[MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras

[shbatm]

@cr4z33 Can you please post (or send in chats) your current config. I’m curious if we’re missing something obvious.

@evroom I’m sorry you can’t get it working again. I’m at a loss as to why it’s not starting the streams properly. Everything in your config you sent looks like it should be working from the module’s end. The only thing I can think of is something else is interfering and preventing the module from starting. (Would show up as a “MMM-RTSPStream is suspended…” in the DevTools (web browser) console logs.

[anthony6608]

@evroom I’m sorry but I haven’t read too far back in the posts but have you tried disabling your other modules to determine if there’s a conflict somewhere?

The reason I ask is because shbatm helped me recently with everything setup correctly but stream not displaying. One of the issues turned out to be the GoogleMapsTraffic module. Just wanted to mention that just in case. Good luck!

[Cr4z33]

@shbatm here you go. :slightly_smiling_face:

config.js

[costascontis]

hi ,trying to use this module to watch an ip cam.After i start MM i get in the log:

Starting stream stream1 with args: [
    "--avdict",
    "rtsp_transport:tcp",
    "--win",
    "738, 63, 1090, 305",
    "--live",
    "--video_queue",
    "4",
    "--fps",
    "30",
    "rtsp://admin:@192.168.1.108:554/12?"
]
error: object file .git/objects/0a/340d5d575f5675a19c2108bb1acc9f20576259 is empty
error: object file .git/objects/0a/340d5d575f5675a19c2108bb1acc9f20576259 is empty
fatal: loose object 0a340d5d575f5675a19c2108bb1acc9f20576259 (stored in .git/objects/0a/340d5d575f5675a19c2108bb1acc9f20576259) is corrupt
fatal: The remote end hung up unexpectedly

Starting PM2 for omx_stream1
PM2 started for omx_stream1

when i press pause and play again i get:

Stopping stream stream1
Stopping PM2 process: omx_stream1
Starting stream stream1 with args: [
    "--avdict",
    "rtsp_transport:tcp",
    "--win",
    "738, 63, 1090, 305",
    "--live",
    "--video_queue",
    "4",
    "--fps",
    "30",
    "rtsp://admin:@192.168.1.108:554/12?"
]
Starting PM2 for omx_stream1
PM2 started for omx_stream1

I just get a blank screen.Steam is working nice with vlc,its the second low res stream of this camera.
config:

    module: "MMM-RTSPStream",
    position: "top_center",
    config: {
        autoStart: true,
        rotateStreams: true,
        rotateStreamTimeout: 10,
        moduleWidth: 354,
        moduleHeight: 240,
        localPlayer: 'omxplayer',
        remotePlayer: 'none',
        showSnapWhenPaused: false,
        remoteSnaps: false,
        stream1: {
            name: 'bibicam',
            url: 'rtsp://admin:@192.168.1.108:554/12?',
            frameRate: undefined,
            width: undefined,
            height: undefined,
            },
        }
}

any ideas?

[shbatm]

For the first one:

@costascontis said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

error: object file .git/objects/0a/340d5d575f5675a19c2108bb1acc9f20576259 is empty

That’s a new one by me… maybe time for Google on that one.

For the blank screen: watch all of the PM2 logs (pm2 logs command) and see if you see something like this:

1|omx_stre | * failed to add service - already in use?
1|omx_stre | /usr/bin/omxplayer: line 67: 15281 Aborted (core dumped) 

If you do, you probably have the latest version of Raspbian with the OpenGL driver enabled in raspi-config– omxplayer isn’t working properly with the OpenGL driver enabled, if you want to use omxplayer, you’ll have to enable the legacy driver: https://www.raspberrypi.org/forums/viewtopic.php?t=204794

If you see anything else in the PM2 logs, let me know.

[costascontis]

i tested the bunny rtsp and another camera that output a “rtsp://ipcamera:554/ch0.h264” link and both work,so i think the camera i want to use that output the “rtsp://ipcamera:554/12” link has a problem with omxplayer.I will look at pm2 logs and i ll get back to you,thanx
edit : the links that worked for me did not auto started but i had to press pause and play again.

pm2 log :

/home/pi/.pm2/logs/mm-out.log last 15 lines:
0|mm       | Starting stream stream1 with args: [
0|mm       |     "--avdict",
0|mm       |     "rtsp_transport:tcp",
0|mm       |     "--win",
0|mm       |     "738, 63, 1090, 305",
0|mm       |     "--live",
0|mm       |     "--video_queue",
0|mm       |     "4",
0|mm       |     "--fps",
0|mm       |     "30",
0|mm       |     "rtsp://admin:@192.168.1.108/12.h264"
0|mm       | ]
0|mm       | PM2: omx_stream1 already running. Stopping old instance...
0|mm       | Starting PM2 for omx_stream1
0|mm       | PM2 started for omx_stream1

i see no error but no streaming,only the name of the cam and black screen…

[djuscha]

I found that on my troubleshooting on the internet maybe that helps us?

RTSP-Stream-Viewer

[shbatm]

@costascontis said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

i tested the bunny rtsp and another camera that output a “rtsp://ipcamera:554/ch0.h264” link and both work,so i think the camera i want to use that output the “rtsp://ipcamera:554/12” link has a problem with omxplayer.I will look at pm2 logs and i ll get back to you,thanx
edit : the links that worked for me did not auto started but i had to press pause and play again.

pm2 log :

/home/pi/.pm2/logs/mm-out.log last 15 lines:
0|mm       | Starting stream stream1 with args: [
0|mm       |     "--avdict",
0|mm       |     "rtsp_transport:tcp",
0|mm       |     "--win",
0|mm       |     "738, 63, 1090, 305",
0|mm       |     "--live",
0|mm       |     "--video_queue",
0|mm       |     "4",
0|mm       |     "--fps",
0|mm       |     "30",
0|mm       |     "rtsp://admin:@192.168.1.108/12.h264"
0|mm       | ]
0|mm       | PM2: omx_stream1 already running. Stopping old instance...
0|mm       | Starting PM2 for omx_stream1
0|mm       | PM2 started for omx_stream1

i see no error but no streaming,only the name of the cam and black screen…

Looks like you’re using an older version of the module based on the log. Try pulling the new version and switching to the develop branch… you should see the full omxplayer command line output to the logs, which you can use to test your camera outside of MM and the module.

[swvalenti]

Updated to dev branch and use rotate streams true (3) and after 3 hours it completely locks up my entire RPi and I have to pull the plug and disable same. Seems like it is too much on CPU to keep starting/stopping OMX every 15 seconds to cause the crash? Single stream average RPi temp is 128f but when rotate is on it jumps to 160f. Maybe thats the issue?

[shbatm]

@swvalenti That could be. OMX player doesn’t switch very easily. VLC switching was working well on the newest version of Rasbian with OpenGL (Fake KMS) enabled.