MMM-ProfileSwitcher, A Profile/User/Layout Switching Module

Binog

Hey there, perhaps I am really too stupid,. I can’t get it to run. I have this config:

{
            module: "MMM-ProfileSwitcher",
            config: {
				//includeEveryoneToDefault: true,
				title: true,
				enterMessages: {
					"you me": "Hey %profile%!",
					"me": ["looking great!"], 
					"you": ["looking great!"], 
				},
				leaveMessages: {
					"everyone": "C U %person%!", 
					"me": ["Hey why gone...?", true] 
				},
				timers: {
   				 "you": {},
   				 "me": {},
						},
				enterMessages: false,
				leaveMessage: false,
        			},
        },

and a modulbar that point out this:

"5": {
                       module: "MMM-ProfileSwitcher",
                       text: "you",
                       showUrl: "http://ip:8080/remote?action=NOTIFICATION¬ification=CURRENT_PROFILE&payload=%22you%22",
                       },

but if I hid the bottom, nothing happens!
Think I am missing something. Do I need to set anything else off? My default view is quit perfect and loading, so yes I added the classes for the modules.

classes: 'me',

Thank You in advance !
Jimmy

Anhalter42

@Binog For me, the config looks fine. Just to be sure: you actually replaced “ip” in your URL with the actual IP, did you?

Binog

yes, yes,. of course. the two buttons don’t work. the default does work,. and if I say default = you then I get the modules for You,. so that is no problem. but clicking on the bottom does not change a thing, other bottoms do work fine,…

tosti007

Hello @Binog,
First of all kinda unfortunate that it doesn’t work. I have a vague idea of what might be wrong but will have to do a small test by myself. I will test it tomorrow and let you know once I have more info or fixed the problem :)

Blackmirror

Hello,
thanks for the modul,
but when I start this module my magic mirror get blank.

    {
     module: 'MMM-Buttons',
     config: {
    minShortPressTime: 10,
             buttons: [
             {
             pin: 10,
             name: "Radio",
             longPress: {
                      notification: "PROFILE_SWITCH",
                    payload: {action: "Radio_OFF"}},
             shortPress: {
                    notification: "PROFILE_SWITCH",
                    payload: {action: "Radio"}}},
        {
            pin: 11,
            name: "Tagesschau",
            longPress: undefined,
           shortPress: {
              notification: "BUTTON_PRESSED"
             //   payload: {action: "SHUTDOWN"}
            }
        }
    ]
}},
{
    module: 'MMM-ProfileSwitcher',
    config: {
    }
},{
    module: 'MMM-RadioDe',
    classes: 'Radio',
    position: 'bottom_left', // This can be any of the regions.
    config: {
                                    // See 'Configuration options' for more$
                                    station: "hr3",
                                    // can be obtained in embed section of $
                                    api_key: 'XXX',
                                    //optional,
                                    height:"92", // in pixel
                                    width:"360", // in pixel
    }},

cowboysdude

@Blackmirror said in MMM-ProfileSwitcher, A Profile/User/Layout Switching Module:

{
module: ‘MMM-ProfileSwitcher’,
config: {
}
},

That part doesn’t look right to me…

You don’t have anything set in the config options brackets… see the readme here
https://github.com/tosti007/MMM-ProfileSwitcher

At the bottom are the config options ;)

tosti007

@Blackmirror That’s because when the magicmirror starts it goes to the default profile, which in your case contains no modules. So you would have to either set the defaultClass value to "Radio" or change "Radio" to "default"
@cowboysdude ty for answering aswell

tosti007

@Binog Sorry for the late reply, unfortunately I wasn’t able to find any problems with the code you submitted. Could you maybe launch your mm in servermode (node serveronly) and check the your browser’s console for any errors?

Blackmirror

Hello,
‘default everyone’ has work
But I can not start the MMM-Radio modul with profil-switch, but that was my idea.
So, I switch to Profile Radio and the MMM-Radio module will work, all other module are default for everyone.

Here the MMM-Button Module

 module: 'MMM-Buttons',
                    classes: 'default everyone',
 config: {
minShortPressTime: 10,
         buttons: [
         {
         pin: 10,
         name: "Radio",
         longPress: {
                  notification: "PROFILE_SWITCH",
                payload: {action: "default"}},
         shortPress: {
                notification: "PROFILE_SWITCH",
                payload: {action: "Radio"}}},
    {
        pin: 11,
        name: "Tagesschau",
        longPress: undefined,
       shortPress: {
          notification: "BUTTON_PRESSED"
         //   payload: {action: "SHUTDOWN"}
        }
    }
]

}},

tosti007

@Blackmirror try doing it like this:

    longPress: {
      notification: "CURRENT_PROFILE",
      payload: "default"
    },
    shortPress: {
      notification: "CURRENT_PROFILE",
      payload: "Radio"
    }

Blackmirror

No, will not work. :-(

Blackmirror

Will work, I have the Current_profile not read. Thanks

Binog

@tosti007
The only error is located with to TouchNacigations:

The log says
Cannot GET /modules/MMM-TouchNavigations//MMM-TouchNavigations.js

Where does the double // comes from? (Between …Navigations and MMM-Touch…)
I don’t find it in the config of TouchNavigations…
Any ideas?

Binog

missed something:

undefined is not an object (evaluating ‘modules[i].name’)

I cannot really interpret the output of the console: here it is:

Binog

OK, this should be relevant:
If I press on one of my bottom “you” this is what comes up in the console:

[Error] TypeError: undefined is not an object (evaluating 'modules[i].name')
	(anonyme Funktion) (MMM-Modulebar.js:83)

this is at this line:
if (modules[i].name === data.module) {

and this is what the bottoms look like:

```buttons: {
		"1": {
		     module: "MMM-MotionEye",
		     text: "door",
		     showUrl: "http://ip:8081/motioneye/1",
		     hideUrl: "http://ip:8081/motioneye/1/hide",
		    },
                "2": {                            
		    module: "MMM-Remote-Control",
                    symbol: "refresh",
                    showUrl: "http://ip:8080/remote?action=REFRESH",
                    },
                "3": {
                    module: "MMM-Remote-Control",
                    symbol: "globe",
                    showUrl: "http://ip:8080/remote?action=UPDATE",
                    },
                "4": {
                    module: "MMM-ProfileSwitcher",
                    //Ignium: 1,
                    //text: "me",
                    //showUrl: "this.sendNotification('CURRENT_PROFILE', 'me');",
                    img: "url.jpg",
                    showUrl: "http://localhost:8080/remote?action=NOTIFICATION¬ification=CURRENT_PROFILE&payload=%22me%22",
                     width: 30,
		     height: 40,
		     //profilename: "me",
                    },
                "5": {
                    module: "MMM-ProfileSwitcher",
                    //text: "You",
                    img: "url.jpg", 
		    showUrl: "http://ip:8080/remote?action=NOTIFICATION¬ification=CURRENT_PROFILE&payload=%22default%22",
                    width: 30,
		    height: 40,
		    //profilename: "You",
		      },

of course, ip has a relevant IP-adress. Interestingly button 1-3 work, except for 4 and 5. Any one could help?

tosti007

@Binog To be honest I have no clue why there would be an additional /, try pulling all the new updates from the magicmirror framework (perhaps it was a bug?). The config looks fine for me except the url looks a bit strange NOTIFICATION¬ification that part especially. Does it work when you go to the link manually?

Binog

so the Notification,.,. is a compiling-error of this board. as mentioned above or elsewhere it does look correct in the config file.
Actually I am a bit further, and ruled out some errors,.none the less I am not able to switch profiles!
If I press one of my - not working - bottoms, I get these errors:

konsole:

source-code:

Binog

@Blackmirror
Where to You let Current_profile been read?

Blackmirror

@Binog
I understand your question not really.

I send the current_profile with MMM-Buttons and use it with MMM-RadioDE,
with
classes: ‘Radio’
under the module name

paul.calladine

My mirror is just about finished, I have the MMM-PIRSensor working and MMM-Buttons working which both allow me to wake/sleep the monitor working fine.

However i’d like to use MMM-Buttons as a toggle switch to enable me to essentially enable or disable the PIR sensor module:

i.e.
Profile 1 - PIRSensor wakes and turns off the monitor as normal
Profile 2 - PIRSensor doesn’t do anything on motion being detected and the screen stays off

I was thinking of modifying the code to do this but does anyone know if this module will allow me to achieve the results? Essentially having two profiles the same but profile 1 includes the PIRSensor module?