@Fozi good to know. The remote function is still on my todo list

Okay, I found the bug myself. For me, the sensor only works when all modules are loaded.

everything went smoothly yesterday, but today he no longer reacts in MagicMirror.

But when I start the py file in the modules folder it shows me the gestures in the command line.

Except for a restart of the Pis, I have not changed in the config.

What could be the fault here?

/* Magic Mirror green 42 Zoll
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information on how you can configure this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */

var config = {
	address: "localhost", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out or empty, is "localhost"
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "de",
	timeFormat: 24,
	units: "metric",
	// serverOnly:  true/false/"local" ,
			     // local for armv6l processors, default
			     //   starts serveronly and then starts chrome browser
			     // false, default for all  NON-armv6l devices
			     // true, force serveronly mode, because you want to.. no UI on this device

	modules: [
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
		  module: "MMM-Screencast",
		  position: "middle_center",
			config: {
				position: "center",
				height: "300",
				width: "500"
			}
		},
		{
			module: "clock",
			position: "top_left",
			config: {
				displayType: "digital",
				displaySeconds: "false",
				showWeek: "true",
				clockBold: "true"
			}
		},
		{
			module: "calendar",
			header: "Termine",
			position: "top_left",
			config: {
				calendars: [
					{
						symbol: "calendar-check",
						url: "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
					}
				]
			}
		},
		{
			module: "MMM-DarkSkyForecast",
			header: "Wetter",
			position: "top_right",
			classes: "default everyone",
			disabled: false,
			config: {
				apikey: "XXXXXXXXXXXXXXXXXXXXXXXXX", // Anmeldung bei darkskyforecast erforderlich
				latitude: "XXXXXXXX", // eingabe von Standortkoordinaten
				longitude: "XXXXXXXXX",
				iconset: "3c",
				concise: "true", //mehr oder weniger infos anzeigen lassen
				forecastLayout: "tiled", // tiled or table
				updateInterval: "10",
				showSummary: "false",
				label_days: ["So", "Mo", "Di", "Mi", "Do", "Fr", "Sa"],
				label_timeFormat: "k[h]",
				showWind: "false",
				language: "de"
			}
		},
		{
			module: "MMM-pages",
			config: {
				modules:
						[
							["clock", "calendar", "MMM-DarkSkyForecast", "newsfeed"],
							["MMM-Comics", "MMM-horoscope"],
							["newsfeed"]
						],
				fixed: ["alert", "clock", "updatenotification", "MMM-page-indicator", "MMM-GroveGestures"],
			}
		},
		{
			module: "MMM-page-indicator",
			position: "bottom_bar",
			config: {
				pages: 3,
			}
		},
		{
			module: "MMM-GroveGestures",
			position: "bottom_left",
			config: {
				autoStart: true, //When Mirror starts, recognition will start.
				verbose:true, // If set as `true`, useful messages will be logged.
				recognitionTimeout: 1000, //Gesture sequence will be ended after this time from last recognized gesture.
				cancelGesture: "WAVE", //If set, You can cancel gesture sequence with this gesture.
				visible: true, //Recognized gesture sequence will be displayed on position
				idleTimer: "0", // `0` for disable, After this time from last gesture, onIdle will be executed.
				defaultCommandSet: "DEFAULT_MODE",
				commandSet: {
					"DEFAULT_MODE": {
						"UP": {
						  shellExec: "amixer set Speaker -- 15%+" // Erhöht die Lautsärke um 15%
						},
						"DOWN": {
						  shellExec: "amixer set Speaker -- 15%-" // verringert die Lautstärke um 15%
						},
						"CLOCKWISE": {
						  shellExec: "vcgencmd display_power 1" // schaltet den HDMI Port am Pi an. Monitor geht an
						},
						"ANTICLOCKWISE": {
						  shellExec: "vcgencmd display_power 0" // schaltet den HDMI Port am Pi aus. Monitor geht in Standby
						},
						"LEFT": {
						        notificationExec: {
						          notification: "PAGE_DECREMENT",
						        }
						},
						"RIGHT": {
						        notificationExec: {
						          notification: "PAGE_INCREMENT",
						        }
	      					},
					},
					"0": {
						"UP": {
						  shellExec: "amixer set Speaker -- 15%+" // Erhöht die Lautsärke um 15%
						},
						"DOWN": {
						  shellExec: "amixer set Speaker -- 15%-" // verringert die Lautstärke um 15%
						},
						"CLOCKWISE": {
						  shellExec: "vcgencmd display_power 1" // schaltet den HDMI Port am Pi an. Monitor geht an
						},
						"ANTICLOCKWISE": {
						  shellExec: "vcgencmd display_power 0" // schaltet den HDMI Port am Pi aus. Monitor geht in Standby
						},
						"LEFT": {
						        notificationExec: {
						          notification: "PAGE_DECREMENT",
						        }
	      					},
						"RIGHT": {
						        notificationExec: {
						          notification: "PAGE_INCREMENT",
						        }
	      					},
					},
					"1": {
						"UP": {
						  shellExec: "amixer set Speaker -- 15%+" // Erhöht die Lautsärke um 15%
						},
						"DOWN": {
						  shellExec: "amixer set Speaker -- 15%-" // verringert die Lautstärke um 15%
						},
						"CLOCKWISE": {
						  shellExec: "vcgencmd display_power 1" // schaltet den HDMI Port am Pi an. Monitor geht an
						},
						"ANTICLOCKWISE": {
						  shellExec: "vcgencmd display_power 0" // schaltet den HDMI Port am Pi aus. Monitor geht in Standby
						},
						"LEFT": {
						        notificationExec: {
						          notification: "PAGE_DECREMENT",
						        }
	      					},
						"RIGHT": {
						        notificationExec: {
						          notification: "PAGE_INCREMENT",
						        }
	      					},
					},
					"2": {
						"UP": {
						  shellExec: "amixer set Speaker -- 15%+" // Erhöht die Lautsärke um 15%
						},
						"DOWN": {
						  shellExec: "amixer set Speaker -- 15%-" // verringert die Lautstärke um 15%
						},
						"CLOCKWISE": {
						  shellExec: "vcgencmd display_power 1" // schaltet den HDMI Port am Pi an. Monitor geht an
						},
						"ANTICLOCKWISE": {
						  shellExec: "vcgencmd display_power 0" // schaltet den HDMI Port am Pi aus. Monitor geht in Standby
						},
						"LEFT": {
						        notificationExec: {
						          notification: "PAGE_DECREMENT",
						        }
	      					},
						"RIGHT": {
						        notificationExec: {
						          notification: "PAGE_INCREMENT",
						        }
						},
					}
				},
				commandSetTrigger: {
					  "DEFAULT_MODE": "DEFAULT_MODE",
					  "PAGE_NUMBER_IS": (payload) => {return payload;}
				},
			}
		},
		{
			module: "MMM-NotificationTrigger",
			config: {
				useWebhook: false,
				triggers: [
					{
						trigger: "PAGE_DECREMENT",
						fires: [
							{
								fire: "QUERY_PAGE_NUMBER",
							}
						]
					},
					{
						trigger: "PAGE_INCREMENT",
						fires: [
							{
								fire: "QUERY_PAGE_NUMBER",
							}
						]
					}
				]
			}
		},
		  {
			module: "MMM-horoscope",
			position: "top_right",
			config: {
				sign: "libra",
			}
		},
		{
			module: "MMM-Comics",
			position: "Bottom_left",
			config: {
				comics: ["dilbert", "xkcd", "garfield", "peanuts", "calvin+hobbes"],
				updateInterval : 1000 * 60 * 30,
				coloredImage: true,
				maxWidth: 500,
				maxHeight: 500,
				timeForDaily: [6, 9],
			}
		},
		{
			module: "newsfeed",
			position: "bottom_center",
			config: {
				feeds: [
					{
						title: "Tagesschau",
						url: "http://www.tagesschau.de/xml/rss2"
					}
				],
				showSourceTitle: "true",
				showPublishDate: "true",
				showDescription: "true",
				lengthDescription: "400", //1-500 default is 400
				updateInterval: "20000" //1000-60000 defalut is 10000 (10sek)
			}
		},
	]
};
/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

Thank you for your instructions. Unfortunately, this does not work for me. I have a 42 “frame over a 32” monitor.
The monitor is only a part of the touch frame area.
According to your instructions, no error message appears, but the ratio does not fit in the calibration. Do you have a tip for me here?

I installed the module “MMM-Screencast” and tested it with the jack output of the Raspberry Pi3b +. It works perfectly.

Now the sound is very bad, so I installed the Pifiberry DAC +.

Only change:
under /boot/config.txt the line

dtparam = audio = on

commented out and
dtoverlay = hifiberry-dacplus
inserted.

Now a file
/etc/asound.conf
created with the following content:

pcm.! default {
type hw card 0
}
ctl! default
type hw card 0
}

Then a restart. now the sound comes over the pifiberry. Everything works fine with the Spotify module. But MMM-Screencast is no longer playing Youtube videos: ((

Does one have an idea why it could be? or an alternative to stream Youtube videos ???

@justjim1220 said in MMM-NewsFeedTicker:

display: none;

Many thanks for the answer. Yes, I also thought about buying a stronger computer. What is your opinion on the Asus Tinkerboard? would he fix the problem?

Hello,
Great module, exactly what I was looking for. however, the lettering stutters. Is there a way to fix this? I use a Rasperry pi3. How do I remove the logo from the feed? Many thx

my config.js

  	{
  	  module: "MMM-NewsFeedTicker",
  	  position: "middle_center",
  	  //classes: "day_scheduler",
  	  config: {
  	    feeds: [
      		{
      			title: "sportBILD",
      			url: "https://sportbild.bild.de/rss/vw-fussball/vw-fussball-45036878,sort=1,view=rss2.sport.xml",
      			encoding: "UTF-8",
      			className: "myClass",
      			//defaultLogo: ""
      		}
	      ]
  	  }
    },

and my custom.css

.MMM-NewsFeedTicker {
    width: 80;
    height: 30px;
    background-color: none;
 }
.MMM-NewsFeedTicker .tickerbody {
    position: absolute;
    bottom: 10px;
    transform: translateZ(0);
    backface-visibility: hidden;
    animation: marquee 30s linear infinite;
}
.MMM-NewsFeedTicker .image {
    margin-left: 0;
    bottom: 10px;
    height: 30px;
}

@evroom said in MMM-Soccer - Soccer Standings:

show: ‘GERMANY’,

OK. Thank you very much. Have excluded the paid. Now it works.

Re: MMM-newsfeedtouch - News so hot you wanna touch it

Is it possible to display the picture of the feed with when the headline is typed?

Hello,
I would like to display several leagues. But my module shows only “Loading …”.
Where is the mistake? Do you have any tip

    {
        module: "MMM-soccer",
        position: "bottom_right",
        config: {
            api_key: "XXXX129ce6f9XXXXXXXXXXXXXXXXX",
            colored: "true",
            logos: "true",
            leagues:{
              "GERMANY": "BL1",
              "GERMANY": "DFB",
              "GERMANY": "BL2",
              "EUROPE": "CL",
              "WORLD": "WC",
            },
        }
    },