You need to edit the /home/pi/MagicMirror/node_modules/rrule-alt/lib/rrule.js file. See the post below.

https://forum.magicmirror.builders/topic/2208/calendar-shows-no-entries-after-mm-update/29?page=3

From the post…
Edit this file

/home/pi/MagicMirror/node_modules/rrule-alt/lib/rrule.js
Go to line 56 or search for the first occurance of “ORDINAL_BASE” and change this line:

ORDINAL_BASE: new Date(1970, 0, 1),
set it to a lower year like 1900.
Then restart your magic mirror (pm2 restart mm)

@Andrius-ok
You need both MMM-Snow and MMM-Remote-Control, and its not just my config you need. here are the basic steps I took…

1. Using home assistant (for me on another pi) https://home-assistant.io/
2. Set up a Sensor in configuration.yaml for HomeAssistant for weather underground

- platform: wunderground
  api_key: xxxxxxxxxxxxx
  monitored_conditions:
    - alerts
    - dewpoint_f
    - temp_f
    - weather

3. Automation in Home Assistant will use sell commands in configuration.yaml to run

switch
    mmsnow:
      command_on: 'curl "http://192.XXX.X.XXX:8090/remote?action=SHOW&module=module_0_MMM-Snow"'
      command_off: 'curl "http://192.XXX.X.XXX:8090/remote?action=HIDE&module=module_0_MMM-Snow"' 

4. Automation in HA calls these when the state changes to "Snow"

• alias: “ShowSnow”
  initial_state: True
  trigger:
  platform: state
  entity_id: sensor.pws_weather
  to: ‘Snow’
  action:

  • service: shell_command.show_snow

• alias: “HideSnow”
  initial_state: True
  trigger:
  platform: state
  entity_id: sensor.pws_weather
  from: ‘Snow’
  action:

  • service: shell_command.hide_snow

I use home assistant along with smartthings to automate my lights...
I plan to share my entire project soon.

You can do this today but need Home Assistant to monitor the weather. This uses weather underground. It works great for me, when it starts snowing my MM displays snow.

see…
https://forum.magicmirror.builders/topic/1232/mmm-snow-yet-another-snow-module/14

@McSorley
I have done this, worked quite well this weekend. Used HomeAssistant to know when it was snowing and if the description changes to “Snow” then have MM unhide the MMM-Snow module. I used RemoteControl to unhide and hide…

This is what I use for my washer/dryer, mine is not on wifi so I have to rely on power and temp sensors to trigger a “running” or “done” state. It may be crude as I may not know exactly what I am doing but it works!

https://github.com/jasondreher/MMM-door-sensor3

And I use Home Assistant (https://forum.magicmirror.builders/topic/10664/home-assistant-controling-my-magic-mirror) to trigger when you may use ifttt.

Great module, but mine keeps flipping between fine and unavailable. When it flips to unavailable I look at the ip address and all looks fine…

any idea what the issue is?

@sdetweil
https://github.com/scottcl88/MMM-DynamicWeather

Once I removed this module I had no issues.

I had a similar issue, the screen would go black after an hour or so (never the login screen just always went black). On of my modules was not compatible with the upgrade. Once I removed that module all was well.

@xkustomz
I do this with my Alexa and home assistant, when the echo dot is in a “Playing” status it shows the module, once it is not it hides it.
Looks like home assistant has an integration for volumio
https://www.home-assistant.io/integrations/volumio/

@SpinCharm
You would have to incorporate something like https://www.home-assistant.io/. This will be able to save a file of what is playing on PLEX and then the MM can show hide…

@sdetweil
I plan on updating this weekend and seeing what shows when this event comes up next, your help is greatly appreciated!!!

@sdetweil
Wow, I cant find your email, I am sure its fairly obvious. Anyway I narrowed down the event that is not showing…
It looks all right, showing “Corrected startDate: Mon Oct 03 2022 19:00:00 GMT-0500 (Central Daylight Time)”

[27.09.2022 09:25.50.700] [DEBUG] start: Mon Sep 12 2022 19:00:00 GMT-0500 (Central Daylight Time)
[27.09.2022 09:25.50.700] [DEBUG] end:: Mon Sep 12 2022 20:00:00 GMT-0500 (Central Daylight Time)
[27.09.2022 09:25.50.701] [DEBUG] duration: 3600000
[27.09.2022 09:25.50.701] [DEBUG] title: TS Boot Camp
[27.09.2022 09:25.50.701] [DEBUG] Search for recurring events between: Tue Sep 27 2022 09:25:50 GMT-0500 (Central Daylight Time) and Tue Sep 26 2023 23:59:59 GMT-0500 (Central Daylight Time)
[27.09.2022 09:25.50.705] [DEBUG] Title: TS Boot Camp, with dates: [“2022-10-03T00:00:00.000Z”,“2022-10-10T00:00:00.000Z”]
[27.09.2022 09:25.50.705] [DEBUG] event.recurrences: undefined
[27.09.2022 09:25.50.706] [DEBUG] recurring date is Sun Oct 02 2022 19:00:00 GMT-0500 (Central Daylight Time) offset is 300
[27.09.2022 09:25.50.706] [DEBUG] recurring date is Sun Oct 02 2022 19:00:00 GMT-0500 (Central Daylight Time) offset is 5 Hour is 19
[27.09.2022 09:25.50.706] [DEBUG] new recurring date2 is Mon Oct 03 2022 19:00:00 GMT-0500 (Central Daylight Time)
[27.09.2022 09:25.50.706] [DEBUG] Corrected startDate: Mon Oct 03 2022 19:00:00 GMT-0500 (Central Daylight Time)
[27.09.2022 09:25.50.707] [DEBUG] initial tz=America/Chicago
[27.09.2022 09:25.50.707] [DEBUG] corrected tz=America/Chicago
[27.09.2022 09:25.50.707] [DEBUG] start date/time=Mon Sep 12 2022 19:00:00 GMT-0500 (Central Daylight Time)
[27.09.2022 09:25.50.707] [DEBUG] start offset=-300
[27.09.2022 09:25.50.707] [DEBUG] start date/time w tz =Mon Sep 12 2022 19:00:00 GMT-0500 (Central Daylight Time)
[27.09.2022 09:25.50.708] [DEBUG] event date=Mon Oct 03 2022 19:00:00 GMT-0500 (Central Daylight Time)
[27.09.2022 09:25.50.708] [DEBUG] event offset=-300 hour=19 event date=Mon Oct 03 2022 19:00:00 GMT-0500 (Central Daylight Time)
[27.09.2022 09:25.50.708] [DEBUG] adjustHours=0
[27.09.2022 09:25.50.708] [DEBUG] duration: 3600000
[27.09.2022 09:25.50.708] [DEBUG] saving event: false
[27.09.2022 09:25.50.709] [DEBUG] recurring date is Sun Oct 09 2022 19:00:00 GMT-0500 (Central Daylight Time) offset is 300
[27.09.2022 09:25.50.709] [DEBUG] recurring date is Sun Oct 09 2022 19:00:00 GMT-0500 (Central Daylight Time) offset is 5 Hour is 19
[27.09.2022 09:25.50.709] [DEBUG] new recurring date2 is Mon Oct 10 2022 19:00:00 GMT-0500 (Central Daylight Time)
[27.09.2022 09:25.50.709] [DEBUG] Corrected startDate: Mon Oct 10 2022 19:00:00 GMT-0500 (Central Daylight Time)
[27.09.2022 09:25.50.709] [DEBUG] initial tz=America/Chicago
[27.09.2022 09:25.50.710] [DEBUG] corrected tz=America/Chicago
[27.09.2022 09:25.50.710] [DEBUG] start date/time=Mon Sep 12 2022 19:00:00 GMT-0500 (Central Daylight Time)
[27.09.2022 09:25.50.710] [DEBUG] start offset=-300
[27.09.2022 09:25.50.710] [DEBUG] start date/time w tz =Mon Sep 12 2022 19:00:00 GMT-0500 (Central Daylight Time)
[27.09.2022 09:25.50.711] [DEBUG] event date=Mon Oct 10 2022 19:00:00 GMT-0500 (Central Daylight Time)
[27.09.2022 09:25.50.711] [DEBUG] event offset=-300 hour=19 event date=Mon Oct 10 2022 19:00:00 GMT-0500 (Central Daylight Time)
[27.09.2022 09:25.50.711] [DEBUG] adjustHours=0
[27.09.2022 09:25.50.711] [DEBUG] duration: 3600000
[27.09.2022 09:25.50.711] [DEBUG] saving event: false
[27.09.2022 09:25.50.712] [DEBUG] Processing entry…
[27.09.2022 09:25.50.712] [DEBUG] Event:

@sdetweil

I do not have broadcastPastEvents: true, in my config.

I will update this weekend, add broadcastPastEvents: true, and see if that fixes anything, thanks.

@sdetweil

I only changed the UID, looks like it started 9/12/22, repeats weekly till 10/12/22. (although some of that is a day off, but that is what some of the other forum items said)

BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20220912T190000
DTEND;TZID=America/Chicago:20220912T200000
RRULE:FREQ=WEEKLY;WKST=SU;UNTIL=20221012T045959Z;BYDAY=MO
DTSTAMP:20220927T001542Z
UID:XXXXXXXXXXXXXXXXXXXX
CREATED:20220901T144823Z
DESCRIPTION:
LAST-MODIFIED:20220913T001004Z
LOCATION:
SEQUENCE:1
STATUS:CONFIRMED
SUMMARY:TS Boot Camp
TRANSP:OPAQUE
END:VEVENT

I see many posts where recurring events are not showing. But I cant find a solution. Has this been fixed somehow?

I am running the default calendar module and my recurring events are not showing.

At one point I used MMM-MyCalendar and that showed all events, but that no longer works with the current MM version.

Any suggestions on another calendar module to use… something similar to the default one?