MMM-NewPIR v3

[ChrisDub]

@majorc said in MMM-NewPIR v3:

@chrisdub https://lmgtfy.app/?q=raspberry+pi+activate+gpio :beaming_face_with_smiling_eyes:

Thank you for your fast answer, ´ve found some articles for activating the GPIOs.

I´ve followed this tutorial for testing my PIR Sensor: https://www.einplatinencomputer.com/raspberry-pi-pir-bewegungsmelder-ansteuern/

The author doesn´t mention, that activating the GPIOs is necessary. Now I´m a little bit confused.

When I´m starting the script, I´m getting the following output. When I´m moving in front of the sensor, nothing happens.

Just in case it helps, a picture from my setup:

[jordes]

can i add an exception module to not hide, while hiding all others?

[cowboysdude]

What is this module made for…RPI3 or RPI4?

[sdetweil]

@cowboysdude I don’t understand the question?

it supports all the different screen dimming approaches

[cowboysdude]

@sdetweil Thanks Sam.

[philmavedzenge]

Hi guys,

After updating my MagicMirror to the latest version, this modules does not work. I tried reinstalling but its giving an error that i do not understand. Could someone help please? I have attached the logs, not sure if they will help.

at Module._compile (internal/modules/cjs/loader.js:778:30)

npm WARN notsup Unsupported engine for electron-rebuild@3.2.3: wanted: {“node”:“>=12.13.0”} (current: {“node”:“10.24.0”,“npm”:“6.13.6”})
npm WARN notsup Not compatible with your version of node/npm: electron-rebuild@3.2.3
npm WARN notsup Unsupported engine for @malept/cross-spawn-promise@2.0.0: wanted: {“node”:“>= 12.13.0”} (current: {“node”:“10.24.0”,“npm”:“6.13.6”})
npm WARN notsup Not compatible with your version of node/npm: @malept/cross-spawn-promise@2.0.0
npm WARN notsup Unsupported engine for fs-extra@10.0.0: wanted: {“node”:“>=12”} (current: {“node”:“10.24.0”,“npm”:“6.13.6”})
npm WARN notsup Not compatible with your version of node/npm: fs-extra@10.0.0
npm WARN notsup Unsupported engine for yargs@17.2.1: wanted: {“node”:“>=12”} (current: {“node”:“10.24.0”,“npm”:“6.13.6”})
npm WARN notsup Not compatible with your version of node/npm: yargs@17.2.1

npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! @bugsounet/pir@1.0.6 postinstall: electron-rebuild
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the @bugsounet/pir@1.0.6 postinstall script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

[DJBOOB66]

@philmavedzenge said in MMM-NewPIR v3:

npm WARN notsup Unsupported engine for yargs@17.2.1: wanted: {“node”:“>=12”} (current: {“node”:“10.24.0”,“npm”:“6.13.6”})

You need to update npm and node

[philmavedzenge]

@djboob66 said in MMM-NewPIR v3:

@philmavedzenge said in MMM-NewPIR v3:

npm WARN notsup Unsupported engine for yargs@17.2.1: wanted: {“node”:“>=12”} (current: {“node”:“10.24.0”,“npm”:“6.13.6”})

You need to update npm and node

Thanks for the response. How do I do that? Which folder should I update it in?

[Fozi]

@philmavedzenge in your home directory execute following two commands:

sudo npm  install -g n
sudo n latest

This installs the latest node version

Edit: added sudo

[DJBOOB66]

Ok you need to find a working node and npm for all module if you have Bugs Google Aisstant v3 then it is best to check the module first GA v3 needs,
Node: v12.x.x upto v14.x.x
npm: = v6.14.15 (some trouble with v7.x)
I suggest trying.
Do in this order.

sudo npm cache clean -f
sudo npm install -g n
sudo n 14.0

now check npm with npm -v
If 6.14.15 do nothing more but over 7.x use below

sudo npm install -g npm@6.14.15

[Fozi]

@djboob66 you’re right…I forgot that there might be potential issues with the latest version. Thanks for the correction!

@philmavedzenge : Generally I’d recommend to use @sdetweil update script when updating to a new MM version. (see here) As you already updated to 2.17.1, use this command with force at he end instead of apply

bash -c "$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/upgrade-script.sh)" force

Sam‘s script checks, if the correct node and npm versions are installed and updates them accorgingly if necessary.

[philmavedzenge]

@djboob66 said in MMM-NewPIR v3:

sudo npm install -g npm@6.14.15

thank you guys very much, this worked for me

[philmavedzenge]

@fozi i had used that script to update, i don’t know why it didn’t update the other components. Thanks a lot for your help

[sdetweil]

@philmavedzenge it doesn’t upgrade mode/npm

install checks, upgrade does not (usually didn’t need to)

[philmavedzenge]

@sdetweil said in MMM-NewPIR v3:

@philmavedzenge it doesn’t upgrade mode/npm

install checks, upgrade does not (usually didn’t need to)

I see now. Thanks a lot for the help

[uros76]

Hi. Does anyone know of a way to format “LastPresence” output? Default is a full date and time in one line however I would like to change the format of the output. Don’t see any config option to format it…

[cowboysdude]

@uros76 said in MMM-NewPIR v3:

Hi. Does anyone know of a way to format “LastPresence” output? Default is a full date and time in one line however I would like to change the format of the output. Don’t see any config option to format it…

How would you like it formatted?

[uros76]

@cowboysdude ideally I would like to specify the date/time format, like on a stock MM Clock module.