Read the statement by Michael Teeuw here.
After update to Mirror to 2.1.3 - no working Whitlist
-
hi!
maybe wrong config.js ??
here is my working code:
var config =
{
address: “0.0.0.0”,
electronOptions: {}, ipWhitelist: [ "10.0.0.1/24", "::ffff:10.0.0.1/120", "127.0.0.1", "::ffff:127.0.0.1", "::1" ],
and so on…
greets
shotput2017 -
is this an acceptable configuration ?
address:"0.0.0.0",
or is it better specifying the actual server ip here ?
-
I put my config like this:
{ port: 1103, address: '0.0.0.0', electronOptions: { }, ipWhitelist: [ "127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.113.60", "::ffff:192.168.113.22", "::ffff:192.168.113.97", "::ffff:192.168.113.29", "::ffff:192.168.113.103", "::ffff:192.168.113.66" ],
The Remote-Control says “This device is not allowed to acces your mirror”. The IP-Adresses are correct.
-
i have the same problem
i already set “adress” to :“0.0.0.0” and edited the ipwhitelist to
ipWhitelist: [“::fff:0.0.0.0/1”, “::fff:0.8.0.0/1”, “::fff:128.0.0.0/2”, “::fff:192.0.0.0/3”, “::fff:224.0.0.0/4”, “127.0.0.1”, “::ffff:127.0.0.1”, “::1”]
but still i get no access.
Btw. its a raspberry pi zero with serveronly
-
@Niggich For my setup (raspberry pi 2) something changed after the update, but when I changed my IP addresses to the IPv4 notation (remove
::ffff:
from your addresses) it worked again. Which format do the blocked addresses have in your logs (see below)?@FreddeHamm Are you sure those CIDR numbers are correct?
When in doubt, check the output or logs (
pm2 logs MagicMirror
orpm2 logs mm
if you used the old auto starting guide), there should be a line telling you which IP address was received. Also there are a calculators which transform your IP range to the CIDR notation. -
Same here, tried addres 0.0.0.0 and various things in the Whitelist.
A ping gives “destination unreachable”… SSH also doesn’t work.
Can someone please suggest ways to troubleshoot? -
@Nick said in After update to Mirror to 2.1.3 - no working Whitlist:
tried addres 0.0.0.0 and various things in the Whitelist.
Have you tried OUTSIDE your Whitelist, as such:
var config = { port: 8080, address: "0.0.0.0", ipWhitelist: [], // Set [] to allow all IP addresses.
-
Thx @Mykle1, indeed I have. See the beginning of my (working) config file below.
What is suspicious to me is that not even a Ping works to that IP, even though I’ve checked it by printing it on the screen of the MM and in the router.
Also, before my Whitelist was a long list of IPs, now I’ve tried the [] option but to no avail…/*************** AUTO GENERATED BY REMOTE CONTROL MODULE ***************/ var config = { address: "0.0.0.0", electronOptions: { }, ipWhitelist: [ ], modules: [ { module: "alert", config: { } }, { module: "updatenotification", position: "top_bar", config: { } }, { module: "MMM-Remote-Control", position: "middle_center", config: { } },
-
@Nick said in After update to Mirror to 2.1.3 - no working Whitlist:
not even a Ping works to that IP
Pinging the mirror’s IP fails? Pinging other devices on your network is successful?
-
Yes, including my personal wiki on another Raspberry Pi, all with 2-5ms