Read the statement by Michael Teeuw here.
Hello-Lucy Module Microphone not working
-
Sam,
Bus 001 Device 003: ID 0d8c:0014 C-Media Electronics, Inc. Audio Adapter (Unitek Y-247A)
card 1: Device [USB Audio Device], device 0: USB Audio [USB Audio]
-
@TheGeekfather said in Hello-Lucy Module Microphone not working:
“displays mic flashing symbol and just says initialising and “undefined” underneath microphone icon”
but that is ok… if u speak does it change to Voice?
the config should say microphone: “plughw:1,0”
right?
-
Hi Sam, is that the config.txt in boot?
-
@TheGeekfather no… in the MagicMirror/config/config.js for the HelloLucy module config section
it is set to
microphone: “default”,
in the code…
if u do arecord test.wav
does it work? (this uses the default) -
{ disabled: false, module: "Hello-Lucy", position: "bottom_left", config: { keyword: 'HELLO LUCY', // MUST BE CAPITALS to make Lucy start listening timeout: 15, // timeout listening for a command/sentence defaultOnStartup: 'Hello-Lucy', standByMethod: 'DPMS', // 'DPMS' = anything else than RPi or 'PI' sounds: ["1.mp3", "11.mp3"], // welcome sound at startup. Add several for a random choice of welcome sound confirmationSound: "ding.mp3",This is my config for Lucy
-
@TheGeekfather right, it is using ‘default’, and I asked u to test if default worked
-
It works outside of MagicMirror
Not sure where I put in Microphone id or microphone default
Retired teacher still trying to learn. Got lots of the modules working but having trouble with voice commands
:)
-
@TheGeekfather said in Hello-Lucy Module Microphone not working:
having trouble with voice commands
ahmen… everyone has trouble…
so, did the arecord command work?
-
arecord works in terminal. when Lucy module loads - under mic icon it says “undefined”
-
Hi Sam
Looks like the problem is with the install
"My apologies, gentlemen. There is a problem with the mic upon install that seems to be specific to the Pi. @cowboysdude did an install late last night and he encountered the same issue, so forgive me. I am looking at it right now and will not sleep until it is resolved. Not!
Seriously, it will be fixed ASAP.
Thank you for your patience and interest."
-
I have the same problem. Do you have the solution for this issue? Pleas, let me now.
-
Have you run
arecord -lin the terminal? (that’s a lower case L)Post your output from that command here.
My output:
pop@e8300:~$ arecord -l **** List of CAPTURE Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC221 Analog [ALC221 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 2: ALC221 Alt Analog [ALC221 Alt Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 pop@e8300:~$ -
@Mykle1
Here is my micro output:arecord -l **** Liste der Hardware-Geräte (CAPTURE) **** Karte 2: AK5371 [AK5371], Gerät 0: USB Audio [USB Audio] Sub-Geräte: 0/1 Sub-Gerät #0: subdevice #0and my speaker (I use the screen speaker):
aplay -l **** Liste der Hardware-Geräte (PLAYBACK) **** Karte 0: ALSA [bcm2835 ALSA], Gerät 0: bcm2835 ALSA [bcm2835 ALSA] Sub-Geräte: 7/7 Sub-Gerät #0: subdevice #0 Sub-Gerät #1: subdevice #1 Sub-Gerät #2: subdevice #2 Sub-Gerät #3: subdevice #3 Sub-Gerät #4: subdevice #4 Sub-Gerät #5: subdevice #5 Sub-Gerät #6: subdevice #6 Karte 0: ALSA [bcm2835 ALSA], Gerät 1: bcm2835 IEC958/HDMI [bcm2835 IEC958/HDMI] Sub-Geräte: 1/1 Sub-Gerät #0: subdevice #0 Karte 0: ALSA [bcm2835 ALSA], Gerät 2: bcm2835 IEC958/HDMI1 [bcm2835 IEC958/HDMI1] Sub-Geräte: 1/1 Sub-Gerät #0: subdevice #0 Karte 1: vc4hdmi [vc4-hdmi], Gerät 0: MAI PCM vc4-hdmi-hifi-0 [MAI PCM vc4-hdmi-hifi-0] Sub-Geräte: 1/1 Sub-Gerät #0: subdevice #0I have a USB Mic and I hope that’s not the problem, because I read a bit in this forum, that sometimes USB Micros have trouble with Hello-Lucy. I also changed my /.asoundrc file so that the speaker and microphone worked as they should. In the tests everything still worked. Here is my /.asoundrc file:
pcm.!default { type asym playback.pcm { type plug slave.pcm "hw:0,1" } capture.pcm { type plug slave.pcm "hw:2,0" } }Maybe It’s a npm problem, because at the end of the installation of the module these npm warnings came:
Note: First I make the sound configuration and only after that I install the module.npm WARN deprecated request@2.88.2: request has been deprecated, see https://github.com/request/request/issues/3142 npm WARN deprecated browserslist@1.7.7: Browserslist 2 could fail on reading Browserslist >3.0 config used in other tools. npm WARN deprecated circular-json@0.3.3: CircularJSON is in maintenance only, flatted is its successor. npm notice created a lockfile as package-lock.json. You should commit this file. npm WARN eslint-config-airbnb-base@11.3.2 requires a peer of eslint@^3.19.0 || ^4.5.0 but none is installed. You must install peer dependencies yourself. npm WARN acorn-jsx@5.2.0 requires a peer of acorn@^6.0.0 || ^7.0.0 but none is installed. You must install peer dependencies yourself.I’m glad if you can help me:)
-
I don’t think it’s npm. Those are just warnings and won’t affect the module.
USB microphone will work but it does introduce some latency.
If you run
arecord test.wavin a terminal window does it record a sound file?So, based on the info you gave me your config entry for the microphone should be
microphone: "2,0",Please try that
Then post your entire Hello-Lucy config entry so I can see it
-
{ disabled: false, module: "Hello-Lucy", position: "top_center", config: { keyword: 'HELLO LUCY', // keyword to activate listening for a command/sentence timeout: 15, // timeout listening for a command/sentence standByMethod: 'DPMS', // 'DPMS' = anything else than RPi or 'PI' microphone: "2,0", // run "arecord -l" card # and device # mine is "0,0" sounds: ["1.mp3", "11.mp3"], // welcome sound at startup. Add several for a random greetings confirmationSound: "ding.mp3", // name and extension of sound file startHideAll: false, // All modules start as hidden EXCEPT PAGE ONE // *** Page One is your default startup page *** This overrides startHideAll: true, pageOneModules: ["Hello-Lucy", ], // default modules to show on page one/startup pageTwoModules: ["Hello-Lucy",], // modules to show on page two pageThreeModules: ["Hello-Lucy",], // modules to show on page three pageFourModules: ["Hello-Lucy", ], // modules to show on page four pageFiveModules: ["Hello-Lucy", ], // modules to show on page five pageSixModules: ["Hello-Lucy", ], // modules to show on page six pageSevenModules: ["Hello-Lucy", ], // modules to show on page seven pageEightModules: ["Hello-Lucy", ], // modules to show on page eight pageNineModules: ["Hello-Lucy", ], // modules to show on page nine pageTenModules: ["Hello-Lucy", ] // modules to show on page ten } },I don’t know what else I can do.
-
You tried to run it? What was the result?
If you run
arecord test.wavin a terminal window does it record a sound file? -
Your config entry is fine. I just tried it with my microphone setting and it works fine
-
Yes I tried it to run, but lucy say only “Hello Michael, what would you like to see” and on the top of the Mirror is a crossed-out green flashing microphone and “Command Please:”.
-
OK, the module is loading. That’s good.
If you run
arecord test.wavin a terminal window does it record a sound file? -
@Mykle1 said in Hello-Lucy Module Microphone not working:
arecord test.wav
No it doesn’t work , there is yet the error “arecord: main:828:…”. I just noticed that my USB micro is now suddenly displayed as card 1. I change yet my /.asoundrc file again. Do I have to download the module again?
Thank you for you fast replays.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login