MMM-voice

daveyg_71

I tried the command a record -I

it returned this:
pi@magicmirror:~ $ arecord -l
**** List of CAPTURE Hardware Devices ****
pi@magicmirror:~ $

Its just not seeing it. I’m guessing that the mic broke.

Nonamexp

@strawberry-3.141 I’ve conducted the command “sudo bash dependencies.sh”

I’ve tried the command ‘sudo chmod 777 /opt /home/pi/MagicMirror/modules/MMM-voice’ and than ‘bash dependencies.sh’ and it works!

strawberry 3.141

@daveyg_71 i had this experience couple of weeks ago, what helped in my case was shutdown the rpi switch the microphone into another usb slot an restart the pi, then run the command cat /proc/asound/cards to get the same output as in the installer. Sometimes I had to do it a few times until it worked again. But since two months I didn’t had tis issue again.

@Nonamexp Glad you could fix your issue

Nonamexp

This post is deleted!

MichMich

Awesome work!

Would be great if you could configure keywords which show/hide certain modules and configure notifications … something like this:

keywords: {
    'HIDE WEATHER': {
        hide: ['weather']
    }
    'SHOW WEATHER': {
        show: ['weather']
    },
    'SIMPLE MODE': {
        hide: ['default','foo','bar'],
        show: ['simple'] 
    },
    'RESTART': {
        notification: 'RESTART'
    }
}

It might be good to know that I’ll probably be implementing this in the coming weeks: https://forum.magicmirror.builders/topic/241/revising-the-show-hide-mechanism

cowboysdude

@daveyg_71 when you do what strawberry suggested after you reboot redo the

arecord -l

Like he said you may have to do it a couple times but it should show you more than likely your mic is 1

strawberry 3.141

@Nonamexp my guess is because you installed it in /root/… instead of /home/pi/… so it cant find the file

daveyg_71

@strawberry-3.141 Thanks for the advice. I plugged the mic into my Mac and I couldn’t get it to see it. Must be the mic. I ordered a new one so I will find out in a few days.

SimJim

If I run the installation, there is allways a error when it wants to install the PocketSphinx.
What is wrong?

strawberry 3.141

@SimJim do you have some more output to provide?

SimJim

This is what happens all the time…

strawberry 3.141

@SimJim i will test this tonight

Nonamexp

I’ve the next problem: On the Mirror shows the message ‘Error’ , ‘No Moduls identified’.
in the Error Log: Error: spawn pocketsphinx_continuous ENOENT-2

help me pls ;(

strawberry 3.141

@Nonamexp as I said due to installing in root directory the binary will not be found

@SimJim Error code 56 indicates a curl receive error of CURLE_RECV_ERROR which means there was some issue that prevented the data from being received during the clone process. Typically this is caused by a network setting, firewall, VPN client, or anti-virus that is terminating the connection before all data has been transferred. It’s not related to this module this is something general

daveyg_71

@cowboysdude I got the new mic, and the pi can see it now, but the mirror is showing error next to the microphone.

Is there anything wrong with my config file?

            {
                            module: 'MMM-voice',
                            position: 'bottom_bar',
                            config: {
                                    microphone: 1,
                                    keyword: 'MAGIC MIRROR',
                                    timeout: 15,
                    }
            },

strawberry 3.141

@daveyg_71 there is an error log in the mmm-voice directory can you post it? and do you get any errors in the terminal or electron console?

cowboysdude

@strawberry-3.141 said in MMM-voice:

@daveyg_71 there is an error log in the mmm-voice directory can you post it? and do you get any errors in the terminal or electron console?

What please do what @strawberry-3-141 said :) Look in the directory for an error log… or when you start your mirror run it in dev mode: npm start dev

daveyg_71

@strawberry-3.141 I opened up the error log and this is all I see:

1271271271271111111111111111

The mirror starts up with no problems. It just says error next to the microphone symbol.

ostfilinchen

i have sometimes the same error. Do u have restart the mirror via pm2 restart mm?

darrene

Hi @strawberry-3.141, I’ve just tried running the dependencies.sh from the latest .git to install MMM-voice and hit this error in step 5;

[STEP 5/6] Installing npm dependencies
dependencies.sh: line 106: cd: /root/MagicMirror/modules/MMM-voice: No such file or directory
npm WARN enoent ENOENT: no such file or directory, open ‘/root/pocketsphinx/package.json’

despite the fact that pocketsphinx seemed to come down and compile okay. I’m logged in as the pi user via ssh and ran the shell script with sudo bash dependancies.sh.

Do you have any suggestions as to what’s happened?

many thanks