MMM-MotionEye - surveillance video stream on your mirror!

Snille

Fixed. Just sent you a PR. :)
Check it, I’m fairly new to Node.js so it may not be the best solution. :)

lolobyte

Hi @Snille

before i made a MM2, i started with a motion cam. It’s running now roundabout a half year outside from 30 ° to -20 ° C.

I tried to insert my IP and port, but it don’t’ run.

Any proposal to try a forensic research where to find the shitty error?

Cato

@Snille Had some comments. Fix those and I’ll merge it :)

Cato

@lolobyte First question: What motion software do you use?

Snille

@Cato Great! Thanks for fixing my mistakes. :)

lolobyte

@Cato

Hi, that’s the info of help.
Downloaded from
https://www.dropbox.com/s/xdfcxm5hu71s97d/motion-mmal.tar.gz

pi@raspi3-MM2:~ $ motion -h
motion Version mmaltest, Copyright 2000-2005 Jeroen Vreeken/Folkert van Heusden/Kenneth Lavrsen

usage: motion [options]

Possible options:

-n Run in non-daemon mode.
-s Run in setup mode.
-c config Full path and filename of config file.
-d level Log level (1-9) (EMR, ALR, CRT, ERR, WRN, NTC, ERR, DBG, ALL). default: 6 / NTC.
-k type Type of log (COR, STR, ENC, NET, DBL, EVT, TRK, VID, ALL). default: ALL.
-p process_id_file Full path and filename of process id file (pid file).
-l log file Full path and filename of log file.
-m Disable motion detection at startup.
-h Show this screen.

Motion is configured using a config file only. If none is supplied,
it will read motion.conf from current directory, ~/.motion or /etc.

Cato

@lolobyte You will have to install motionEyeOS or motionEye to use this module. Please read pre-requisites.

lolobyte

@Cato
Thank you for your answer.

I just tried MotionEyeOS before i went to Motion.
In my eyes it wasn’t configurable with my desired functionality.

I just hoped there is a possibility to implement foreign streams.

Cato

@lolobyte As long as the software can provide a “motion jpeg”-stream, it can be supported.

Basically, you can test it your selv by making a local .html-file with <img src="xxxxx" />

emos

For some reason i just get a “broken” picture icon, and if i try to open http://MotionEyeIP/motioneye/1 the site just says:

{"error": "not found"}

I have disable the password for the ‘Surveillance Username’ so no login is required.

I know the cam is available and motioneyos is working as normal. If i open http://192.168.1.200:8080/picture/1/current/ in my browser i can see the last snapshot, but not doing me any good…

Any suggestion?

{
	module: 'MMM-MotionEye',
	position: 'bottom_right',
	config: {
		url: "http://192.168.1.200:8080/motioneye/1",
		debug: false
		}
},