on how to do it, but not sure if it’s a lot of work to do or if there is an easy way to do it. I’m also checking for any guidance in the help forum. Any help would be appreciated!

[NLCarrII]

@RdP

I had this last night and I got frustrated and shutdown the mirror and re-opened it via terminal and it worked. I only tested with one sensor. Then I added another sensor and I didn’t have to restart to have it show it up. Not sure what changed, but this might work for you. Something else I did was not install the right one TWICE, I instralled them as they appeared in the list on Github and found out about their issues, which caused me to install the next one and so on. At least I got experience installing modules. This was the last one I installed and I have a lock and a sensor displaying now. More to Come.