MMM-NewPIR v3

[A Former User]

@lolo ecoMode Feature hide all modules (disable modules), after maybe your globe module have a bug on disable/resume (this fonction is a function coded in the core of MM)

[lolo]

Thx. Even one my module have problem with that. For now I will keep it as false.

[bdream]

It’s working :smiling_face_with_open_mouth:

After a couple of tries with all available PIR Modules it’s working with MMM-NewPIR perfect!
Many thanks!

[bdream]

…Ohh no.
Getting update notification for MMM-NewPIR.

I’m trying in MagicMirror/modules/MMM-NewPIR

git pull

but get the message “it’s actual already”

Notification message still there.

Any idea please?

[Fozi]

I had the same. After

git pull

Enter

mom run update

and reboot.

[bdream]

where to run mom run update?
I tried in home, MagicMirror, modules and MMM-NewPIR
got th message

-bash: mom: Kommando nicht gefunden.

-bash: mom: Command not found.

[bdream]

Hast noone an Idea how to get rid of thus Update Message?

[lolo]

This should work

cd ~/MagicMirror/modules/MMM-NewPIR

git pull

npm run update

sudo reboot

[bdream]

@lolo it works!
Many thanks

Again this Forum ist so helpful 🥳

[ChrisDub]

Hey there Guys,
I´m stuck and I need your help.

My Code:

		{
			module: 'MMM-NewPIR',
			position: 'top_left',
			configDeepMerge: true,
				config: {
				debug: false,
				screen: {
					delay: 2 * 60 * 1000, // 2 * 60 * 1000 = 2 Minuten
					turnOffDisplay: true,
					mode: 1,
					ecoMode: true,
					displayCounter: true,
					text: "Auto Turn Off Screen:",
					displayBar: true,
					displayStyle: "SemiCircle",
					governorSleeping: false,
					displayLastPresence: true,
					LastPresenceText: "Last Presence:",
					useTouch: false,
					delayed: 0
						},
				pir: 	{
					usePir: true,
					gpio: 21,
					reverseValue: false
						}
					}
		 },	

My HC-SR501 Sensor is wired as following:
VCC (+5V) > GPIO PIN 2
OUT > GPIO PIN 21
GND > GPIO PIN 6

Problem:
The timer runs down, the display switches off and then stays black.
It seems as the movement is not recognized by the PIR.

I already tried another PIR, same failure.
Switching to another PIN > 22 with editing the config results with the same “failure”.

At the moment I don´t know, where the source of my problem is buried and I could use some help from you.

Thank you in advance

[MajorC]

@chrisdub have you activated the pins at your Raspberry OS?

[ChrisDub]

@majorc said in MMM-NewPIR v3:

@chrisdub have you activated the pins at your Raspberry OS?

Good morning.
To be honest, I don´t really know. Is there a special way to activate the PINS? Maybe via raspi-config?!

[MajorC]

@chrisdub https://lmgtfy.app/?q=raspberry+pi+activate+gpio :beaming_face_with_smiling_eyes:

[ChrisDub]

@majorc said in MMM-NewPIR v3:

@chrisdub https://lmgtfy.app/?q=raspberry+pi+activate+gpio :beaming_face_with_smiling_eyes:

Thank you for your fast answer, ´ve found some articles for activating the GPIOs.

I´ve followed this tutorial for testing my PIR Sensor: https://www.einplatinencomputer.com/raspberry-pi-pir-bewegungsmelder-ansteuern/

The author doesn´t mention, that activating the GPIOs is necessary. Now I´m a little bit confused.

When I´m starting the script, I´m getting the following output. When I´m moving in front of the sensor, nothing happens.

Just in case it helps, a picture from my setup:

[jordes]

can i add an exception module to not hide, while hiding all others?

[cowboysdude]

What is this module made for…RPI3 or RPI4?

[sdetweil]

@cowboysdude I don’t understand the question?

it supports all the different screen dimming approaches

[cowboysdude]

@sdetweil Thanks Sam.

[philmavedzenge]

Hi guys,

After updating my MagicMirror to the latest version, this modules does not work. I tried reinstalling but its giving an error that i do not understand. Could someone help please? I have attached the logs, not sure if they will help.

at Module._compile (internal/modules/cjs/loader.js:778:30)

npm WARN notsup Unsupported engine for electron-rebuild@3.2.3: wanted: {“node”:“>=12.13.0”} (current: {“node”:“10.24.0”,“npm”:“6.13.6”})
npm WARN notsup Not compatible with your version of node/npm: electron-rebuild@3.2.3
npm WARN notsup Unsupported engine for @malept/cross-spawn-promise@2.0.0: wanted: {“node”:“>= 12.13.0”} (current: {“node”:“10.24.0”,“npm”:“6.13.6”})
npm WARN notsup Not compatible with your version of node/npm: @malept/cross-spawn-promise@2.0.0
npm WARN notsup Unsupported engine for fs-extra@10.0.0: wanted: {“node”:“>=12”} (current: {“node”:“10.24.0”,“npm”:“6.13.6”})
npm WARN notsup Not compatible with your version of node/npm: fs-extra@10.0.0
npm WARN notsup Unsupported engine for yargs@17.2.1: wanted: {“node”:“>=12”} (current: {“node”:“10.24.0”,“npm”:“6.13.6”})
npm WARN notsup Not compatible with your version of node/npm: yargs@17.2.1

npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! @bugsounet/pir@1.0.6 postinstall: electron-rebuild
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the @bugsounet/pir@1.0.6 postinstall script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

[DJBOOB66]

@philmavedzenge said in MMM-NewPIR v3:

npm WARN notsup Unsupported engine for yargs@17.2.1: wanted: {“node”:“>=12”} (current: {“node”:“10.24.0”,“npm”:“6.13.6”})

You need to update npm and node