MMM-xiaomi - Temperature and Humidity from your smarthome

blinky1989dk

@yawns is dot work. so i had try to send config fil to you on pb

yawns

/* Magic Mirror Config Sample

By Michael Teeuw http://michaelteeuw.nl
MIT Licensed.
*/
var config = {
zoom: 0.6,
port: 8080,
ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses.

language: "da",
timeFormat: 24,
units: "metric",

modules: [
	{
		module: "alert",
	},
	{
		module: "clock",
		position: "top_left"
	},
	{
		module: 'MMM-WunderGround',
		position: 'top_right',
		config: {
			apikey: 'xxxxxxxxxxxxxxxxxxxxxx', // private; don't share!
			pws: 'pws:IVEJLE2', //culemborg
			hourly: '1',
			fctext: '1',
			fcdaycount: "5",
			fcdaystart: "0",
			hourlyinterval: "3",
			hourlycount: "2",
			alerttime: 10000,
			alerttruncatestring: "english:",
			roundTmpDecs: 1,
			UseCardinals: 0,
			layout: "vertical",
			iconset: "novaco",
			sysstat: 0
		}
	},
	{
		module: "MMM-xiaomi",
		position: "bottom_left",
		header: "Temperature / Humidity", // This is optional
		config: {
			gatewayIP: "192.168.10.170",
			gatewayToken: "xxxxxxxxxxxxxxxxxxx",
			showwindow: true,
			showVentilation: false,
			minTemperature: true,
			maxHumidity: true,
			showlights: true,
			rooms: [
			{ name: "test", sortOrder: 30, devices: ["158d0001b911b9"] },
			],
		}
	},
	],
	};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

Please try again. I don’t know which text editor you used, but it is very important to only use these around strings:

"
’

Do not use

‘
“
”

shgmongohh

@mirko3000
Yes, i solved the problem with the token.

to my css:
I add

.xm-xiaomi .small {
  font-size: 24px;
}

to get a bigger fonts.

I try to change the default colours e.g.

.xm-legend-temp {
  position: absolute;
  height: 100%;
  width: 3px;
  background-color: #FF1493;
  left: 9%;
  z-index: 0;

And I want to have bigger figueres for temperature and humidity

.xm-room-temp-humid {
   margin: 10px;
   
}

blinky1989dk

@yawns okay THX. I Will try

blinky1989dk

This post is deleted!

joseska

Hi… We have an error with door sensor. Not show icons on MM. I think that the config is ok

{
			module: 'MMM-xiaomi',
			position: 'bottom_left',
			header: 'Temperatura / Humedad',
			config: {
				gatewayIP: '192.168.1.103',
				gatewayToken: 'xxxxxxxxxxxx872e8bc25e415a7005a2',
				showWindow: true,
				showVentilation: true,
				showLights: false,
				audioNotifications: true,
				rooms: [
					{ name: 'Salon', sortOrder: 10, devices: ['158d0001f531bf', '158d00020258f4'] }
				]
			}
		},

any idea???
Thanks…

mirko3000

Hmm your config seems to be fine, make sure the IDs are ok, else it should work. Be aware that the icon only shows open window/doors, so if the door is closed you won’t see an icon.
I suppose the temperature sensor is working fine?

joseska

@mirko3000 Now Work… I don´t know why…
simply copy again the id (the same) and change showVentilation: false (don´t have outdoor sensor) and work…

sorry and thanks…

Smotx

HI,

Anyone know why MMM Xiaomi need aplay ?

Error: Cannot find module 'node-aplay'
    at Module._resolveFilename (module.js:543:15)
    at Function.Module._resolveFilename (/home/pi/MagicMirror/node_modules/electron/dist/resources/electron.asar/common/reset-search-paths.js:35:12)
    at Function.Module._load (module.js:473:25)
    at Module.require (module.js:586:17)
    at require (internal/module.js:11:18)
    at Object.<anonymous> (/home/pi/MagicMirror/modules/MMM-xiaomi/node_helper.js:11:20)
    at Object.<anonymous> (/home/pi/MagicMirror/modules/MMM-xiaomi/node_helper.js:140:3)
    at Module._compile (module.js:642:30)
    at Object.Module._extensions..js (module.js:653:10)
    at Module.load (module.js:561:32)
Whoops! There was an uncaught exception...

Thanks

Smotx

@mirko3000 said in MMM-xiaomi - Temperature and Humidity from your smarthome:

I just recieved my order of another 6 window sensors yesterday :) But I really think they will shut this down soon, guess they (gearbest) are not paying any taxes at all…

Working on the new version, this is what I have in mind:

How to have this screen ?

Smotx

This post is deleted!

Smotx

it seems that these window sensors are not compatible.

Xiaomi Aqara Window Door Sensor

I added them to the config module and no return on MM.

When i launch

miio discover

it found

Device ID: 158d0001ab1f9c
Model info: lumi.magnet.aq2

but when i launch npm start, MMM-xiaomi say

Found device with ID 158d0001ab1f9c of type generic

and no

Found device with ID 158d0001ab1f9c of type magnet

Smotx

Thanks to owner of module : @mirko3000 for update to see this sensor !

Now that’s work

VagelisAn

Dear @mirko3000 i have follow your instraction and i install the MMM-Xiaomi, i install and the miio to get the access token but the scan of miio is not find the getaway accesstoken

pi@raspberrypi:~ $ miio discover
 INFO  Discovering devices. Press Ctrl+C to stop.

Device ID: 631XXXXX
Model info: Unknown
Address: XXX.XXX.X.XXX
Token: ???
Support: Unknown

I use the MI application and get the ip and accessToken and the id from temperature sensor.
The name is lumi.158xxxxxxxxxxx
this is the code of config

module: 'MMM-xiaomi',
		position: 'top_right',
		header: 'Temperature / Humidity',  // This is optional
		config: {
			config: {
			gatewayIP: 'IP getaway from MI home',
			gatewayToken: 'accese getaway from MI home',
			showWindow: true,
			showVentilation: true,
			showLights: false,
			audioNotifications: true,
			rooms:  [
				{
					name: 'Bedroom-Mi Temp',
					sortOrder: 10,
					devices : ['lumi.158xxxxxxxxxxx']
				},
					]
					}
		}

I execute and i have this error in terminal andthe xiaomi modules say connecting to xiaommi getaway.

{ Error: Call to device timed out
    at retry (/home/pi/MagicMirror/modules/MMM-xiaomi/node_modules/miio/lib/devi             ce.js:225:18)
    at _ensureToken.catch.err (/home/pi/MagicMirror/modules/MMM-xiaomi/node_modu             les/miio/lib/device.js:238:8)
    at <anonymous> code: 'timeout' }

Sorry if my English is bad

gh057

Has anyone tried to get the module to work with a Gateway AND a Yeelight bed lamp ??

I mean i have the module working with my gateway (manually added the token, and then the sensors appeard in miio discovery) but i havent managed to get it to work with the yeelight lamp (that also acts as a bluetooth gateway for my other sensors).

When i reseted the lamp, and connected to its wifi, i discovered it with miio and extracted the token, but later when i registered the lamp with the mi app, and connected my pi to my wifi, while the lamp is pingable by the pi, now miio doesn’t discover it!!

But, besides that, even if i manage to discover the lamp again with miio, i’m not aware if its even possible to add a second gateway to the module.

Does anyone know??

gauka12345

HI there i have got same problem the gateway was turned off
then i have tried to reconnect all the temperature sensors and tokens shows with ??? question marks… can some one help please!

gauka12345

pi@raspberrypi:~/miio $ miio discover
INFO Discovering devices. Press Ctrl+C to stop.

Device ID: 72558327
Model info: lumi.gateway.v3
Address: 192.168.0.9
Token: ???
Support: At least generic

Smotx

hi,

Same problem here too

I have changed my router, so i have change wifi of Xiaomi hub

On magicmirror config i have set new ip 192.168.2.xxx (before 192.168.1.xxx).

But always nothing on MagicMirror after reboot.

perhaps token has changed with new router… So, on the rasp i launch command ```
miio discover


` $ sudo miio discover
 INFO  Discovering devices. Press Ctrl+C to stop.

Device ID: 567xxxx54
Model info: Unknown
Address: 192.168.2.xxx
Token: ???
Support: Unknown
`

Anybody know why ? :(.

gauka12345

Hi
You can get token by installing older version of mi home app on you mobile
https://www.apkmirror.com/apk/xiaomi-inc/mihome/mihome-5-0-19-release/mihome-5-0-19-android-apk-download/
Then you will need to follow this tutorial to obtain the token
https://www.youtube.com/watch?v=Q4QV8tMI8H4
however so far i have swap the tokens but with no luck. i think the device need to be discovered by MIiio.

Smotx

@gauka12345

I gave found new token on Mi home app android, it worked a few days, and then again it does not work anymore, it tells me ‘time out’ and in mioo discover there is nothing at all

{ Error: Call to device timed out
at retry (/home/pi/MagicMirror/modules/MMM-xiaomi/node_modules/miio/lib/device.js:225:18)
at _ensureToken.catch.err (/home/pi/MagicMirror/modules/MMM-xiaomi/node_modules/miio/lib/device.js:238:8)
at code: ‘timeout’