@Peter I use to have that, and that is when my SD card got full. do a

df -h

and see if the storage is full or not

Just fyi, the “location” under module currentweather is within quote marks (") but I done goofed when I did “****” instead of my real location

@bhepler Ofc, here you go!

 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 */

var config = {
        port: 8080,
        address: "0.0.0.0",
        ipWhitelist: [  "192.168.1.1/24",
                        "::fff:192.168.1.1/112",
                        "127.0.0.1",
                        "::ffff:127.0.0.1",
                        "::1",
                        "0.0.0.0",
                        "192.168.1.22"
                     ], // Set [] to allow all IP addresses.

        language: "sv",
        timeFormat: 24,
        units: "metric",

        modules: [
                {
                        module: "alert",
                },
                {
                        module: "updatenotification",
                        position: "top_bar"
                },
                {
                        module: "clock",
                        position: "top_left"
                },
                {
                        module: "calendar",
                        header: "Min Kalender",
                        position: "top_left",
                        config: {
                                colored: "true",
                                calendars: [
                                        {
                                                symbol: "calendar-check-o ",
                                                url: "A-SUPER-SECRET-URL"
                                        }
                                ]
                        }
                },
                {
                        module: "compliments",
                        position: "lower_third"
                },
                {
                        module: "currentweather",
                        position: "top_right",
                        config: {
                                location: ****",
                                locationID: "",  //ID from http://www.openweathermap.org/help/city_list.txt
                                appid: "A-SUPER-SECRET-API"
                        }
                },
                {
                        module: "weatherforecast",
                        position: "top_right",
                        header: "Weather Forecast",
                        config: {
                                colored: "true",
                                location: "****",
                                locationID: "",  //ID from http://www.openweathermap.org/help/city_list.txt
                                appid: "A-SUPER-SECRET-API"
                        }
                },
                {
                        module: "newsfeed",
                        position: "bottom_bar",
                        config: {
                                feeds: [
                                        {
                                                title: "VK",
                                                url: "http://www.vk.se/feed"
                                        },
                                        {
                                                title: "Expressen",
                                                url: "http://expressen.se/rss/nyheter"
                                                //encoding: "ISO-8859-1",
                                        },
                                        {
                                                title: "Krisinformation.se",
                                                url: "https://www.krisinformation.se/nyheter/nyheter-som-rss",
                                                encoding: "ISO-8859-1",
                                        }


                                ],
                                showSourceTitle: true,
                                showPublishDate: true
                        }
                },

// EGNA MODULER NEDAN

// Remote-Control
{
    module: 'MMM-Remote-Control'
    // uncomment the following line to show the URL of the remote control on the mirror
    // , position: 'bottom_left'
    // you can hide this module afterwards from the remote control itself
},

// mmm-weatherchart

{
        module: 'mmm-weatherchart',
        position: 'bottom_center', // this can be any of the regions
        config: {
                country: 'Sverige', // as determined above
                area: 'Västerbotten', // as determined above
                city: '****', // as determined above
                updateInterval: 60 * 60 * 1000, // update every hour
                hideBorder: true, // whether or not a border with city name should be shown
                }
},


// ???


// SKRIV INGET NEDANFÖR
        ]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

Hi! I have problems that Currentweather and Weatherforecast has gone away.
Via MM-Remote I can see that they are offline due to “This module was hidden by module_5_currentweather, it can not be shown.” and “This module was hidden by module_6_weatherforecast, it can not be shown.” and I can’t get it to show again.

Any ideas what I could do? It has worked before.

Check this out:
https://git-scm.com/book/en/v2/Getting-Started-First-Time-Git-Setup
Read under “Your Identity”

You need to do two commands and change everything that is in quote marks ("):

1. git config --global user.email "Richard238@hotmail.com"
   

2. git config --global user.name “Richard Doe”
   

Does that makes sense? I had some trouble too at first

Yea, same here

@Richard238 I live with the idea that “if it work, dont ask why”.
So I can’t explain why config.js dont work.

Do you edit the config.js?
Well… you could be a outlaw and edit the “~/MagicMirror/modules/default/compliments/compliments.js”.
I’ve done that before and it works. But beware of typos. Make a backup! :)

Dude, I just tried this for the first time.
Holy shit, I love it! Nice work!

Hi. Can you do

sudo cat /home/pi/MagicMirror/npm-debug.log

and post some of that code?

I’ve sovled it.
You have to edit /MagicMirror/node_modules/frameguard$/index.js and comment the line
“// res.setHeader(‘X-Frame-Options’, directive)”

After some googlesearch I’ve discoverd that now you can’t iFrame MM in chrome due to X-frame-options on the page.
Is there a way to bypass this through MM or is it just time to revert to MM 2.0 again?

EDIT Narrowed it down to that I must change the X-Frame-Options in the MM… I think.

Hi. I just updated MM and it works pretty well. However…
I have my MM in a Virtual Machine and have a own local website that acceess the MM with iframe, but can’t get it to work.

I can access the MM through chrome direct IP but when it access through the website, it doesn’t work. I have whitelisted the whole network (192.168.X.X)
im no pro at this so, any help will do.

@number1dan Wow, that did the trick! Thank you so much. I was about to loose hope on a twitterfeed on my mirror.
Happy new years!

Hi. I am in big use of a some kind of twitterfeed. There is one Module out there call “twitcontrol” but it seems buggy and hasn’t been updated nor fixed in a long time.
Is there anyone else that has a function twitterfeed module?

Got any updates on this problem? I was about to use twitcontrol on my mirror but get same problem as above. Can only see the Title, but no feeds.

Hi. Dod you do: Enter the repository: cd ~/MagicMirror and then Install and run the app: “npm install && npm start” ?

I have the same problem and have not yet tried to fixed it (Yea, Im lazy)… But I did another MM where it just works…
I have a theory… I think (just think, absolute not sure) that you have to “npm install && npm start” in “/MagicMirror” folder that got mine working.

As I said, not tried this theory yet…

Cool and interesting! Im gonna try it out and see how it works. :)