Read the statement by Michael Teeuw here.
Facial Recognition - customize your mirror for every user!
-
-
Sorry for spaming,
but I tried to refresh everything. So I installed the Rasbian new, the Magic Mirror, the Facial Recognition and the Tools. It worked… ONCE. After rebooting the system I have the same error as bevor:
It load training data and select the PiCam and then it doesn’t go on. No error-message.
Any idea which component was active when I reinstalled everything and isn’t active after rebooting?
The camera is enabled. -
I have the same issue. Training went fine. I got everything working but then after a reboot it seems to load the module but then nothing. It doesn’t seem to want to do anything. No errors just no facial recognition.
-
So I figured out my own problem. Seems like it doesn’t like it when I changed the language file. Restored the old one and everything works as it should. Also, I find raising the threshold to 250 for the LBPH Algorithm helps a lot to get more accurate results. The confidence seems to hover around 49-52 for me but I couldn’t get any results with 50, constantly thought I was “stranger”. Thanks for all the hard work on this module. It’s really fun to play with!
-
I got this module working after a bit of trial and error, and it’s awesome. I only have 1 issue so far. When I’m recognized, all of the modules drop by about 30 pixels. I’m not a programmer by any stretch of the imagination, but have no issues looking around at code trying to figure out what it does. I used Firebug to see what was going, and from what I can see, the one of the div’s updates from style=“display: none;” to style=“display: block;”. The part that’s really confusing me is that it only does this when it recognizes me. When it recognizes a stranger, none of the modules shift. I can provide anything requested, but I wasn’t sure if anyone else was experiencing this issue.
-
@Prestitivo It means you’ve configured that module to be displayed when you are recognized, and hidden when you are not. Take a look at your config to see if you can pinpoint which module is making this happen.
-
Ah yes, thank you. It was the “updatenotification” module in the top bar. I took myself off of that, and now it works as expected. Now that I think about it, that makes sense.
Still have a lot of tinkering to do, but this solved the annoying issue I caused.
Thank you kindly for the help.
-
Hi… will there be any possibility to use Facial Recognition along with motion detection for turning on/off the Display ?
Regards,
Wolfgang -
Hello, have some Proplem with this Modul:
0|mm | > magicmirror@2.5.0 start /home/pi/MagicMirror 0|mm | > sh run-start.sh 0|mm | Starting MagicMirror: v2.5.0 0|mm | Loading config ... 0|mm | Loading module helpers ... 0|mm | No helper found for module: alert. 0|mm | Initializing new module helper ... 0|mm | Module helper loaded: updatenotification 0|mm | No helper found for module: clock. 0|mm | Initializing new module helper ... 0|mm | Module helper loaded: MMM-Facial-Recognition 0|mm | Initializing new module helper ... 0|mm | Module helper loaded: calendar 0|mm | Initializing new module helper ... 0|mm | Module helper loaded: MMM-EARTH 0|mm | No helper found for module: currentweather. 0|mm | No helper found for module: weatherforecast. 0|mm | Initializing new module helper ... 0|mm | Check MagicMirror version for node helper 'MMM-LocalTemperature' - Minimum version: 2.2.1 - Current version: 2.5.0 0|mm | Version is ok! 0|mm | Module helper loaded: MMM-LocalTemperature 0|mm | Initializing new module helper ... 0|mm | Module helper loaded: mmm-systemtemperature 0|mm | Initializing new module helper ... 0|mm | Module helper loaded: newsfeed 0|mm | All module helpers loaded. 0|mm | Starting server on port 8080 ... 0|mm | Server started ... 0|mm | Connecting socket for: updatenotification 0|mm | Connecting socket for: MMM-Facial-Recognition 0|mm | Starting module helper: MMM-Facial-Recognition 0|mm | Connecting socket for: calendar 0|mm | Starting node helper for: calendar 0|mm | Connecting socket for: MMM-EARTH 0|mm | Starting module: MMM-EARTH 0|mm | Connecting socket for: MMM-LocalTemperature 0|mm | MMM-LocalTemperature: module loaded! Path: /home/pi/MagicMirror/modules/MMM-LocalTemperature 0|mm | Connecting socket for: mmm-systemtemperature 0|mm | Starting node helper: mmm-systemtemperature 0|mm | Connecting socket for: newsfeed 0|mm | Starting module: newsfeed 0|mm | Sockets connected & modules started ... 0|mm | (node:11742) [DEP0025] DeprecationWarning: sys is deprecated. Use util instead. 0|mm | Launching application. 0|mm | libGL error: MESA-LOADER: failed to retrieve device information 0|mm | MESA-LOADER: failed to retrieve device information 0|mm | MESA-LOADER: failed to retrieve device information 0|mm | Create new calendar fetcher for url: http://.... - Interval: 300000 0|mm | Whoops! There was an uncaught exception... 0|mm | TypeError: PythonShell is not a constructor 0|mm | at Class.python_start (/home/pi/MagicMirror/modules/MMM-Facial-Recognition/node_helper.js:11:21) 0|mm | at Class.socketNotificationReceived (/home/pi/MagicMirror/modules/MMM-Facial-Recognition/node_helper.js:40:14) 0|mm | at Socket.<anonymous> (/home/pi/MagicMirror/modules/node_modules/node_helper/index.js:113:11) 0|mm | at emitTwo (events.js:126:13) 0|mm | at Socket.emit (events.js:214:7) 0|mm | at /home/pi/MagicMirror/node_modules/socket.io/lib/socket.js:513:12 0|mm | at _combinedTickCallback (internal/process/next_tick.js:131:7) 0|mm | at process._tickCallback (internal/process/next_tick.js:180:9) 0|mm | MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection? 0|mm | If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues 0|mm | Create new calendar fetcher for url: http://i.cal.to/.....ics - Interval: 300000 0|mm | https://epic.gsfc.nasa.gov/api/natural 0|mm | MMM-LocalTemperature: Socket Notification Received: "INIT". 0|mm | MMM-LocalTemperature: Socket Notification Received: "GET_DATA". 0|mm | Create new news fetcher for url: https://www.ofc.de/rss-feed.xml - Interval: 300000 0|mm | Create new news fetcher for url: http://www.tagesschau.de/xml/rss2 - Interval: 300000TypeError: PythonShell is not a constructor
anyone an idea?
-
@eviltrooper you can also install an older version of python-shell (0.4.0 ) and it works without modifying the node_helper.js file! You can install this specific version of python-shell by this command:
npm install python-shell@0.4.0
