MMM-NetworkScanner

Mykle1

@slametps Yes, at first the same thing happened to me.

This might seem obvious but did you change your config.js to ipAddress instead of macAddress?

slametps

@slametps Yes, at first the same thing happened to me.

This might seem obvious but did you change your config.js to ipAddress instead of macAddress?

I add new entries with ipAddress, but did not recognized. All displayed MAC (with showUnknown: true) already defined as entries with macAddress, but it said as Unknown devices.

ianperrin

Hi all

The updates last week seem to have introduced a few issues - sorry folks!

I’ve quashed one bug with MAC Address scans which you can git pull from the repo to see if that helps, but there still appear to be a few others which need resolving.

I am looking at it but please bear with me ;)

Mykle1

@ianperrin said in MMM-NetworkScanner:

I am looking at it but please bear with me

Shhhhh! Quiet! Genius at work!

I am completely serious. I think you are a brilliant young man.

Much success to you. :thumbsup_tone1:

pugsly

@ianperrin
Yup good work on getting the updates…

MAC is working again, but the entries are all duplicated. ;)

Speedy-one

@pugsly same here -.-

slametps

@Speedy-one said in MMM-NetworkScanner:

@pugsly same here -.-

I freshly install rather than update the module, and working flawlessly.

pugsly

@slametps Deleted the module and did a fresh install, still showing duplicate entries.

slametps

@pugsly said in MMM-NetworkScanner:

@slametps Deleted the module and did a fresh install, still showing duplicate entries.

Lucky me. Btw, had you installed v0.0.1?

pugsly

@slametps Yes i did, and that one worked fine using MAC. I have actually reverted back to that one, so I don’t get the ‘last seen’ message anymore.

bluedoors

Any chance of an enhancement to scan outside the local network mask? i’m not sure if that is a config option in arp-scan that isn’t surfaced?

I have my MM on ethernet in one subnet, but want to scan for MAC addresses in another subnet (my Wifi). or at least a broader CIDR range

bminer1

Does anyone have issues with the “occupied” and “vacant” part working? I tried to set it up and test it but i have had no luck. I want the mirror to turn off when i leave and turn back on when i return. I love this idea but need a little help configuring it to work.

My config is below:

{
	        module: 'MMM-NetworkScanner',
	        position: 'top_right',
		header: "Network Scanner",
	        config: {
	            devices: [
	                    { macAddress: "lower case", name: "B Phone", icon: "mobile"},
	                    { macAddress: "lower case", name: "B Work Phone", icon: "mobile"},
			    { macAddress: "lower case", name: "B Work Laptop", icon: "laptop"},
	                     ],
	            showUnknown: false,
	            showOffline: true,
	            keepAlive: 300,
	            updateInterval: 10,
		    showLastSeen: true,
	            residents: "B Phone",
	            occupiedCMD: {notification: 'REMOTE_ACTION', payload: {action: 'MONITORON'}},
	            vacantCMD  : {notification: 'REMOTE_ACTION', payload: {action: 'MONITOROFF'}},
	        		}        
    		},

bminer1

I am also getting duplicates as well. Any help on this?

alt text

derek7467

@bluedoors modify the js file to scan your subnets? If your subnets were 192.168.1.0/24 and 192.168.2.0/24 you could scan 192.168.1.0/23 to scan both subnets, right? Same gateway for both subnets?

binderth

@bminer1 said in MMM-NetworkScanner:

Does anyone have issues with the “occupied” and “vacant” part working?

Ah, nice: Is this doing, what I suspect it’s doing? ;)
occupiedCMD: Notification to be sent when a resident returnes home e.g. {notification: ‘REMOTE_ACTION’, payload: {action: ‘MONITORON’}} would turn the mirror on when a resedent returnes home.

What does “returnes home” mean: Changing from “offline” to “online”: trigger the action (vice versa for vacantCMD). It does only trigger once? Would it be possible to call an external URL with this? - and then: does it trigger if any resident leaves or can I specify which resident leaves?

bminer1

@binderth I tried testing it by turning my WiFi off on my phone, waiting a few minutes to see if it turns off and it doesn’t turn off. I even physically left the house for dinner and came home to it still on. I love the feature and would do almost anything to get it to work. I’m new to all this stuff so i don’t have the skill to debug on my own.

binderth

@bminer1 yes, this is nice! would be killer, if it were to be configured per device! ;) it seems from the way in the config, it was intended to fire regardless of which device leaves or comes up again…

bminer1

@binderth When i read through the Read ME, it says that the Residence determines when to turn on and off. I want this to work for me so then i can put my wifes phone in there as a resident and that way, when both of us leave, it shuts off. when one of us is home, it stays on.

binderth

@bminer1 ah. ok, I get it (didn’t have “residents” in my config either). So, this one is realy “every resident is offline”: i do something. “At least one resident is online again”: i do something. So this would then be a generic presence detection.

Would be cool, if it could also be bound to specific residents. So I can have Actions regarding on them also.

bminer1

@binderth I think you are on a right track. We just need to debug the “simple” task of turning on and off and then the fun can begin with other stuff.