@sdetweil @bugsounet pi@raspberrypi:~ $ npm run install-mm npm ERR! Missing script: "install-mm" npm ERR! npm ERR! Did you mean this? npm ERR! npm install # Install a package npm ERR! npm ERR! To see a list of scripts, run: npm ERR! npm run npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2024-04-26T16_46_42_166Z-debug-0.log pi@raspberrypi:~ $ ^C pi@raspberrypi:~ $ git pull fatal: ni ceci ni aucun de ses répertoires parents n'est un dépôt git : .git pi@raspberrypi:~ $ cd ~/MagicMirror rm -rf node_modules git reset --hard origin git pull npm run install-mm HEAD est maintenant à 5ea8a346 Release 2.27.0 (#3410) astuce: Tirer sans spécifier comment réconcilier les branches divergentes astuce: est découragé. Vous pouvez éliminer ce message en lançant une des astuce: commandes suivantes avant votre prochain tirage : astuce: astuce: git config pull.rebase false # fusion (stratégie par défaut) astuce: git config pull.rebase true # rebasage astuce: git config pull.ff only # avance rapide seulement astuce: astuce: Vous pouvez remplacer "git config" par "git config --global" pour que astuce: ce soit l'option par défaut pour tous les dépôts. Vous pouvez aussi astuce: passer --rebase, --no-rebase ou --ff-only sur la ligne de commande pour astuce: remplacer à l'invocation la valeur par défaut configurée. Déjà à jour. > magicmirror@2.27.0 install-mm > npm install --no-audit --no-fund --no-update-notifier --only=prod --omit=dev > magicmirror@2.27.0 postinstall > npm run install-vendor && npm run install-fonts && echo "MagicMirror² installation finished successfully! > " > magicmirror@2.27.0 install-vendor > echo "Installing vendor files ... > " && cd vendor && npm install --loglevel=error --no-audit --no-fund --no-update-notifier Installing vendor files ... changed 1 package in 10s > magicmirror@2.27.0 install-fonts > echo "Installing fonts ... > " && cd fonts && npm install --loglevel=error --no-audit --no-fund --no-update-notifier Installing fonts ... changed 2 packages in 4s MagicMirror² installation finished successfully! > magicmirror@2.27.0 prepare > [ -f node_modules/.bin/husky ] && husky || echo no husky installed. no husky installed. added 483 packages in 2m pi@raspberrypi:~/MagicMirror $ After a reboot of my Pi the icone on the top of my screen have change [image: 1714210134311-sans-titre.png] and my MM launch but I have a problem of Library : About GA of Bugsounet “Library loading error” remains displayed on my screen… [image: 1714210512088-sans-titre1.png] I tried to update GA without success : [image: 1714211753019-sans-titre2.png] I post the question on the Bugsounet forum thank you very much both for your help !!

@RIKKO14 thank you! perfect

@RIKKO14 You also might still need support with MMM-GoogleAssistant - you’ll need to go to Bugsounet’s forums to get that tho. He’s decided he don’t wanna play here.

@RIKKO14 Do you know of a tides API that is free? Let’s start there.

sounds like a fresh install is needed as something got corrupted and copy over your MM folder to new install.

@RIKKO14 see https://github.com/sdetweil/uploadPics then u have to have a module that displays pictures. you said “old Huawei P9”, some don’t handle QR.

ok, thank you.

hello, how to update node.js and npm? The screen of my MagicMirror shows that an update is available but nothing to download on my Pi, what should I do ? [image: 1666342455285-sans-titre.png] [image: 1666342466563-sans-titre1.png]

Hello, How to update node.js and npm ? my MagicMirror screen shows that an update is available but I have nothing to install on my Pi , what I have do ? [image: 1666340461453-sans-titre.png] [image: 1666340511091-sans-titre1.png]

@RIKKO14 can u open the advert tab and see what it is? there shouldn’t be any advert showing from MM content

@RIKKO14 updating ALL addon modules is the same stop MagicMirror cd ~/MagicMirror/modules/modulename git pull if the module has a package.json file, then npm install restart MagicMirror

Thanks very much, it’s good.

Hello, For several days my MMM-DHT-Sensor module does not update, I have to restart the MagicMirror for the temperature to move. I uninstalled and reinstalled the module and bcm2835 I also changed the DHT22 sensor with a new one but the problem persists. I did not however change anything in the parameters of my config.js { module: "MMM-DHT-Sensor", position: "top_right", header: "T° Appartement", config: { sensorPin: 4, sensorType: 22, updateInterval: 100 * 1000, initialLoadDelay: 0, animationSpeed: 1000, units: "metric", relativeScale: 35, debug: false } }, what should I do ?

D’après ce que je vois, la compréhension est compliqué (même si je le met en signature et en grand + écris dans la réponse precedente…) Je comprend maintenant pourquoi tu ouvre autant de sujet Désolé, je peux pas plus… Bonne soirée (et bon courage !) @bugsounet

@crazylegs You can’t display any © video on MagicMirror with modify main code

@Jalibu I don’t believe but I’m not sure

@mann “Does the PI 4 support turning USB power off and on in software at all? If it does, how to do it?” : I don’t understand what you are telling me, so what should I do?

@rikko14 Just a final hint. The only module that seems to have a problem is MMM-soccer. You can check that module to see if it has a package.json. If it does then DO NOT run the npm init -y. However, looking at the MMM-soccer module on Github it has been updated to use node-fetch. You probably need to do a git pull && npm install in the MMM-soccer module folder to get the latest version of the module. Then start the mirror with pm2. pm2 start mm or however you start it with pm2. then pm2 stop and then pm2 log --lines 100 and post the log output if you are still experiencing the black screen.

@rikko14 mm doesn’t change the system config at all.

I was able to update, with patience and tenacity, to 2.17 by following the instructions of Bugsounet (http://forum.bugsounet.fr/topic/604/i-lost-mmm-weather-and-mmm-shom- after-upgrading-mm-2-12-to-2-17 / 27) It’s not my job, it’s the job of this forum :) but sometime i’m kind… however, I noticed that after the update I lost the sound of my two small speakers connected in jacks, how can I recover the sound? is there a radio module that works in the background (i.e. without displaying anything on the MM screen) It’s not related to the update, it’s related to your OS. See the desktop os and check Sound icon to set your card by default Please stop opening many topic everywhere… it’s the good way to have bad response and breaking entire OS