MMM-FRITZ-Box-Callmonitor-py3 and MMM-Callmonitor-Current-Call

xIExodusIx

Hi Ralf,
I just pushed up my reworked version of the module “MMM-FRITZ-Box-Callmonitor-py3” to github.
I hope it works for you too.

Regards
Carsten

rkorell

@xIExodusIx Dear Carsten, this is awesome!
Thanks a LOT!
Currently - in my installation - the Info Box which is signalling the call is not a „message-box“ and disappears when call is ended.
Did you modify this -then I would hesitate to install newest version…
Thanks a lot for your effort!
Warmest regards,
Ralf

xIExodusIx

@rkorell said in MMM-FRITZ-Box-Callmonitor-py3 and MMM-Callmonitor-Current-Call:

Currently - in my installation - the Info Box which is signalling the call is not a „message-box“ and disappears when call is ended.
Did you modify this -then I would hesitate to install newest version…
Thanks a lot for your effort!

Hi Ralf,
I did not change the appearance of the message-box, in the module it is an alert, I only tried to let it disappear right when you answer the incomming call, because on my MM2 the message box blurres the background and I can not clearly see all other modules and the “MMM-Current-Call” module, that also shows me if the current call is incomming or outgoing, but now the message box disappears when the incomming call is answered.
The MMM-Current-Call" module makes only sense if you have more then one telephon-line, so you can see how many people are talking right now, and if the calls are incomming or outgoing.

Hope that will help you to decide.

Regards
Carsten

rkorell

@xIExodusIx Thanks again, this helps!
Regards,
Ralf

xIExodusIx

@rkorell

I played a little bit around with the colors and changed also the appearance of missed calls, the missed calls now will be displayed in color “magenta” with a “star”. You can edit the colors by yourself by editing the “MMM-Fritz-Box-Callmonitor-py3.js” file, you can’t miss these entrys.
I also edited the README.md file again.
I will push these changes to github at my next update, but I have to test a little bit more because I have to wait for the unwanted calls that are in my blocked “phonenumber range list”, and I don’t know when these unwanted calls are incomming.
But hopefully I got most of the annoying problems under control. :-)

Regards
Carsten

rkorell

@xIExodusIx It’s good practise to keep style information not in the *.js code but in the CSS file of module - than everybody can make persistent changes to style related issues in custom.css which will not been overwritten by module updates…

Warm regards,
Ralf

xIExodusIx

@rkorell

Yes, I know, but I don’t know how to transfer this code-lines to the .css file, the code for appaerance and color were in the module.js file before I began to try to get it work. I only modified them.

The last two problems I have with the module is, to show the correct number in the callist, not “sip:myown number”, when an incomming call is blocket by the “number range list” and to hide the alert of these calls.

On these problems I still work.

Regards
Carsten

rkorell

@xIExodusIx Dear Carsten,
quick feedback for you: Just installed your newest version.
And - to my big surprise - it works like I would like to have…
I only have installed "MMM-FRITZ-Box-Callmonitor-py3 " - to be 100% clear, may there is the difference.
But with only this module incoming calls are displayed/signalled (grey’ish / white color) and the message box disappears either when the call is taken or if the caller hangs up.
This exactly is what I would like to have.
You definitely have done something magical because the initial code holds the message box until call is ended.
THANKS!!!

You ARE a coder :-)

Warmest greetings to Hamburg (as your git-account now reveals),
Ralf

For the CSS stuff - my apologies…
I cannot guide here, as well. I’ve seen your color coding in dependency from call-type.
I GUESS you can solve this with case-dependent CSS-attributes and so avoid the complete “switch”-clause.
But this is far beyond my own capabilities - may Sam (@sdetweil ) can lead through this…

Jose1701

Hi,

I`m new to magicmirror and I like the CallMonitor a lot.

Everthing works fine for me except the arrows and colours. I installed MMM-FRITZ-Box-Callmonitor-py3 and MMM-Callmonitor-Current-Call. I put the necessary information in the conifg as ou can see:

{
		module: 'MMM-Callmonitor-Current-Call',
		position: 'top_right',	// This can be any of the regions. Best results in left or right regions.
		config: {
			showDirection: "true",
			colorEnabled: "true",
		}
			
	},


{
		module: 'MMM-FRITZ-Box-Callmonitor-py3',
		position: 'bottom_right',	// This can be any of the regions. Best results in left or right regions.
		header: "Letzte Anrufe", // This is optional
		config: {
			// See 'Configuration options' for more information.
			showContactsStatus: "true",
            	  fritzIP: "192.168.178.1",
            	  showContactsStatus: "true",
            	  maximumCallDistance: "240",
                        maximumCalls: "4",
                        reloadContactsInterval: "1",
			showOutgoing: "true",
			colorEnabled: "true",
                        password: "******",
		}
	},

An idea what am I doing wrong?

Regards

Jose

rkorell

@Jose1701 Dear Jose,
you are referring to my post but may I’m the wrong person.
You may ask the developer, @xIExodusIx, too.

As I’m not knowing exactly what your problem is, I just can guess what’s going on…
from configuration perspective I do not see an issue - mine is similar.
As I wrote before I only have ‘MMM-FRITZ-Box-Callmonitor-py3’ in use, NOT ‘MMM-Callmonitor-Current-Call’,

For ‘MMM-FRITZ-Box-Callmonitor-py3’ I’m aware of some problems, but I do not know if this aligns with your problems.

do you have the right (actual) fork? in my case this was https://github.com/xIExodusIx/MMM-FRITZ-Box-Callmonitor-py3.git
I’m not sure if this is correct: In your config a username is missing. As far as I’m aware of you have to use a username/password combination - therefore I remember that I had to create a separate user for using the module.
there were some requirements for the module - some python libraries as I remember correctly. - Do you have installed them in a proper version?

This is the “guessing” version.
If you could describe the “problem” more exact or concrete may we get other ideas…

Good luck!
Regards,
Ralf