My bathroom smart mirror.

[qu1que]

Hi!

First of all I would like to thanks to @goldjunge_chriz for the opportunity to acquire a 2-way mirror. It is impressive, much better than the acrylic sheet. And, I’d like to thanks to @MichMich too for the Magic Mirror software.

Here I leave some pictures of the montage that I was doing this last summer, at leisure. I have been quite happy with the result. I hope you like it!

I am going to try not to extend myself too much with the explanations, if someone has any doubts, I will kindly answer him.

---

The bathroom cabinet consists of 2 pieces: a frame and a door:

---

A coat of paint…

---

The screen of a second-hand 24-inch LCD TV

---

To correct these errors in the cut with the electric saw, I have put some plastic corners and black silicone. This is the result:

---

E.L. wire installation:

---

Mirror installation:

The mirror was glued with black silicone too

---

Preparation of the electrical wiring in the frame…

… and the TV speakers. I designed a simple piece in 3D to put them inside (they are available in thingiverse in case someone is interested).

---

Final assembly:

Detail of Raspberry Pi 3B

---

Last adjustments and … It works !!!

---

I have made a pdf with the connection scheme of all the electronic part that you can see here (I’ve had to convert to png previously to put it here):

And here is the python3 script to make it all works:

#!/usr/bin/python3
# Para que funcione correctamente, hay que instalar los siguientes
# paquetes:   sudo apt install python3 python3-rpi.gpio

# Script que activa la pantalla y el EL wire cuando detecta movimiento
# a través del sensor de presencia PIR

import RPi.GPIO as GPIO
import time
import os

GPIO.setmode(GPIO.BCM)
GPIO.setup(22, GPIO.IN)						# SALIDA DEL PIR (PIR OUTPUT)
GPIO.setup(23, GPIO.OUT)					# EL WIRE (CABLE ELECTROLUMINISCENTE)
GPIO.setwarnings(False)

time.sleep(120)
os.system('vcgencmd display_power 0')

while True:
    if (GPIO.input(22) == 1):		                # SI DETECTA PRESENCIA (IF MOTION IS DETECTED)
        os.system('ogg123 -qz /media/pi/MUSICA/ &')	# ACTIVA LA MÚSICA (TURN MUSIC ON)
        os.system('vcgencmd display_power 1')	        # ACTIVA HDMI --> ACTIVA PANTALLA (TURN ON SCREEN)
        GPIO.output(23, GPIO.HIGH)			# ENCIENDE EL ELWIRE (TURN ON EL WIRE)
        time.sleep(600)					# "DUERME" 10 MINUTOS (SLEEP 10 MINUTES)
        os.system('vcgencmd display_power 0')		# APAGA SALIDA HDMI --> APAGA PANTALLA (TURN OFF SCREEN)
        GPIO.output(23, GPIO.LOW)			# APAGA EL WIRE (TURN OFF EL WIRE)
        os.system('sudo pkill ogg123')			# MATA PROCESO MÚSICA (TURN OFF MUSIC)

And you can watch a video here:

https://www.youtube.com/watch?v=WOjyTtQLJ6w

---

I hope you like it as much as I do!!

So far I have not managed to make the music stop when the push button is pressed, but I will end up getting it …

[Mykle1]

@qu1que

Good stuff!

[CyruS1337]

Looks really great. Thanks for the documentation and the review