2 problems with MMM-MyCommute module

strawberry 3.141

@Bob I can spot multiple missing quotes

Bob

@strawberry-3-141 Where are there quotes missing ? I could only see a couple (which I’ve corrected in my first post). I edited the code to remove identifying info, so it should be ok now. Normally when there is a code error due to syntax (such as quotes), MM won’t even run.

In this instance, I simply get a line error for the specific mode of transport.

Bob

This is what I get using the code above.

0_1504002124877_MyCommute error.JPG

strawberry 3.141

@Bob two times you have destination: 'Work 2 Postal Code, instead of destination: 'Work 2 Postal Code',

yawns

{
	module: 'MMM-MyCommute',
	header: "Work Commute",
	position: 'bottom_right',
	config: {
		api_key: 'xxxxxxxxxxxxxxxxxxxxxxxxxxx',
		origin: 'Home Postal Code',
		showSummary: true,
		startTime: '00:00',
		endTime: '23:59',
		colorCodeTravelTime: true,
		moderateTimeThreshold: 1.01,
		poorTimeThreshold: 1.05,
		destinations: [
			{
			destination: 'Work  1 Postal Code', // Farther office, by car, alternatives on
			label: 'Office 1',
			color: '#1E90FF', //Blue
			alternatives: true,
			},
			{
			destination: 'Work  2 Postal Code', // Closer office, walking, alternatives off
			label: 'Office 2 - Walking',
			mode: 'walking',
			color: '#98FB98', // Green
			alternatives: false,
			},
			{
			destination: 'Work 2 Postal Code',
			label: 'Office 2 - Train',
			mode: 'transit',
			transitMode: 'train',
			showNextVehicleDeparture: true,
			color: '#ffff00', //Yellow
			alternatives: false,
			},
			{
			destination: 'Work 2 Postal Code',
			label: 'Office 2 - Tram',
			mode: 'transit',
			transitMode: 'tram',
			showNextVehicleDeparture: true,
			color: '#ffff00', //Yellow
			alternatives: false,
			},
			{
			destination: 'Work 2 Postal Code',
			label: 'Office 2 - Bus',
			mode: 'transit',
			transitMode: 'bus',
			showNextVehicleDeparture: true,
			color: '#ffff00', //Yellow
			alternatives: false,
			}
		]
	},
},

Bob

@strawberry-3-141 I saw that, and fixed it (just not in my post)

@yawns I cut and pasted your code (adjusted the API key and the postal codes), and still get the same error (as per previous screenshot)

Bob

I’m guessing no-one has any other ideas ? I wondered if there was a conflict with any other modules, so I’ve done a full rebuild of the RPi, stripped the config to just this module, and it still doesn’t work properly.

Ho hum

j.e.f.f

@Bob I’m the author of this module. Can you send me a private message? I’ll see if I can figure out what’s going on.

knubbl

I got the same problem. So im really interested what is the problem and how to fix.

Thanks

j.e.f.f

@Bob @knubbl The issue is that the config has api_key: "...". It should be apikey: "..." (no underscore)