MMM-xiaomi - Temperature and Humidity from your smarthome

mirko3000

Sorry, forgot about the link:
https://github.com/mirko3000/MMM-xiaomi

@barnosch, @cxlwill: Did you check the logs? Anything showing up there?

mirko3000

Also it only supports xiaomi temperature sensors, so if you don’t have any registered on your gateway it will not show anything (Keeping in “Connecting to gateway…” mode).

cowboysdude

@mirko3000 Thank you for this!! Exactly what I have been looking for… this is truly awesome!

I would like about 9 of these sensors… do I also need the gateway as well?

barnosch

@cowboysdude : As i read, the Gateway is mandatory.
But as always Xiaomi is really cheap. GW is about 25$ i guess.

I ordered some temp sensors. Can’t wait to test the stuff.

cxlwill

@mirko3000 Well, I have temp&hum sensor and it works well with Home Assistant and Homebridge. So I think the API itself is OK. I will check the log. Nice plugin anyway. Maybe we can extend it to more Xiaomi devices.

cowboysdude

@barnosch said in MMM-xiaomi - Temperature and Humidity from your smarthome:

@cowboysdude : As i read, the Gateway is mandatory.
But as always Xiaomi is really cheap. GW is about 25$ i guess.

I ordered some temp sensors. Can’t wait to test the stuff.

I saw the gateway was inexpensive so if I can find a US plug adapter for this I will be ordering the gateway and about 9 of the temp sensors :)

Albert2002

How to figure out the id of the sensor?

mirko3000

Well the IDs show up in your magic mirror - the problem is to identify which ID belongs to which sensor. I guessed them by checking the temperature, still I agree that this is not very convenient so far. Looking out for a better solution…

Albert2002

Thank you for your replay!

When I do so I get a “Connecting to XIAOMI gatway…”
Connecting to XIAOMI gatway..

As far as I understand "ENETUNREACH " means Network unreachable. I can successfully ping the Gatway at 192.168.2.107 via VNC & LX Terminal.
Do I have to set up something on my Gateway first?
Any idea what to do?

This is what my error log says:

ERROR! Could not find main module js file for RepositoryForRC
ERROR! Could not find main module js file for async
{ Error: send ENETUNREACH 192.168.2.107:54321
    at Object.exports._errnoException (util.js:1050:11)
    at exports._exceptionWithHostPort (util.js:1073:20)
    at SendWrap.afterSend [as oncomplete] (dgram.js:402:11)
  code: 'ENETUNREACH',
  errno: 'ENETUNREACH',
  syscall: 'send',
  address: '192.168.2.107',
  port: 54321 }

My mm out:

Starting MagicMirror: v2.1.3
Loading config ...
Loading module helpers ...
No helper found for module: alert.
No helper found for module: clock.
Initializing new module helper ...
Module helper loaded: MMM-Remote-Control
Initializing new module helper ...
Module helper loaded: MMM-xiaomi
All module helpers loaded.
Starting server on port 8080 ... 
Server started ...
Connecting socket for: MMM-Remote-Control
Starting node helper for: MMM-Remote-Control
Connecting socket for: MMM-xiaomi
Starting xiaomi helper
Sockets connected & modules started ...
Launching application.
Triggering Xiaomi Gateway upate

Albert2002

I’ve made a completely new Raspian & MM installation. No other modules installed. the default modules disabled in the config.js.

I Still get no connection. Im running the Home Gatewy V3 in Dev mode. Do I have to change any settings on my router or somewhere else?

Right now I get different error messages. Maybe it helps. I would love to see this module running!

mm-out:

> magicmirror@2.1.3 start /home/pi/MagicMirror
> sh run-start.sh

Starting MagicMirror: v2.1.3
Loading config ...
Loading module helpers ...
Initializing new module helper ...
Module helper loaded: MMM-xiaomi
All module helpers loaded.
Starting server on port 8080 ... 
You're using a full whitelist configuration to allow for all IPs
Server started ...
Connecting socket for: MMM-xiaomi
Starting xiaomi helper
Sockets connected & modules started ...
Whoops! There was an uncaught exception...
MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues
Launching application.

MagicMirror error log:

Error: Token could not be auto-discovered
    at Device._tokenResolve (/home/pi/MagicMirror/modules/MMM-xiaomi/node_modules/miio/lib/device.js:141:13)
    at Device._onMessage (/home/pi/MagicMirror/modules/MMM-xiaomi/node_modules/miio/lib/device.js:80:9)
    at emitTwo (events.js:106:13)
    at Socket.emit (events.js:194:7)
    at UDP.onMessage [as onmessage] (dgram.js:545:8)

MagicMirror out:

 magicmirror@2.1.3 start /home/pi/MagicMirror
> sh run-start.sh

Starting MagicMirror: v2.1.3
Loading config ...
Loading module helpers ...
Initializing new module helper ...
Module helper loaded: MMM-xiaomi
All module helpers loaded.
Starting server on port 8080 ... 
You're using a full whitelist configuration to allow for all IPs
Server started ...
Connecting socket for: MMM-xiaomi
Starting xiaomi helper
Sockets connected & modules started ...
Launching application.
Triggering Xiaomi Gateway upate
Triggering Xiaomi Gateway upate

mm error log:

{ Error: listen EADDRINUSE 127.0.0.1:8080
    at Object.exports._errnoException (util.js:1050:11)
    at exports._exceptionWithHostPort (util.js:1073:20)
    at Server.setupListenHandle [as _listen2] (net.js:1263:14)
    at listenInCluster (net.js:1304:12)
    at doListen (net.js:1428:7)
    at GetAddrInfoReqWrap.asyncCallback [as callback] (dns.js:62:16)
    at GetAddrInfoReqWrap.onlookup [as oncomplete] (dns.js:78:10)
  code: 'EADDRINUSE',
  errno: 'EADDRINUSE',
  syscall: 'listen',
  address: '127.0.0.1',
  port: 8080 }