MMM-ProfileSwitcher, A Profile/User/Layout Switching Module

Anhalter42

@Binog For me, the config looks fine. Just to be sure: you actually replaced “ip” in your URL with the actual IP, did you?

Binog

yes, yes,. of course. the two buttons don’t work. the default does work,. and if I say default = you then I get the modules for You,. so that is no problem. but clicking on the bottom does not change a thing, other bottoms do work fine,…

tosti007

Hello @Binog,
First of all kinda unfortunate that it doesn’t work. I have a vague idea of what might be wrong but will have to do a small test by myself. I will test it tomorrow and let you know once I have more info or fixed the problem :)

Blackmirror

Hello,
thanks for the modul,
but when I start this module my magic mirror get blank.

    {
     module: 'MMM-Buttons',
     config: {
    minShortPressTime: 10,
             buttons: [
             {
             pin: 10,
             name: "Radio",
             longPress: {
                      notification: "PROFILE_SWITCH",
                    payload: {action: "Radio_OFF"}},
             shortPress: {
                    notification: "PROFILE_SWITCH",
                    payload: {action: "Radio"}}},
        {
            pin: 11,
            name: "Tagesschau",
            longPress: undefined,
           shortPress: {
              notification: "BUTTON_PRESSED"
             //   payload: {action: "SHUTDOWN"}
            }
        }
    ]
}},
{
    module: 'MMM-ProfileSwitcher',
    config: {
    }
},{
    module: 'MMM-RadioDe',
    classes: 'Radio',
    position: 'bottom_left', // This can be any of the regions.
    config: {
                                    // See 'Configuration options' for more$
                                    station: "hr3",
                                    // can be obtained in embed section of $
                                    api_key: 'XXX',
                                    //optional,
                                    height:"92", // in pixel
                                    width:"360", // in pixel
    }},

cowboysdude

@Blackmirror said in MMM-ProfileSwitcher, A Profile/User/Layout Switching Module:

{
module: ‘MMM-ProfileSwitcher’,
config: {
}
},

That part doesn’t look right to me…

You don’t have anything set in the config options brackets… see the readme here
https://github.com/tosti007/MMM-ProfileSwitcher

At the bottom are the config options ;)

tosti007

@Blackmirror That’s because when the magicmirror starts it goes to the default profile, which in your case contains no modules. So you would have to either set the defaultClass value to "Radio" or change "Radio" to "default"
@cowboysdude ty for answering aswell

tosti007

@Binog Sorry for the late reply, unfortunately I wasn’t able to find any problems with the code you submitted. Could you maybe launch your mm in servermode (node serveronly) and check the your browser’s console for any errors?

Blackmirror

Hello,
‘default everyone’ has work
But I can not start the MMM-Radio modul with profil-switch, but that was my idea.
So, I switch to Profile Radio and the MMM-Radio module will work, all other module are default for everyone.

Here the MMM-Button Module

 module: 'MMM-Buttons',
                    classes: 'default everyone',
 config: {
minShortPressTime: 10,
         buttons: [
         {
         pin: 10,
         name: "Radio",
         longPress: {
                  notification: "PROFILE_SWITCH",
                payload: {action: "default"}},
         shortPress: {
                notification: "PROFILE_SWITCH",
                payload: {action: "Radio"}}},
    {
        pin: 11,
        name: "Tagesschau",
        longPress: undefined,
       shortPress: {
          notification: "BUTTON_PRESSED"
         //   payload: {action: "SHUTDOWN"}
        }
    }
]

}},

tosti007

@Blackmirror try doing it like this:

    longPress: {
      notification: "CURRENT_PROFILE",
      payload: "default"
    },
    shortPress: {
      notification: "CURRENT_PROFILE",
      payload: "Radio"
    }

Blackmirror

No, will not work. :-(