MMM-voice

[plumcraft]

Hello,

I’m trying the MMM-voice but no luck for now.

I got “Error” on the Magic mirror and i have the following error in the debug.log :

INFO: continuous.c(295): Specify ‘-infile <file.wav>’ to recognize from file or ‘-inmic yes’ to recognize from microphone.
ERROR: “cmd_ln.c”, line 641: Duplicate argument name in arguments: -adcdev
ERROR: “cmd_ln.c”, line 704: Failed to parse arguments list
INFO: continuous.c(295): Specify ‘-infile <file.wav>’ to recognize from file or ‘-inmic yes’ to recognize from microphone.

And got “12712712712712712712712711111111111111111111” in error.log

I already tried couple of things :

• reinstall the module by deleting the node_modules folder and rerun the dependencies.sh script.
• upgrade everything with apt-get upgrade
• Configure the usb microphone by creating .asound.rc file

I’m using a standart usb microphone (http://www.banggood.com/fr/USB-Microphone-For-Raspberry-Pi-p-993726.html)

I’ve found couple of differents versions how to setup an usb microphone on a RPI3 but no luck either to have a clear sound when i’m recording wav file to test it with following command :

• arecord -D plughw:1,0 test_mic.wav

Is there a excellent microphone for RPI3 ?

Really looking forward to use this module.

Thanks for your help

[plumcraft]

With @strawberry-3-141 help, thanks again by the way, it’s working now :)

If you got the same issue, here the solution :

• delete the node_modules folder and then rerun the installer.
• remove the words.json file on root module folder and restart the magic mirror.
  (It’s going to be regenerated when the module starts)

That should be it.

[witschi87]

Hey guys,

i’ve installed the plugin but getting this error:

pocketsphinx_continuous: error while loading shared libraries: libpocketsphinx.so.3: cannot open shared object file: No such file or directory

Any suggestions?

[bhepler]

@witschi87 Did you follow the installation instructions in the module’s readme.md file? Because it sure looks like you do not have PocketSphinx installed.

[iMAGiC]

finally got it work… due to command behavior, all set, but don’t know how it works.
@strawberry-3-141 is it possible that you could spend time to build a simple music player for MMM-voice module?
all I need is random play mp3 in a folder, no need to select, just play and stop is OK via voice command.
thanks in advance.

[strawberry 3.141]

We could get Around the issue of @witschi87 but we dont know yet what the problem actually is. When he starts his mirror with DISPLAY=:0 nohup npm start & it works, with pm2 start mm not, but i have seen a couple using it with pm2 already

@iMAGiC sry I my Time is pretty Limited due to my Bachelor thesis, but i will have a look if i can adjust the Existent Music player to Voice commands easily

[gismo2006]

Hi,

Some time ago @tyho help me a lot to to use voice commands in the module “Simple music Player” So I can use Start Stop Forward and back. I know in my case snoword hotword Detection was use but maybe it can help. If it was ok for @tyho I can post the code.

Maybe it will be an option for the first time, till @strawberry-3-141 have more time. :-)

Greets gismo

[DirkS]

Hi, in my case it does not stop blinking and only shows “initialisiere…”

I tried

    config: {
         microphone: 1,

and

   config: {
         microphone: '1',

but no effect.

[iMAGiC]

@DirkS please say " magic mirror" at the first. when it flashing say “voice”, when it changes to Voice mode, you can say command.

[DirkS]

@iMAGiC i tried that many times. But i changed the word to Jarvis.

Now the status is just ERROR :(