My 42" multitouch Philips MagicMirror Display

Mykle1

@M1K3rSz

Fantastic! Let me know how it goes. :-)

Cyberdale008

Looks very nice!! Interested how your touch screen works out.

emlowe

Hello-Lucy is unlikely to work well on an rpi though, correct? At least this is my understanding…

Mykle1

@emlowe said in My 42" multitouch Philips MagicMirror Display:

Hello-Lucy is unlikely to work well on an rpi though, correct? At least this is my understanding…

It will work . . . with some latency. Depends on what you consider an adequate response time. You can NOT use the animated face. This will certainly bring the Pi to a halt. :-/

viren_nitin

Heey @M1K3rSz ik heb een vraagje, ik kom zelf ook uit Den Haag en ik probeer bustimes op mijn MM2 te zetten, alleen lukt het me niet. Ik kan de timepointcode niet vinden voor tram 12 richting Duindorp. Kan jij me misschien verder helpen?

cirdan

@viren_nitin just request http://v0.ovapi.nl/line/HTM_12_2 in your browser and search the resulting json with search on a page for TimingPointName for the stop you want to use. E.g I find Tholensestraat. The next field is the tpc

TimingPointName":"Tholensestraat","TimingPointCode":"32000806"

Good luck

Mykle1

@viren_nitin said in My 42" multitouch Philips MagicMirror Display:

Heey @M1K3rSz ik heb een vraagje, ik kom zelf ook uit Den Haag en ik probeer bustimes op mijn MM2 te zetten, alleen lukt het me niet. Ik kan de timepointcode niet vinden voor tram 12 richting Duindorp. Kan jij me misschien verder helpen?

I’m going to assume that cirdan (The Shipwright) has helped you without going to my translator. :-)

M1K3rSz

This post is deleted!

M1K3rSz

@cirdan said in My 42" multitouch Philips MagicMirror Display:

@viren_nitin just request http://v0.ovapi.nl/line/HTM_12_2 in your browser and search the resulting json with search on a page for TimingPointName for the stop you want to use. E.g I find Tholensestraat. The next field is the tpc
TimingPointName":"Tholensestraat","TimingPointCode":"32000806"
Good luck

Sorry , ik was een paar daagjes buiten de stad !
dus zie je vraag te laat, neem aan dat cirdan je uit de brand heeft geholpen

PaulB

Dear @M1K3rSz , your LED’s look pretty cool. Did they come with your monitor or did you installed it after you bought your screen? Furthermore I would like to know what they are there fore? Screen activisation ore even showing you which component is not working correctly?

Thanks in advantage for your answer :)

Kind regards from Hamburg, Germany,
Paul