Read the statement by Michael Teeuw here.
mmm assistant mk2
-
@reddyman im surprised too, the github page has gone dark… about the assistant mk2 package, i have the zip file that i downloaded earlier, and i would be happy to share it with you! and no… i have no clue of any back ups… cheers
-
@sdmydbr9 I have same problem with mmm assistant mk2. Can you please send me that zip archive from old version? I can send you a message with my email address.
Thank you. -
-
@Bugsounet Ahh that makes sense. I’m sorry to hear that project is dead but I understand. I’m sorry you had to deal with so many crappy and ugly people; they don’t deserve anything from someone who put in so much hardwork and sweat as you have.
Gah, I just wish I didn’t update my mirror yesterday. The last time I updated it was in February and everything was working perfectly. And of course when I updated, I didn’t bother making a backup. Valuable lesson learned though!
I’ll take down my mirror for now I guess. But best of luck to you Bugsounet to anything you do in the future!
-
@reddyman : don’t remove it ;)
I am ready to deploy the new assistant
AND … I am ready to deploy the new Assistant2DisplayEdit:
- MMM-Assistant2Display is deployed
-
!!!
I had thought you meant you were stepping down completely. I misunderstood, this is wonderful news!
I will be checking for days for your new assistant then… and let me know if you take donations!
-
For clarify why closing it:
- In this forum, there 2 gays who arcel me and there are now stopped
So, I don’t want to continue with AMk2 name (sorry @sean)
too many bad memories are in mind with this module name -
Hi @Bugsounet thanks !
Your work is really appreciated.
I wish I knew js to help.
However if you need polite and Linux expert beamta testers or simply financial contribution please let me know. -
@dvbit: thx :)
Time -> 23:30
Deploy new Assistant in 30 min ! -
Bien heureux de t’aider si tu veux. Je suis italien mais je parle francais. Meme si c’est seulement pour traduire ;-)
-
AND… it’s now time !
Welcome to the new assistant : MMM-GoogleAssistant
Welcome to the new Assistant2Display: MMM-Assistant2Display
-
@Bugsounet great!
Will be testing.
And reporting quietly .Tx again. Merci
Ps: good I have exactly the same setup.
-
Attention … configuration is not the same.
Read Wiki -
@Bugsounet yep. Sure. Reading now. Installing tomorrow.and giving you feedback.
If you need help in giving simple support (i.e. dumb Linux, not reading the wiki … Aka not real issue / first level support I can try to help you there :-)) -
no problem :)
-
Started partial installation tonight…and I can say: what an absolutely beautiful and efficient installer! This is the best installer I have seen for a module.
I’m running it on a fresh installation of Raspberry Pi OS and fresh installation of MagicMirror with no other modules installed.
Ran into a small hiccup during the post-installation process, during audio configuration for the speakers. I can’t get any sound output.
It’s late so I will fiddle and experiment more tomorrow but in case anyone else runs into the same problem before I figure out a solution, I’ll leave some data below:
Sending audio output via aux cable from pi to monitor and can confirm audio is working when playing a youtube video.
Interestingly I hear a beep during this part of the installation, but nothing after that:
Do you want to check compatible GCC version [Y/n] Your choice:No sound from here onwards:
Checking Speaker and Microphone... Do you want check your audio configuration [Y/n] Your choice: Y Checking audio output... Make sure your speakers are on press [Yes]. Press [No] if you don't want to check. [Y/n] Your choice: Y Current configuration not working ! Did you hear Google beep? [Y/n] Your choice: n Selection of the speaker device card 0: b1 [bcm2835 HDMI 1], device 0: bcm2835 HDMI 1 [bcm2835 HDMI 1] card 1: Headphones [bcm2835 Headphones], device 0: bcm2835 Headphones [bcm2835 Headphones] Indicate the card # to use [0-9]: 0 Indicate the device # to use [0-9]: 0 you have selected: hw:0,0 (plughw:0) Checking audio output... Make sure your speakers are on press [Yes]. Press [No] if you don't want to check. [Y/n] Your choice: Y Current configuration not working ! Did you hear Google beep? [Y/n] Your choice: n Selection of the speaker device card 0: b1 [bcm2835 HDMI 1], device 0: bcm2835 HDMI 1 [bcm2835 HDMI 1] card 1: Headphones [bcm2835 Headphones], device 0: bcm2835 Headphones [bcm2835 Headphones] Indicate the card # to use [0-9]: 0 Indicate the device # to use [0-9]: 1 you have selected: hw:0,1 (plughw:0) Checking audio output... Make sure your speakers are on press [Yes]. Press [No] if you don't want to check. [Y/n] Your choice: Y Current configuration not working ! Did you hear Google beep? [Y/n] Your choice: n Selection of the speaker device card 0: b1 [bcm2835 HDMI 1], device 0: bcm2835 HDMI 1 [bcm2835 HDMI 1] card 1: Headphones [bcm2835 Headphones], device 0: bcm2835 Headphones [bcm2835 Headphones] Indicate the card # to use [0-9]: 1 Indicate the device # to use [0-9]: 0 you have selected: hw:1,0 (plughw:1) Checking audio output... Make sure your speakers are on press [Yes]. Press [No] if you don't want to check. [Y/n] Your choice: Y Current configuration not working ! Did you hear Google beep? [Y/n] Your choice: n Selection of the speaker device card 0: b1 [bcm2835 HDMI 1], device 0: bcm2835 HDMI 1 [bcm2835 HDMI 1] card 1: Headphones [bcm2835 Headphones], device 0: bcm2835 Headphones [bcm2835 Headphones] Indicate the card # to use [0-9]: 1 Indicate the device # to use [0-9]: 1 you have selected: hw:1,1 (plughw:1) Checking audio output... Make sure your speakers are on press [Yes]. Press [No] if you don't want to check. [Y/n] Your choice: Y Current configuration not working ! Did you hear Google beep? [Y/n] Your choice: naplay -l **** List of PLAYBACK Hardware Devices **** card 0: b1 [bcm2835 HDMI 1], device 0: bcm2835 HDMI 1 [bcm2835 HDMI 1] Subdevices: 4/4 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 card 1: Headphones [bcm2835 Headphones], device 0: bcm2835 Headphones [bcm2835 Headphones] Subdevices: 4/4 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3
EDIT:
I couldn’t sleep so I continued playing. I set audio speaker output to 1,0 which should be the correct configuration for me even though I couldn’t hear anything and I was getting an error. HOWEVER, in the next portion where I had to setup my microphone, I was able to hear my own voice playback.Ran through the sample config example, and everything works perfectly with the brief testing I have done. Beautiful work Bugsounet!
-
@Bugsounet thank you so much for this awesome module… works like a charm… 🤩
-
@Bugsounet said in mmm assistant mk2:
AND… it’s now time !
Welcome to the new assistant : MMM-GoogleAssistant
Welcome to the new Assistant2Display: MMM-Assistant2Display
Will do some tests and debug on it but …
Impressive.
Good work.
Congrats. and THANKS for sharing. -
Installing . Flawless process
-
and flawless install!
Thanks @Bugsounet
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login