After update to Mirror to 2.1.3 - no working Whitlist

[fox]

@Sandy2503 ok nice to know. My problem, that - as i wrote - that with the “developer checkout” from github my MagicMirror is now broken :(

[Hein-Jan]

Adding

address: “0.0.0.0”,

to the config.js also did the trick for me.

Thanks!

[knubbl]

As soon i put “0.0.0.0” to my config (see bellow with empty adress"") i get a black screen on start MM

var config = {
port: 8080,
address:“”,
language: “de”,
timeFormat: 24,
units: “metric”,

Any ideas?

[shotput2017]

hi!
maybe wrong config.js ??
here is my working code:
var config =
{
address: “0.0.0.0”,
electronOptions: {

},
ipWhitelist: [
	"10.0.0.1/24",
	"::ffff:10.0.0.1/120",
	"127.0.0.1",
	"::ffff:127.0.0.1",
	"::1"
],

and so on…

greets
shotput2017

[cben0ist]

is this an acceptable configuration ?

address:"0.0.0.0",

or is it better specifying the actual server ip here ?

[Niggich]

I put my config like this:

{
	port: 1103,
	address: '0.0.0.0',
	electronOptions: {
		
	},
	ipWhitelist: [
		"127.0.0.1",
		"::ffff:127.0.0.1",
		"::1",
		"::ffff:192.168.113.60",
		"::ffff:192.168.113.22",
		"::ffff:192.168.113.97",
		"::ffff:192.168.113.29",
		"::ffff:192.168.113.103",
		"::ffff:192.168.113.66"
	],

The Remote-Control says “This device is not allowed to acces your mirror”. The IP-Adresses are correct.

[FreddeHamm]

i have the same problem

i already set “adress” to :“0.0.0.0” and edited the ipwhitelist to

ipWhitelist: [“::fff:0.0.0.0/1”, “::fff:0.8.0.0/1”, “::fff:128.0.0.0/2”, “::fff:192.0.0.0/3”, “::fff:224.0.0.0/4”, “127.0.0.1”, “::ffff:127.0.0.1”, “::1”]

but still i get no access.

Btw. its a raspberry pi zero with serveronly

[Jopyth]

@Niggich For my setup (raspberry pi 2) something changed after the update, but when I changed my IP addresses to the IPv4 notation (remove ::ffff: from your addresses) it worked again. Which format do the blocked addresses have in your logs (see below)?

@FreddeHamm Are you sure those CIDR numbers are correct?

When in doubt, check the output or logs (pm2 logs MagicMirror or pm2 logs mm if you used the old auto starting guide), there should be a line telling you which IP address was received. Also there are a calculators which transform your IP range to the CIDR notation.

[Nick]

Same here, tried addres 0.0.0.0 and various things in the Whitelist.
A ping gives “destination unreachable”… SSH also doesn’t work.
Can someone please suggest ways to troubleshoot?

[Mykle1]

@Nick said in After update to Mirror to 2.1.3 - no working Whitlist:

tried addres 0.0.0.0 and various things in the Whitelist.

Have you tried OUTSIDE your Whitelist, as such:

var config = {
	port: 8080,
        address: "0.0.0.0",
	ipWhitelist: [], // Set [] to allow all IP addresses.