@steed said in i need help getting the dailybibleverse module set up.: i pasted the MMM-DailyBibleVerse folder here ‘/home/pi/MagicMirror/modules/default/MMM-DailyBibleVerse’ This path is incorrect. Modules go in the /home/pi/MagicMirror/modules folder. That path is assumed when you add the module name to the config.js entry. So when you type module: 'MMM-DailyBibleVerse', it’s going to look in that path for a folder with that name.

Did anybody got this MMM-Simple_Swipe module to run “right out of the box”? I’ve installed it but it’s not working. My guess (offcourse) would be that I’ve done something wrong! I’m excluding things by asking around. So If anybody (beside the 2 creators :smiling_face_with_open_mouth_smiling_eyes: :smiling_face_with_open_mouth_smiling_eyes: ) got it working this would help me to determine if the problem is with my setup. (I did have contact with one of the module makers but I don’t want to push them and offcourse… they have a life to so I don’t want to harass them :smiling_face_with_open_mouth_cold_sweat: :smiling_face_with_open_mouth_cold_sweat: )

Hi, I have been looking for a web interactive table that works like tabulator for many many months, and I am so happy to have found it. I am a self-taught html user and do not know programming. As I am not a developer, I have problem integrating tabulator into cpanel and my website. I do not understand the installation steps on tabulator.info, as I do not know how to install bower, npm or magic mirror. Can someone extend a helping hand to me? Thanks, Michelle

Have you tried adjust the refresh frequency to make it not query the API so often?

Ahh… so simpel -.- works. Thank you

@jasondreher said in sendNotification help: this.time = payload probably this.config.time = payload

@sdetweil I think I’ll just start over again with a reimage of the sd card.:persevering_face: I’ve checked the package.json file in the electron folder and it showed version 2.0.16 So I entered that number at the bottom of the package.json file in the MMM-Swipe folder and run npm install again in the Swipe folder. Yet it gave me: pi@Mirror:~/MagicMirror/modules/MMM-Swipe $ npm install npm ERR! code ETARGET npm ERR! notarget No matching version found for electron-rebuild@^2.0.16 npm ERR! notarget In most cases you or one of your dependencies are requesting npm ERR! notarget a package version that doesn't exist. npm ERR! notarget npm ERR! notarget It was specified as a dependency of 'MMM-Swipe' npm ERR! notarget npm ERR! A complete log of this run can be found in: npm ERR! /home/pi/.npm/_logs/2019-01-15T22_09_44_953Z-debug.log pi@Mirror:~/MagicMirror/modules/MMM-Swipe $ Thanks for helping me out so far. How do you know al this stuff? How long are you already doing this? Hope I’ll get that smart one day. :grinning_face:

@ianperrin said in MMM-NetworkScanner Icons: font awesome 4 great, thannks and also thx to @Mykle1

@sean Thanks. Thanks to that, I solved it quickly

@bibi 1 added a calendar entry for later the same day as I was configing the dual calendars… long as public, all ok… yes, you need different IDs for the calendar definitions

@skorpionbird after about 12hours memory says it’s only got 2/3 percent left so I suspect it to be a memory leak issue with module as when MM first starts it says I have 32-38 percent ram free

@sworrs Nevermind. I don’t read manual also. :D

@twwilkerson1 You’re missing a comma at the end of the “MMM-quote-of-the-day” entry and there is a comma out of place in the sensor entry. Everything else looks good. Try these please. { module: "MMM-Pollen", position: "top_left", header: "Pollen Forecast", config: { updateInterval: 3 * 60 * 60 * 1000, // every 3 hours zip_code: "90210" } }, { module: "MMM-quote-of-the-day", position: "lower_third", config: { language: "en", updateInterval: "1d" } }, { module: 'MMM-PIR-Sensor', config: { sensorPin: 17, powerSaving: true // See 'Configuration options' for more information. } },

Dont work:frowning_face: but thank you for your help. i hope another user can help me to find a solution

Hello again, i still have the same problem with goggle calendar fullday entries. For example an entry for 2 fulldays (01/19-01/20) will be: ics data from the google calendar link: … DTSTART;VALUE=DATE:20190119 DTEND;VALUE=DATE:20190121 So the module shows [image: 1547387176741-cfe1d622-ea2e-4194-aaf1-f781ddc5a45d-grafik.png] So i check all timezone / language etc. settings, in MM, modules section and raspi settings with no success. Calendar views in google calendar webpage, android calendar apps and also outlook 365 are correct (2 days not 3). my config module: 'calendar', header: 'Familienkalender', position: 'bottom_left', config: { maximumEntries: 13, displaySymbol: false, maxTitleLength: 24, fade: true, fadePoint: 0.7, fullDayEventDateFormat: 'Do MM k:mm', timeFormat: 'absolute', dateFormat: 'Do MMM k:mm', urgency: 0, colored: false, coloredSymbolOnly: true, calendars: [ { url: 'https://calendar.google.com/calendar/ical/.../basic.ics' }, ], } Thanks for any hint Joerg

would this ring a bell to anyone? 0 info it worked if it ends with ok 1 verbose cli [ ‘/usr/bin/nodejs’, ‘/usr/bin/npm’, ‘start’, ‘dev’ ] 2 info using npm@3.10.8 3 info using node@v6.9.1 4 verbose stack Error: missing script: start 4 verbose stack at run (/usr/lib/node_modules/npm/lib/run-script.js:151:19) 4 verbose stack at /usr/lib/node_modules/npm/lib/run-script.js:61:5 4 verbose stack at /usr/lib/node_modules/npm/node_modules/read-package-json/read-json.js:356:5 4 verbose stack at checkBinReferences_ (/usr/lib/node_modules/npm/node_modules/read-package-json/read-json.js:320:45) 4 verbose stack at final (/usr/lib/node_modules/npm/node_modules/read-package-json/read-json.js:354:3) 4 verbose stack at then (/usr/lib/node_modules/npm/node_modules/read-package-json/read-json.js:124:5) 4 verbose stack at /usr/lib/node_modules/npm/node_modules/read-package-json/read-json.js:311:12 4 verbose stack at /usr/lib/node_modules/npm/node_modules/graceful-fs/graceful-fs.js:78:16 4 verbose stack at tryToString (fs.js:455:3) 4 verbose stack at FSReqWrap.readFileAfterClose [as oncomplete] (fs.js:442:12) 5 verbose cwd /home/pi/MagicMirror/modules/MMM-Globe 6 error Linux 4.4.26-v7+ 7 error argv “/usr/bin/nodejs” “/usr/bin/npm” “start” “dev” 8 error node v6.9.1 9 error npm v3.10.8 10 error missing script: start 11 error If you need help, you may report this error at: 11 error https://github.com/npm/npm/issues 12 verbose exit [ 1, true ]

Hmmmmmm… Hooked up the wires to the GPIO pins. configured the Swipe module and hit start to run the MM2. I know … I forgot to configure the Notification module. But I first wanted to see if the sensors worked by displaying the measured distances on the MM2 screen. BUT…on starting the MM2 it freezes! Ctrl+Q, Alt, Esc … nothing works. Only pulling the powercord out of the wallsocket! :crying_face: :crying_face:

Please use the Markdown features of the board when posting code or logs.

@costascontis motion is trying to write it’s log to /var/log, which requires root authority. I think u can change this in motion.conf