[MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras

[jngo]

@costascontis
You can use the command
pm2 status
to check if it’s working.
Also, in the config.js file, you need to specify the omxplayer instead of vlc
localPlayer: ‘omxplayer’,

[evroom]

@costascontis said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

how can i test with omxplayer that my camera link is playing ok?

You can test it standalone with:

$ omxplayer --avdict rtsp_transport:tcp --live --video_queue 4 --fps 30 --win "0 0 640 360" rtsp://[rrtsp_uri]

PS

Now the coordinates confuse me, but make sense (X-axis, Y-axis)

—win x1,   y1 , x2,   y2
—win 0,    0,   640,  360

Size of video stream:
(x2 - x1) x (y2 - y1) =  640 x 360

[evroom]

@jngo said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

the “-win” is now “1127, 512, 1767, 872”

Could you briefly test it with width and height commented out ?

//  width: 352px; /* Video width + 2*border + 2*padding */
//  height: 242px;

Just to see what is happening then.

[evroom]

@jngo said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

Any idea how I can move the video feed to fit the red border frame and, do not cover the complimentary wordings?

I would try this:

Change the config.js:

:
:
moduleWidth: 468,
moduleHeight: 253,
:
:
        width: 450,
        height: 253,

Change the MMM-RTSPStream.css:

width: 468px; /* Video width + 2*border + 2*padding */
height: 253px;

[jngo]

@evroom said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

@jngo said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

Any idea how I can move the video feed to fit the red border frame and, do not cover the complimentary wordings?

I would try this:

Change the config.js:

:
:
moduleWidth: 468,
moduleHeight: 253,
:
:
        width: 450,
        height: 253,

Change the MMM-RTSPStream.css:

width: 468px; /* Video width + 2*border + 2*padding */
height: 253px;

So I followed what you recommended: width 468 and height 253. The result is still the same: The red border frame is perfectly aligned with the right size of the screen (in bottom-right setup). But the live video stream window (468x253) is located more to the “left” and higher than the red frame
This thing really drives me nuts…gr.gr…gr…

[evroom]

@jngo
So if the video area matches the module area (the red border in this moment) then it is okay for you?

Could you still till try this?

„Could you briefly test it with width and height commented out ?“

[jngo]

@evroom
I tried to comment out the W & H, it still did the same issue. I restart the Raspberry and re-install the module, it gets better a bit: Now the right-edge of the stream video is aligned with the weather module, which is what I want to. However, the stream module is still off compare to the red border frame. But I guess it is the best it could get so I set the border to “0” (no border any more). And it is now the closest that I could get!

One last thing I want to ask you as well: How do I increase the size of the fonts used in the MM? Which lines of code in the “main.css” of the MagicMirror should I look at? My purpose is I want to make the text in the clock, weather, calendar appear bigger a little bit so that we can all see those info from a few feet away.

Thank you very much for your patience and helps, I really appreciated it.

[evroom]

@jngo said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

tried to comment out the W & H, it still did the same issue.

Actually I was interested in the --win coordinates from the pm2 log in this case.
If the same, then it means that uncommented is right and the values are being taken from the config.js parameters.
It looks it can be uncommented.

One last suggestion:

Either in the MM-RTSPStream.css or your /home/pi/MagicMirror/css/custom.css:

.MMM-RTSPStream .innerWrapper {
  position: relative;
  width: 468px; /* Video width + 18px
  height: 253px;
  border-style: none;
  display: inline-block;
  text-align: center;
}

Regarding

How do I increase the size of the fonts used in the MM?
you will have to ask this in a separate topic.
Best is to change things in the custom.css.
I only made changes regarding the width of some regions.

[Duh3c]

This post is deleted!

[benpoe]

Some tips/improvements.

I’ve disabled the sound in the omx-stream by adding the arguments “-n”,“-1”, in the node_helper.js

 payload.forEach(s => {
            var args = ["--live", "--video_queue", "4", "--fps", "30","-n","-1",
                this.config[s.name].url
            ];

I had problems with the omx-streams (i have three) not restarting correctly. So instead of stopping the processes and then starting, i’ve changed the command to restart.

                for (var proc in list) {
                    if ("name" in list[proc] && namesM.indexOf(list[proc].name) > -1) {
                        if ("status" in list[proc].pm2_env && list[proc].pm2_env.status === "online") {
                            console.log(`PM2: ${list[proc].name} already running. Stopping old instance...`);
//                            pm2.stop(list[proc].name, errCB);
                            pm2.restart(list[proc].name, errCB);
                        }
                    }
                }