MMM-FRITZ-Box-Callmonitor-py3 and MMM-Callmonitor-Current-Call

rkorell

@xIExodusIx It’s good practise to keep style information not in the *.js code but in the CSS file of module - than everybody can make persistent changes to style related issues in custom.css which will not been overwritten by module updates…

Warm regards,
Ralf

xIExodusIx

@rkorell

Yes, I know, but I don’t know how to transfer this code-lines to the .css file, the code for appaerance and color were in the module.js file before I began to try to get it work. I only modified them.

The last two problems I have with the module is, to show the correct number in the callist, not “sip:myown number”, when an incomming call is blocket by the “number range list” and to hide the alert of these calls.

On these problems I still work.

Regards
Carsten

rkorell

@xIExodusIx Dear Carsten,
quick feedback for you: Just installed your newest version.
And - to my big surprise - it works like I would like to have…
I only have installed "MMM-FRITZ-Box-Callmonitor-py3 " - to be 100% clear, may there is the difference.
But with only this module incoming calls are displayed/signalled (grey’ish / white color) and the message box disappears either when the call is taken or if the caller hangs up.
This exactly is what I would like to have.
You definitely have done something magical because the initial code holds the message box until call is ended.
THANKS!!!

You ARE a coder :-)

Warmest greetings to Hamburg (as your git-account now reveals),
Ralf

For the CSS stuff - my apologies…
I cannot guide here, as well. I’ve seen your color coding in dependency from call-type.
I GUESS you can solve this with case-dependent CSS-attributes and so avoid the complete “switch”-clause.
But this is far beyond my own capabilities - may Sam (@sdetweil ) can lead through this…

Jose1701

Hi,

I`m new to magicmirror and I like the CallMonitor a lot.

Everthing works fine for me except the arrows and colours. I installed MMM-FRITZ-Box-Callmonitor-py3 and MMM-Callmonitor-Current-Call. I put the necessary information in the conifg as ou can see:

{
		module: 'MMM-Callmonitor-Current-Call',
		position: 'top_right',	// This can be any of the regions. Best results in left or right regions.
		config: {
			showDirection: "true",
			colorEnabled: "true",
		}
			
	},


{
		module: 'MMM-FRITZ-Box-Callmonitor-py3',
		position: 'bottom_right',	// This can be any of the regions. Best results in left or right regions.
		header: "Letzte Anrufe", // This is optional
		config: {
			// See 'Configuration options' for more information.
			showContactsStatus: "true",
            	  fritzIP: "192.168.178.1",
            	  showContactsStatus: "true",
            	  maximumCallDistance: "240",
                        maximumCalls: "4",
                        reloadContactsInterval: "1",
			showOutgoing: "true",
			colorEnabled: "true",
                        password: "******",
		}
	},

An idea what am I doing wrong?

Regards

Jose

rkorell

@Jose1701 Dear Jose,
you are referring to my post but may I’m the wrong person.
You may ask the developer, @xIExodusIx, too.

As I’m not knowing exactly what your problem is, I just can guess what’s going on…
from configuration perspective I do not see an issue - mine is similar.
As I wrote before I only have ‘MMM-FRITZ-Box-Callmonitor-py3’ in use, NOT ‘MMM-Callmonitor-Current-Call’,

For ‘MMM-FRITZ-Box-Callmonitor-py3’ I’m aware of some problems, but I do not know if this aligns with your problems.

do you have the right (actual) fork? in my case this was https://github.com/xIExodusIx/MMM-FRITZ-Box-Callmonitor-py3.git
I’m not sure if this is correct: In your config a username is missing. As far as I’m aware of you have to use a username/password combination - therefore I remember that I had to create a separate user for using the module.
there were some requirements for the module - some python libraries as I remember correctly. - Do you have installed them in a proper version?

This is the “guessing” version.
If you could describe the “problem” more exact or concrete may we get other ideas…

Good luck!
Regards,
Ralf

Jose1701

@rkorell

Hi,

sorry for the late response but I was ill and laying in bed.

I will have a look. Actually I have the following “proofed”.

@rkorell said in MMM-FRITZ-Box-Callmonitor-py3 and MMM-Callmonitor-Current-Call:

do you have the right (actual) fork? in my case this was https://github.com/xIExodusIx/MMM-FRITZ-Box-Callmonitor-py3.git

Yes, I’m using this one, too.

@rkorell said in MMM-FRITZ-Box-Callmonitor-py3 and MMM-Callmonitor-Current-Call:

I’m not sure if this is correct: In your config a username is missing. As far as I’m aware of you have to use a username/password combination - therefore I remember that I had to create a separate user for using the module.

Well, until now I didn’t need more. Everything is working fine except the arrows and colours. But I will see if sth. is needed.

@rkorell said in MMM-FRITZ-Box-Callmonitor-py3 and MMM-Callmonitor-Current-Call:

there were some requirements for the module - some python libraries as I remember correctly. - Do you have installed them in a proper version?

I think I have the right ones and up to date but I will have a look, too.

Thanks so far.

Kind regards

Jose

Jose1701

said in MMM-FRITZ-Box-Callmonitor-py3 and MMM-Callmonitor-Current-Call:

I’m not sure if this is correct: In your config a username is missing. As far as I’m aware of you have to use a username/password combination - therefore I remember that I had to create a separate user for using the module.
Well, until now I didn’t need more. Everything is working fine except the arrows and colours. But I will see if sth. is needed.

That was the reason. Don`t know it shows the calls without a password but not the arrows.

Now everything is working fine.

Thanks a greets

Jose