[Remote-Control] Shutdown, Configure and Update your MagicMirror

ottobot

Let me start by saying “sorry”. My brain is all over the place right now, but I had a question.

I want to make a few mirrors for friends and family and use your module to make things simpler for them since they basically only now how to facebook and snapchat on their phones.

Would it be possible to set up a simple service in raspbian that would wait for an app to request an IP from the pi. Then the pi would broadcast its IP. The app would take the IP and automagically input it into the address bar and connect to the pi so that they could shutdown the pi properly from your module?

I really couldn’t code my way out of a paper bag, but I know there are websites that can create simple apps(I’m about too look at appmakr after I send this).

Jopyth

@ottobot This is why I initially made my module display the URL on the mirror (if the module is visible). No need for an app here. The functionality itself could be refined, since it apparently does not work 100% of the time.

ottobot

@Jopyth Yeah, I figure I’ll walk them through everything over the phone once they get them. I’ll just have them make a bookmark of the page. I guess if their IP changes they’ll call me telling me the page stopped working.

janner6

This is my first download and what a module! Fantastic work so much easier to control the power to the mirror.

Mykle1

@janner6 said in [Remote-Control] Shutdown, Configure and Update your MagicMirror:

This is my first download and what a module! Fantastic work so much easier to control the power to the mirror.

A “must have” module, without a doubt. :thumbsup_tone1:

janner6

@Mykle1 recommend any other module?

Mykle1

@janner6 said in [Remote-Control] Shutdown, Configure and Update your MagicMirror:

recommend any other module?

Sure, since you’re asking. These three I could not do without

MMM-Simple-Logo - Bottom left and bottom right
MMM-Globe - Bottom middle, in between the two SimpleLogo pictures
MMM-WunderGround - Top right and top middle, under the clock

janner6

@Jopyth hi, sorry to hijack this answer but I was hoping for some advice please? When I installed the MMM-remote I left the configure URL to be displayed on the screen. Unfortunately though I can’t remove it now? Even when I deselect it from the configuration website it will not go away?

Any ideas?

yawns

@janner6
did you remove or comment the position attribute?

{
    module: 'MMM-Remote-Control'
    // uncomment the following line to show the URL of the remote control on the mirror
    // , position: 'bottom_left'
    // you can hide this module afterwards from the remote control itself
},

janner6

@yawns I totally forgot about this, thanks for the reminder. Exactly what I wanted.

Snille

@Jopyth I have lost the “Back” button on my remote see pic…
Update: Just realized I have actually lost all the “icons”… :)
I’m on the “development” branch (both on the mirror and on your module).

I have recently reinstalled my mirror (today actually) but before that it worked…
Have I missed something?

strawberry 3.141

@Snille the icons got removed on the dev branch you have to run npm install in the magicmirror directory

Snille

@strawberry-3.141 Hmm… Can’t get it to work… Even deleted the “node_modules” before doing npm install in the mm dir, then also went in to the “vendor” dir and did the same… Still no pictures in the remote… However, I do get the “fontawesome” icons on other modules (my own included) so the pictures are there. :)

strawberry 3.141

@Snille https://github.com/Jopyth/MMM-Remote-Control/blob/master/remote.html#L10 uses the old path

Snille

@strawberry-3.141 Oh! :) That’s why… Thank you.

A Former User

Hey @Jopyth,

really like your module. By now, it works really cool with the standard definition. Now I try to hide single modules and I’m not so deep into configuring it.

Would you mind, to post a minimal example of your config file with the calendar show / hide example you have posted with gifs at the top?

That would be just perfect so I can see, how it’s working.

Thanks a lot
Patrick

McSorley

Just installed it and its working a treat! Thank you.

kurt

@Jopyth
strawberry helped me a lot! to install your modul and it works fine, just starting to play around with it. to install moduls in the future without taking care about missing kommas or [ or { or making mistakes by copying scripts, is a imendous help for people like me, who is absolut new to this javascriptpythonworld.
So thanks a lot and cheers
by now everything is running fine
Kurt

AAPS

After updating MM from Remote-Control, when I rebooted I got a black screen. I realized that npm install was necessary, so everything works now. Only I thought that updating from Remote-Control would allow me to completely update without having to touch my mouse and keyboard. Is it supposed to?

Mykle1

@Jopyth
If you wouldn’t mind taking a look at this:
https://forum.magicmirror.builders/topic/2188/mmm-remote-control-stopped-working-error

I didn’t want to double post