updated installer script available for testing

[swvalenti]

@sdetweil that is correct, can I somehow delete this node process as I don’t even use that module anymore?

[sdetweil]

@swvalenti yes, somehow… I don’t know how it got added…

can u do a

pm2 status

[swvalenti]

@sdetweil

pi@raspberrypi:~ $ pm2 status
┌─────────────┬────┬───────┬────────┬─────────┬─────┬────────┬───────────┐
│ Name        │ id │ mode  │ status │ ↺       │ cpu │ memory │
├─────────────┼────┼───────┼────────┼─────────┼─────┼────────┼───────────┤
│ mm          │ 1  │ N/A   │ fork   │ stopped │ 176 │ 0%     │ 0 B       │
│ omx_stream1 │ 2  │ N/A   │ fork   │ stopped │ 61  │ 0%     │ 0 B       │
│ omx_stream2 │ 3  │ N/A   │ fork   │ stopped │ 0   │ 0%     │ 0 B       │
│ omx_stream3 │ 4  │ N/A   │ fork   │ stopped │ 0   │ 0%     │ 0 B       │
│ server      │ 0  │ 1.6.5 │ fork   │ online  │ 3   │ 0.4%   │ 40.0 MB   │
└─────────────┴────┴───────┴────────┴─────────┴─────┴────────┴───────────┘
 Use `pm2 show <id|name>` to get more details about an app
pi@raspberrypi:~ $ 

[sdetweil]

@swvalenti i would guess server

pm2 stop server

[swvalenti]

@sdetweil Awesome that worked thanks Sam!

[sdetweil]

@swvalenti cool… maybe I should dump out the ps -ef list if I find that problem…

[swvalenti]

@sdetweil So I renamed the old magicmirror folder and updated. Now the updates stripped modules and config.js. They are not in the new magicmirror folder at all…what gives?

[sdetweil]

@swvalenti this is not an update, it is a NEW install…

so you have to copy from the old mm folder to the new…

if u wanted to UPDATE then u should run the UPDATE script

https://forum.magicmirror.builders/topic/10859/new-update-upgrade-script-ready-for-testing

[swvalenti]

@sdetweil Well I am an idiot, so I can just delete the new MagicMirror folder and then run the update in the other?

[sdetweil]

@swvalenti yes… UPDATE just gets you the new MagicMirror version. currently 2.9.0

[swvalenti]

Thanks Sam

[bhepler]

Huh. I just tried it on a fresh Buster install on a RPI 3B+ and PM2 failed to install correctly. It seems to be a permissions issue.

[sdetweil]

@bhepler show me the log please

~/install.log

[bhepler]

It’s not terribly illuminating.

install and setup pm2
pm2 not installed, installing
pm2 install result
get the pm2 platform specific startup command
startup command =
pm2 startup command done
configure the pm2 config file for MagicMirror
start MagicMirror via pm2 now
save MagicMirror pm2 config now
disable screensaver via lxsession

[sdetweil]

@bhepler hang on, I’ll be back home in a few minutes.

Can u do

pm2 startup

[bhepler]

@sdetweil I already went through the installation procedure to get pm2 installed. That required the npm command to install pm2.

After the initial script run, pm2 start MagicMirror returned a “bash: pm2: command not found” error. Once I got pm2 installed, getting the script monitored by pm2 was easy enough. At a guess, it’s a problem with using sudo to install pm2, but I’m afraid I don’t have the exact error message.

[sdetweil]

@bhepler what did u have to do for the pm2 install?

[bhepler]

@sdetweil - I pulled this from the official GitHub page: sudo npm install -g pm2. Once I ran that, I just changed to the ~/MagicMirrors/installers folder and told pm2 to run/maintain it: pm2 start mm.sh

[sdetweil]

@bhepler weird… that is that the script does between the two log entries

	echo pm2 not installed, installing >>$logfile	
	result=$(npm install $up -g pm2)
	echo pm2 install result $result >>$logfile

$up is for the mac

bet it needed sudo…

[sdetweil]

@bhepler

I also added to catch the stderr output to the log too

	echo pm2 not installed, installing >>$logfile	
	result=$(sudo npm install $up -g pm2 2>&1)
	echo pm2 install result $result >>$logfile