Hello-Lucy Module Microphone not working

[sdetweil]

@TheGeekfather use lsusb and arecord -l to get the device id for the config

[TheGeekfather]

@sdetweil

Sam,

Bus 001 Device 003: ID 0d8c:0014 C-Media Electronics, Inc. Audio Adapter (Unitek Y-247A)

card 1: Device [USB Audio Device], device 0: USB Audio [USB Audio]

[sdetweil]

@TheGeekfather said in Hello-Lucy Module Microphone not working:

“displays mic flashing symbol and just says initialising and “undefined” underneath microphone icon”

but that is ok… if u speak does it change to Voice?

the config should say microphone: “plughw:1,0”

right?

[TheGeekfather]

@sdetweil

Hi Sam, is that the config.txt in boot?

[sdetweil]

@TheGeekfather no… in the MagicMirror/config/config.js for the HelloLucy module config section

it is set to

microphone: “default”,

in the code…

if u do arecord test.wav
does it work? (this uses the default)

[TheGeekfather]

@sdetweil

{
		disabled: false,
		module: "Hello-Lucy",
		position: "bottom_left",
		config: {
  			keyword: 'HELLO LUCY',               // MUST BE CAPITALS to make Lucy start listening
  			timeout: 15,                        // timeout listening for a command/sentence
  			defaultOnStartup: 'Hello-Lucy',
  			standByMethod: 'DPMS',              // 'DPMS' = anything else than RPi or 'PI'
  			sounds: ["1.mp3", "11.mp3"],        // welcome sound at startup. Add several for a random choice of welcome sound
  			confirmationSound: "ding.mp3",

This is my config for Lucy

[sdetweil]

@TheGeekfather right, it is using ‘default’, and I asked u to test if default worked

[TheGeekfather]

@sdetweil

It works outside of MagicMirror

Not sure where I put in Microphone id or microphone default

Retired teacher still trying to learn. Got lots of the modules working but having trouble with voice commands

:)

[sdetweil]

@TheGeekfather said in Hello-Lucy Module Microphone not working:

having trouble with voice commands

ahmen… everyone has trouble…

so, did the arecord command work?

[TheGeekfather]

@sdetweil

arecord works in terminal. when Lucy module loads - under mic icon it says “undefined”