MMM-PIR-Sensor - White Screen

strawberry 3.141 · Oct 26, 2016, 5:52 PM

@bibi you forgot to close the config section in the newsfeed module, add } after showPublishDate: true and you should be fine

bibi · Oct 26, 2016, 8:07 PM

@strawberry-3.141 yeah! thx a lot. at least i can see this white screen now :p :))) have to figure out how to solve this… Only if it’s realllllly really obvious for you/someone, i post my log file. (sorry to ask so much) otherwise not prob, i will reinstall the PIR module…

[TAILING] Tailing last 10 lines for [mm] process (change the value with --lines option)
/home/pi/.pm2/logs/mm-error-0.log last 10 lines:
0|mm       |     at Error (native)
0|mm       |     at process.module.(anonymous function) [as dlopen]     (ELECTRON_ASAR.js:168:20)
0|mm       |     at Object.Module._extensions..node (module.js:583:18)
0|mm       |     at Object.module.(anonymous function) [as .node] (ELECTRON_ASAR.js:168:20)
0|mm       |     at Module.load (module.js:473:32)
0|mm       |     at tryModuleLoad (module.js:432:12)
0|mm       |     at Function.Module._load (module.js:424:3)
0|mm       |     at Module.require (module.js:483:17)
0|mm       |     at require (internal/module.js:20:19)
0|mm       |     at bindings (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/bindings/bindings.js:76:44)

 /home/pi/.pm2/logs/mm-out-0.log last 10 lines:
 0|mm       | No helper found for module: clock.
 0|mm       | Initializing new module helper ...
 0|mm       | No helper found for module: compliments.
 0|mm       | No helper found for module: currentweather.
 0|mm       | No helper found for module: weatherforecast.
 0|mm       | Initializing new module helper ...
 0|mm       | Whoops! There was an uncaught exception...
 0|mm       | MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
 0|mm       | If you think this really is an issue, please open an issue on GitHub:    https://github.com/MichMich/MagicMirror/issues
 0|mm       | Launching application.

bibi · Oct 26, 2016, 8:53 PM

Ok the problem it’s solved! except the screen is turning on and off in a very strange way… have to figure out why.

For those you would get the same issue as me, what i did after fixing my config file was:

sudo apt-get update & upgrade & reboot,
go in MMM-PIR-Sensor folder in modules folder and run npm install there
3.sudo reboot
cheers

Medo · Jan 2, 2017, 9:31 AM

Also had the “white screen” problem. I installed a complete new Raspian (with PIXEL), a new MagicMirror - including node.js in version 7.3.0
As soon as i tried to get the MMM-Pir-Sensor working, it failed (with an white screen). Heres, how i solved my problem.

At first: Theres no need to downgrade the node (i tried this too, and had no luck)

I figured out, that my problem was an MMM-PIR-Sensor installation error i did not recognized at the beginning. When i tried “npm install” i got something like this (an error):

"gyp WARN EACCES user “root” does not have permission to access the dev dir “/root/.node-gyp/5.12.0”

I figured out, that there are two ways of solving this:

CHOWN the directory the install procedure tries to install
use “npm install --unsafe-perm”

Im aware that option two is not the “elegant” way, but it solved my problem (and i did not have to change directory permissions).

I removed all files and git the files again (like described some lines above from banglee) and then just use “npm install --unsafe-perm”

The “–unsafe-perm” option was the key to my problem…

zichao92 · Jan 2, 2017, 9:31 AM

Hi @Medo ,
I have gotten the white screen problem as well and my raspberry pi configuration is similar to yours ( running on PIXEL with the latest nodejs).

However, upon using option 2 from your solution. I have obtained this error :

npm ERR! Linux 4.4.38-v7+
npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "install" "--unsafe-perm"
npm ERR! node v7.3.0
npm ERR! npm  v3.10.10
npm ERR! code ELIFECYCLE
npm ERR! Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall: `electron-rebuild -e                                                                                                                                                              ../../node_modules/electron-prebuilt`
npm ERR! Exit status 255
npm ERR!
npm ERR! Failed at the Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall script '                                                                                                                                                             electron-rebuild -e ../../node_modules/electron-prebuilt'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the Magic-Mirror-Module-P                                                                                                                                                             IR-Sensor package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR!     electron-rebuild -e ../../node_modules/electron-prebuilt
npm ERR! You can get information on how to open an issue for this project with:
npm ERR!     npm bugs Magic-Mirror-Module-PIR-Sensor
npm ERR! Or if that isn't available, you can get their info via:
npm ERR!     npm owner ls Magic-Mirror-Module-PIR-Sensor
npm ERR! There is likely additional logging output above.

npm ERR! Please include the following file with any support request:
npm ERR!     /home/pi/MagicMirror/modules/MMM-PIR-Sensor/npm-debug.log

Does anyone have solution to this?

Note from admin: Please use Markdown on code snippets for easier reading!

Medo · Jan 2, 2017, 10:22 AM

@zichao92

First things that come to my mind:

maybe a “sudo” is missing? Like sudo npm install --unsafe-perm?
are you executing this from the MMM-PIR-Sensor directory ?

zichao92 · Jan 2, 2017, 11:22 AM

Hi @Medo, Thanks for the reply.
1.) I tried this method and it gives an output of the following error.

pi@raspi:~/MagicMirror/modules/MMM-PIR-Sensor $ sudo npm install --unsafe-perm
npm WARN prefer global npm@3.10.10 should be installed with -g
> epoll@0.1.20 install /home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/epoll
> node-gyp rebuild
make: Entering directory '/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/epoll/build'
  CXX(target) Release/obj.target/epoll/src/epoll.o
  SOLINK_MODULE(target) Release/obj.target/epoll.node
  COPY Release/epoll.node
make: Leaving directory '/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/epoll/build'
> nslog@3.0.0 install /home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/nslog
> node-gyp rebuild
make: Entering directory '/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/nslog/build'
  CXX(target) Release/obj.target/nslog/src/main.o
  CXX(target) Release/obj.target/nslog/src/nslog_linux.o
  SOLINK_MODULE(target) Release/obj.target/nslog.node
  COPY Release/nslog.node
make: Leaving directory '/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/nslog/build'
> Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall /home/pi/MagicMirror/modules/MMM-PIR-Sensor
> electron-rebuild -e ../../node_modules/electron-prebuilt
Unable to find electron-prebuilt's version number, either install it or specify an explicit version
npm ERR! Linux 4.4.38-v7+
npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "install" "--unsafe-perm"
npm ERR! node v7.3.0
npm ERR! npm  v3.10.10
npm ERR! code ELIFECYCLE
npm ERR! Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall: `electron-rebuild -e ../../node_modules/electron-prebuilt`
npm ERR! Exit status 255
npm ERR!
npm ERR! Failed at the Magic-Mirror-Module-PIR-Sensor@1.1.0 postinstall script 'electron-rebuild -e ../../node_modules/electron-prebuilt'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the Magic-Mirror-Module-PIR-Sensor package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR!     electron-rebuild -e ../../node_modules/electron-prebuilt
npm ERR! You can get information on how to open an issue for this project with:
npm ERR!     npm bugs Magic-Mirror-Module-PIR-Sensor
npm ERR! Or if that isn't available, you can get their info via:
npm ERR!     npm owner ls Magic-Mirror-Module-PIR-Sensor
npm ERR! There is likely additional logging output above.
npm ERR! Please include the following file with any support request:
npm ERR!     /home/pi/MagicMirror/modules/MMM-PIR-Sensor/npm-debug.log

Yea it’s in the file directory ( MagicMirror/modules/MMM-PIR_Sensor )

Note from admin: Please use Markdown on code snippets for easier reading!

Medo · Jan 2, 2017, 11:39 AM

@zichao92
What i also did, was a complete reinstall of the PIR-Sensor

I followed the steps, “Banglee” described some lines above:

ok so lets go step by step:
cd ~/MagicMirror/modules/

now we will remove the PIR folder:
rm -rf MMM-PIR-Sensor

and from here, we’re going to reinstall the MMM-PIR-Sensor modul:

git clone https://github.com/paviro/MMM-PIR-Sensor.git
cd MMM-PIR-Sensor

run the following cmd here:
npm install and wait, this can take a few minutes.

Now you’ll have to add pi to gpio
sudo useradd -g pi gpio

and reboot your Raspi:
sudo reboot

Sorry, no further ideas so far (maybe you can open a PIR-Sensor troubleshooting thread)?

Note from admin: Please use Markdown on code snippets for easier reading!

zichao92 · Jan 7, 2017, 12:50 PM

Hi @Medo ,
I managed to get it working in an ugly way. Doesnt matter, it works. Thanks for your help!

jwhittaker · Jan 8, 2017, 8:01 PM

I’m having nothing but trouble with this. I’ve tried all the tips on here but still get a white screen.

@zichao92 What was the ugly way and how did you manage to get it working please?

This is the error I get:

> electron js/electron.js

>Starting MagicMirror: v2.1.0
Loading config ...
Loading module helpers ...
WARNING! Could not load config file. Starting with default configuration. Error found: Error: Could not locate the bindings file. Tried:
 → /home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/build/epoll.node
 → /home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/build/Debug/epoll.node
 → /home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/build/Release/epoll.node
 → /home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/out/Debug/epoll.node
 → /home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/Debug/epoll.node
 → /home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/out/Release/epoll.node
 → /home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/Release/epoll.node
 → /home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/build/default/epoll.node
 → /home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/compiled/6.5.0/linux/arm/epoll.node
Loading module helpers ...
App threw an error during load
Error: Could not locate the bindings file. Tried:
 → /home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/build/epoll.node
 → /home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/build/Debug/epoll.node
 → /home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/build/Release/epoll.node
 → /home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/out/Debug/epoll.node
 → /home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/Debug/epoll.node
 → /home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/out/Release/epoll.node
 → /home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/Release/epoll.node
 → /home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/build/default/epoll.node
 → /home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/compiled/6.5.0/linux/arm/epoll.node
    at bindings (/home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/bindings/bindings.js:88:9)
    at Object.<anonymous> (/home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/epoll.js:1:116)
    at Module._compile (module.js:556:32)
    at Object.Module._extensions..js (module.js:565:10)
    at Module.load (module.js:473:32)
    at tryModuleLoad (module.js:432:12)
    at Function.Module._load (module.js:424:3)
    at Module.require (module.js:483:17)
    at require (internal/module.js:20:19)
    at Object.<anonymous> (/home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/onoff/onoff.js:4:11)
Whoops! There was an uncaught exception...
{ Error: Could not locate the bindings file. Tried:
 → /home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/build/epoll.node
 → /home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/build/Debug/epoll.node
 → /home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/build/Release/epoll.node
 → /home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/out/Debug/epoll.node
 → /home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/Debug/epoll.node
 → /home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/out/Release/epoll.node
 → /home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/Release/epoll.node
 → /home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/build/default/epoll.node
 → /home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/compiled/6.5.0/linux/arm/epoll.node
    at bindings (/home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/bindings/bindings.js:88:9)
    at Object.<anonymous> (/home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/epoll.js:1:116)
    at Module._compile (module.js:556:32)
    at Object.Module._extensions..js (module.js:565:10)
    at Module.load (module.js:473:32)
    at tryModuleLoad (module.js:432:12)
    at Function.Module._load (module.js:424:3)
    at Module.require (module.js:483:17)
    at require (internal/module.js:20:19)
    at Object.<anonymous> (/home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/onoff/onoff.js:4:11)
  tries: 
   [ '/home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/build/epoll.node',
     '/home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/build/Debug/epoll.node',
     '/home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/build/Release/epoll.node',
     '/home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/out/Debug/epoll.node',
     '/home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/Debug/epoll.node',
     '/home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/out/Release/epoll.node',
     '/home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/Release/epoll.node',
     '/home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/build/default/epoll.node',
     '/home/pi/MagicMirror/modules/default/MMM-PIR-Sensor/node_modules/epoll/compiled/6.5.0/linux/arm/epoll.node' ] }
MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues
Launching application.```