Read the statement by Michael Teeuw here.
Electron CPU usage
-
@Snille said in Electron CPU usage:
Mine is from UK it seams. :)
Here it is. It appears that mine is also from the UK. How about the other info? Does it match up to yours?
processor : 3 model name : ARMv7 Processor rev 4 (v7l) BogoMIPS : 76.80 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 Hardware : BCM2709 Revision : a02082 Serial : 0000000028d2c528 pi@Pi3:~ $ -
@Mykle1 Here is my full “list”. :)
processor : 0 model name : ARMv7 Processor rev 4 (v7l) BogoMIPS : 76.80 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 1 model name : ARMv7 Processor rev 4 (v7l) BogoMIPS : 76.80 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 2 model name : ARMv7 Processor rev 4 (v7l) BogoMIPS : 76.80 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 3 model name : ARMv7 Processor rev 4 (v7l) BogoMIPS : 76.80 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 Hardware : BCM2835 Revision : a02082 Serial : xIf you cant find it, make it and share it!
Modules: MMM-homeassistant-sensors, MMM-Modulebar, MMM-Profilepicture, MMM-Videoplayer -
-
-
My hardware is also BCM2835 revision a02082 , just like Snille. I have another micro SD I think floating around somewhere in my house, I’ll try and do a clean install of rapsian stretch lite on it tomorrow and use the auto install script on that and see how that goes. Fingers crossed I just got a crappy SD card or something.
-
@wtidwell said in Electron CPU usage:
Fingers crossed I just got a crappy SD card or something.
How did you make out? I’ve been thinking about this issue since you started the topic. I did quite a bit of googling and there are a number of instances where people had trouble (not with MM) with performance, and heat. In many cases, those people determined that their Pi’s were faulty, after much time, frustration and troubleshooting. In those cases, they had their Pi’s replaced and the problem was solved.
I hope the new SD solves your problem but I have my doubts about that. Please keep me informed and good luck.
-
@Mykle1
Well I ordered a new pi 3 on Amazon and did a fresh install it’s the same thing all over again. Every time the text changes on magic mirror it maxes out my cpu. And it’s starting to overheat as well and I didn’t even change any overclock settings.Quite infuriating honestly. I don’t know what I’ll try next.
-
@wtidwell said in Electron CPU usage:
Quite infuriating honestly. I don’t know what I’ll try next.
Oh man, that sucks. I’m sorry to hear that. I’m at a lost here. Really, there is no logical reason for that to happen
-
@Mykle1
My last ditch effort is to try a new SD card. The card it came with is a SanDisk 32gb card and it’s just a plain black card and I have this otherone which is a SanDisk ultra 32gb card so maybe that does something. -
I am certainly rooting for you! I think there was/is a walk-through on preparing the SD card, formatting and such, although I don’t remember where. It’s been a long time.
The best of luck to you. Please keep me posted
-
@Mykle1
Just to rule out one more variable: the pi 3 should be fine running at 1080p yes? -
@wtidwell said in Electron CPU usage:
Just to rule out one more variable: the pi 3 should be fine running at 1080p yes?
Here is my res on an old HP monitor. That’s using the DVI interface. It does not have HDMI.
-
@wtidwell Yeah I don’t use those plain black sd cards I buy the more expensive ones because of the issues.
-
@wtidwell said in Electron CPU usage:
I have this otherone which is a SanDisk ultra 32gb card so maybe that does something.
I looked to see what SD card is in my Pi but all I could come up with is the wrapper it came in. I bought one of those CanaKit’s with everything included. I don’t want to take my mirror down if I don’t have to, sorry.
-
I’m beginning to think it’s the SD card. I did a clean install of Raspian on the SanDisk ultra which is the same class (u1) as the other card which was plain black and it seemed like it was a twinge better but not fantastic. Thanks for your input cowboysdude.
I ordered a SanDisk extreme u3 which will get here tomorrow and try that and report back in. Don’t take your mirror down haha
-
@wtidwell said in Electron CPU usage:
I’m beginning to think it’s the SD card.
I hope that’s it. Then we can all laugh about it. Keep me posted.
Just in case:
https://www.raspberrypi.org/documentation/installation/installing-images/And:
HOW TO FORMAT AN SD CARD AS FAT Note: If you're formatting an SD (or micro SD) card that has a capacity over 32GB (i.e. 64GB and above), then see the separate SDXC formatting instructions. WINDOWS For Windows users we recommend formatting your SD card using the SD Association's Formatting Tool, which can be downloaded from sdcard.org. You will need to set "FORMAT SIZE ADJUSTMENT" option to "ON" in the "Options" menu to ensure that the entire SD card volume is formatted, and not just a single partition. The updated size will be shown after the format is complete. MAC OS The SD Association's Formatting Tool is also available for Mac users, although the default OS X Disk Utility is also capable of formatting the entire disk. To do this, select the SD card volume and choose Erase with MS-DOS format. LINUX For Linux users we recommend gparted (or the command line version parted). Norman Dunbar has written up instructions for Linux users. -
Ok, this is the kit I bought back in January. I checked my amazon.com history.
“You purchased this item on January 16, 2017”
https://www.amazon.com/CanaKit-Raspberry-Complete-Starter-Kit/dp/B01C6Q2GSY/ref=sr_1_1?s=electronics&ie=UTF8&qid=1503626951&sr=1-1&keywords=32+GB+Micro+SD+Card+(Class+10)+pre-loaded+with+NOOBSSo this is the SD card I have in my Pi3-B mirror. Recommended Micro SD Card pre-loaded with NOOBS
That is also where I installed my Raspbian Jessie from. You can install it from NOOBS
-
Well I just installed everything on a brand new SanDisk extreme u3 MicroSD. And it’s still using all my dang cpu and the transitions are still so laggy.
I think I’ve tried everything at this point.
-
-
@Mykle1
Is there anything to do after using the install script? Am I missing some next step?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login