MMM-NewPIR v3

lolo

Thx. Even one my module have problem with that. For now I will keep it as false.

bdream

It’s working :smiling_face_with_open_mouth:

After a couple of tries with all available PIR Modules it’s working with MMM-NewPIR perfect!
Many thanks!

bdream

…Ohh no.
Getting update notification for MMM-NewPIR.

I’m trying in MagicMirror/modules/MMM-NewPIR

git pull

but get the message “it’s actual already”

Notification message still there.

Any idea please?

Fozi

I had the same. After

git pull

Enter

mom run update

and reboot.

bdream

where to run mom run update?
I tried in home, MagicMirror, modules and MMM-NewPIR
got th message

-bash: mom: Kommando nicht gefunden.

-bash: mom: Command not found.

bdream

Hast noone an Idea how to get rid of thus Update Message?

lolo

This should work

cd ~/MagicMirror/modules/MMM-NewPIR

git pull

npm run update

sudo reboot

bdream

@lolo it works!
Many thanks

Again this Forum ist so helpful 🥳

ChrisDub

Hey there Guys,
I´m stuck and I need your help.

My Code:

		{
			module: 'MMM-NewPIR',
			position: 'top_left',
			configDeepMerge: true,
				config: {
				debug: false,
				screen: {
					delay: 2 * 60 * 1000, // 2 * 60 * 1000 = 2 Minuten
					turnOffDisplay: true,
					mode: 1,
					ecoMode: true,
					displayCounter: true,
					text: "Auto Turn Off Screen:",
					displayBar: true,
					displayStyle: "SemiCircle",
					governorSleeping: false,
					displayLastPresence: true,
					LastPresenceText: "Last Presence:",
					useTouch: false,
					delayed: 0
						},
				pir: 	{
					usePir: true,
					gpio: 21,
					reverseValue: false
						}
					}
		 },

My HC-SR501 Sensor is wired as following:
VCC (+5V) > GPIO PIN 2
OUT > GPIO PIN 21
GND > GPIO PIN 6

Problem:
The timer runs down, the display switches off and then stays black.
It seems as the movement is not recognized by the PIR.

I already tried another PIR, same failure.
Switching to another PIN > 22 with editing the config results with the same “failure”.

At the moment I don´t know, where the source of my problem is buried and I could use some help from you.

Thank you in advance

MajorC

@chrisdub have you activated the pins at your Raspberry OS?