Save performance when rotating screen e.g. on Raspberry Pi

ptrk95

Rotating the screen through custom css (saving performance)

Hello guys,

if you’re running on low end hardware e.g. Raspberry Pi and want to rotate the screen you can rotate it with a custom css file, thus saving precious performance!

Copy paste this code to your custom.css file for a screen rotation of 90degrees:

 body {
        margin: 0;
	position: absolute;
 	transform: rotate(90deg);
 	transform-origin: bottom left;
	width: 100vh;
	height: 100vw;
	object-fit: cover;
	top: -100vw;
        visibility: visible;
 }

Copy paste this code to your custom.css file for a screen rotation of -90degrees:

 body {
	margin: 0;
	position: absolute;
 	transform: rotate(-90deg);
 	transform-origin: top left; 
	width: 100vh;
	height: 100vw;
	object-fit: cover;
	top: 100vh;
        visibility: visible;
 }

Also note that you may have to switch back framebuffer_width and framebuffer_height in your /boot/config.txt file as stated by evroom here, e.g.:

framebuffer_width=1600
framebuffer_height=900

Drawbacks:

since it only rotates the magic mirror app, external apps like omxplayer have to be rotated seperately
you may have to edit the css file of some modules as well

This could be added to the wiki here.

keyun21

@ptrk95 Thanks for sharing your code, so if i understood correctly (newbie here with CSS) I can just copy your code and plug it in my CUSTOM.CSS file and I should good to go (I understand i need to change “90deg” or so based on my monitor setup. TIA.

justjim1220

@ptrk95

this code also works with a 42" TV!

Thanks!!!
:smiling_face:

ptrk95

@keyun21 Correct, just give it a go and see what happens ;) Just delete the lines if something strange occours.

@justjim1220 Thanks for sharing! :)

Only disadvantage here is that you may have to change the styles of other modules, for example the Snow module doesn’t work right of the bat I think.

Also note that there might be a better way to code it, since I just googled how to rotate with CSS :D

evroom

@ptrk95 said in Save performance when rotating screen e.g. on Raspberry Pi:

and want to rotate the screen you can rotate

Did you counter clockwise rotated you screen ?
And therefore did ``transform: rotate(90deg);```??

I originally rotated my screen clock wise (so the top now is on the right hand side) using /boot/config.txt and display_hdmi_rotate=3.
This works fine.

When I use your css example and take out the /boot/config.txt line, it does not work right.
I figured I need rotate(270deg), but then I do not see anything.

Besides that, the omxplayer modules need to be adjusted too (–orientation parameter), so I reverted back to my old method.

My question: can you setup your screen so that it rotates this way that you see everything upside down (to simulate a clockwise rotation in your case) ??
And then share the css code.

ptrk95

@evroom Yes, I did rotate it counter clockwise.

I found a solution that worked for my setup, rotating the screen 270:

 body {
	margin: 0;
	position: absolute;
 	transform: rotate(-90deg);
 	transform-origin: top left; 
	width: 100vh;
	height: 100vw;
	
	object-fit: cover;
	top: 100vh;
        visibility: visible;
 }

Tell me if that worked for you. Then I`ll update the post :)

Adjusting the omxplayer orientation is one of the drawbacks.

evroom

@ptrk95 said in Save performance when rotating screen e.g. on Raspberry Pi:

Tell me if that worked for you.

Almost, but not quite.
It does rotate clock wise, but it is centered.
In Excel analogy: vertical alignment: center.
I would need ‘top’.

This is my custom.css, probably the other settings interfere:

body {
  margin: 0;
  position: absolute;
  transform: rotate(-90deg);
  transform-origin: top left;
  width: 100vh;
  height: 100vw;

  object-fit: cover;
  top: 100vh;
        visibility: visible;
 }

.region.top.left {
  width: 60%;
}

.region.middle.center {
  width: 60%;
}

.region.bottom.left {
  width: 60%;
}

.MMM-HTMLBox {
  font-size: 18px;
  line-height: 22px;
}
.MMM-RTSPStream header {

  text-align: left;
}

.MMM-RTSPStream .innerWrapper {
  border-style: none;
  //border: 1px solid red;
}

I want the left side modules to occupy 60% and the right side modules 40%.
Maybe I have to interpret top, middle and bottom different now ?

evroom

Okay, found it.

In my /boot/config.txt I had the width and height set to 900 and 1600 and this has to be now 1600 and 900.
This is working:

display_hdmi_rotate=0
framebuffer_width=1600
framebuffer_height=900

Works now.

Only need to modify the omxplayer lines to have those streams rotated too.

thedk

Didnt work that easy for me.

You have to take the resolution of your display/monitor in the config.txt, not just 1600,900.
I had to enable overscan, cause the picture was to big.
If you’re using the MMM-Remote_Control the picture is rotated when you have a look at your MagicMirror.

I switched back to the fake KMS driver.

j.e.f.f

Great hack!! I’m going to add this to my CSS 101 guide if that’s OK. I think this is incredibly useful.