[MMM-PIR-Sensor] Install failing

[johnnyboy]

This post is deleted!

[pjkoeleman]

@STEFF92
What is not working;

• Do you still have the problem with the config.sys, when post your config.sys here.
• Is the PIR not switching off you screen?

[STEFF92]

@johnnyboy But it doesnt matter as long as i use the gpio that belongs to this pin or am i wrong?

[STEFF92]

@pjkoeleman when i want to start the magic mirror it says that i should create a correct config.js file. But the only thing i added in my config.js file (which runs without the following lines) is:

               {
			module: 'MMM-PIR-Sensor',
			config: {
				sensorPIN: 23,
                                powerSaving: true,
                                relayPIN: none,
                                relayOnState: 1,
			}
		},

[johnnyboy]

This post is deleted!

[STEFF92]

@johnnyboy yes i tried it like this :

               {
			module: 'MMM-PIR-Sensor',
			config: {
				sensorPIN: 23,
                                powerSaving: true,
                                relayPIN: none,
                                relayOnState: 1
			}
		},

But it dosent work. Same problem as before.

[johnnyboy]

This post is deleted!

[strawberry 3.141]

@STEFF92 none is not a valid js value either use

{
  module: 'MMM-PIR-Sensor',
  config: {
    sensorPIN: 23,
    powerSaving: true,
    relayPIN: false,
    relayOnState: 1
  }
},

or like this, because relayPIN is set to false by default

{
  module: 'MMM-PIR-Sensor',
  config: {
    sensorPIN: 23,
    powerSaving: true,
    relayOnState: 1
  }
},

[STEFF92]

@strawberry-3.141 Thanks, now the config file and the magic mirror surface are running but there is no response from the sensor. i have moved the potentiometer but the screen doesnt turn off. Do you know any possible mistake i could have made?

[strawberry 3.141]

@STEFF92 I guess you might defined the wrong pin number according on your setup you use gpio23 which is pin 16 in this diagram https://forum.magicmirror.builders/uploads/files/1485851152518-raspberry-pi-15b.jpg, but I never did something with the gpio of the pi