MMM-MPlayer

[clakkentt]

Just a comment

I am using MagicMirror on a pi using bullseye 32bit.

When using a rpi4 everything works fine. When I transfer the sd card to a rpi3 every time the MPlayer shows a live feed the desktop taskbar shows up, when MPlayer is switching between feeds the taskbar is not visible.

This is probably due to my specific choice of settings but just thought it might help someone.

[sdetweil]

@clakkentt if you use my backup/restore to capture your MM config
and build a new card ON the pi3, and install MM and restore the config
do you see the same problem?

backup/restore here https://github.com/sdetweil/MagicMirror-backup-restore

install/upgrade here https://github.com/sdetweil/MagicMirror_scripts

[clakkentt]

@sdetweil
Yes the problem is the same. I initially had MM running on a rpi3, when I installed MMM-MPlayer, I noticed the taskbar showing every time there was a feed showing.
I started from scratch on an rpi4 and saw no problem but when I transferred the card to the rpi3 the issue came up again.

Since I wanted to keep using the rpi3 for the MagicMirror I solved the problem by making the taskbar 0 pixels in height.

[sdetweil]

@clakkentt what do you mean by taskbar?

[clakkentt]

@sdetweil

The desktop taskbar. On the raspberry the bar at the top of the screen.

[sdetweil]

@clakkentt it pops up over MagicMirror screen?

[clakkentt]

@sdetweil

Yes, when the MPlayer RTSP stream is running

[clakkentt]

@sdetweil

I don’t know if this is the cause but I am using vcgencmd to turn the display off and on and to do that I had to disable vc4-kms-v3d

[sdetweil]

@clakkentt crazy. i don’t know either

[plainbroke]

@sdetweil
Wonder what he is using for his x and y start position in MMM-MPlayer.

windowPosition: { x: 5, y: 5 },

If I remember correctly.