Facial Recognition - customize your mirror for every user!

[paviro]

@Wilco89 No will do but I have so much stuff on my hand at the moment… Moving to Berlin in August etc…

[Wilco89]

@paviro wir warten noch ein Moment. Viel Spaß im Berlin.

I hope everything is going well with the move to Berlin. So everybody will be happy in a few weeks.

[xdker]

why？

^CTraceback (most recent call last):
  File "capture.py", line 35, in <module>
    capture.capture()
  File "/home/pi/MagicMirror/MMM-Facial-Recognition-Tools/facetrainer/lib/capture.py", line 53, in capture
    if is_letter_input('c'):
  File "/home/pi/MagicMirror/MMM-Facial-Recognition-Tools/facetrainer/lib/capture.py", line 23, in is_letter_input
    input_char = raw_input()
KeyboardInterrupt

---

Note from admin: Please use Markdown on shell snippets!

[xdker]

This post is deleted!

[paviro]

Looks like you terminated the process by pressing ctrl-C or strg-C, just press c and then enter and no other key with the c.

[xdker]

@paviro
Oh sorry, I’m sorry I didn’t notice.
But there are the following tips.
where is capture.pgm not in the name of the folder.

Could not detect single face!  Check the image in capture.pgm to see what was captured and try again with only one face visible.

[plumcraft]

Hi everyone,

I have the same issue.

---

What do you want to do?
[1] Capture training images from webcam
[2] Convert ‘*.jpg’ pictures from other cameras to training images
–> 1

Enter the name of the person you want to capture or convert images for.
–> olifier
Images will be placed in ./training_data/olifier

---

Starting process…

Capturing positive training images.
Type c (and press enter) to capture an image.
Press Ctrl-C to quit.

c
Capturing image…
Could not detect single face! Check the image in capture.pgm to see what was captured and try again with only one face visible.

Thanks a lot

[sarthak18593]

@plumcraft Are you using the Pi camera module or a usb webcam ?

[plumcraft]

@sarthak18593

I’m using the pi camera module. It’s correctly enable from the raspi config tool.

[plumcraft]

I’ve tried to capture an image from my pi camera with :

pi@pi:~ $ raspistill -o output.jpg

the raspistill tool hang…

The pi camera might be broken ? someone got the same issue ?

Do you have any good usb webcam compatible with raspberry pi 3 and opencv ? I would like to use the MMM Face recognition module…

Thanks