Read the statement by Michael Teeuw here.
Glossy or Non-Glossy Display
-
Thanks for your answer.
Yes, the brightness is the issue. As i could see the non-glossy Displays are brighter. Maybe with the glossy Displays i would have less ghosting, but then the mirror would be darker.
After everything i read, i decided to try an other glas, the Mirastar with just 3% transmission. So i wont change the Display now.
I will post photos when its here. -
Before you get too wrapped up in switching displays or glass, be sure to lower the brightness on your display and up the contrast. That should lower the amount of background illumination but make the content pop out a bit.
-
I allready did.
I have only 40x30 Mirror. So the glas isnt that expensive and the first display was a gift. Till now, the Mirror wasnt that expensive ^^ -
@thedk It’s also very important to have no light coming to the glass from behind. However your setup is, make sure that it is as dark as possible behind the glass.
-
Yes. I made a black Frame between the display and the frame of the mirror.
I’ll post a picture later. -
Today the MIRASTAR glas came.
Had a look again at the Display. Its a glossy one. Always thought its a non glossy. Maybe i will change this.Here ist the different between the glas:
MIRROPANE
Without light
MIRASTAR
Without light
-
@thedk said in Glossy or Non-Glossy Display:
Picture Upload doesnt work
This happens to me if the picture is too high in resolution. Try making it smaller maybe
-
Uploaded again. A lil bit big, but have a look.
-
@thedk So what’s your conclusion?
It’s difficult to really see the difference from the pictures.
And what types of Mirastar and Mirropane have you chosen and where have you bought them (I’m from germany as well) -
Bought at Brigla-shop.de. Cheapest shop i found.
Both are 4mm glas. The Mirastar is way darker, looks like you cant see everything when i have the light on. But you can see everything and, very imporant for me, you cant see the Display anymore.
