MagicMirror does not work at startup

[mpires]

I have the same issue, i did put java scrip on startup, i did look on the forum and #sebzx10r, suggest the same solution.

https://forum.magicmirror.builders/topic/1094/pm2-mm2-not-starting-on-start-up/15

In Raspian click Menu,Preferences,Main Menu Editor
Click Preferences and check Default applications for LXSession
Click OK and close main menu editor
Now click Menu and Under Preferences click on Default applications for LXSession
LXSession configuration opens
Click Autostart
Under Manual autostarted applications paste in your java command line
click add
close the LXSession configuration application and reboot your pi
your java app should run after reboot

Hope this help.
Cheers,

[lucallmon]

@mpires did you get it working with this script?

[mpires]

I have the script working, but the only way to start mm on boot, was set

pm2 start mm

on LXSession, but yes now once i boot my Pi, mm start without any problem.

[lucallmon]

@mpires so in the LXSession configuration menu under ‘autostart’, simply add the line ‘pm2 start mm’ and it’ll run at boot?

[lucallmon]

@mpires do I need an @ in front of it?

[mpires]

You have Pm2 install?

[lucallmon]

@mpires Yes.

[lucallmon]

@mpires That got it working. I had to add in the directory. Thanks for all your help.

[mpires]

no just put " pm2 start.sh "

[mpires]

Another happy person :D

[cassidycaid]

Thanks for the information. Using it I was able to figure out the steps for the command line.

cd ~/.config/lxsession/LXDE-pi
sudo nano autostart

add to the end

pm2 start mm.sh

Thanks again for helping.

[mpires]

@cassidycaid yup is the same, i just show visual way, because is more simple for some ppl to understand.

[amomat]

@cassidycaid Worked like a charm. Thanks a bunch.

[TheSt33v]

When I boot the pi, I see the MagicMirror boot screen, the desktop, and then MagicMirror boots. Following the steps above did not solve the problem. Is the desktop supposed to show up before MagicMirror boots, or is it supposed to go straight into MagicMirror? After I see the boot screen and right before I see the desktop, it briefly becomes a black screen with an X in the upper left corner of the screen. Any ideas on what might be wrong? I have pm2 installed and it is functioning perfectly.

[mpires]

Yes that is correct, you will always see the desktop for few seconds, then should open MM.
I think will happen the same with any other option you find to auto boot MM.