stronger Raspberry Pi 3 Alternatives

cowboysdude

@SvenSommer

It’s the ASUS H110T/CSM LGA 1151 Intel H110 HDMI SATA 6Gb/s USB 3.0 Thin Mini-ITX Motherboards - Intel

Link is here but it’s no longer available:
https://www.newegg.com/Product/Product.aspx?Item=N82E16813132833

I’m pretty sure there are others with similar specs out there… I’m using a notebook power supply for this.

Ram: https://www.amazon.com/gp/product/B015HQ9TGW/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

WiFi card: https://www.amazon.com/gp/product/B00GUNZUG0/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

CPU: https://www.newegg.com/Product/Product.aspx?Item=N82E16819117625

CPU Cooler: https://www.newegg.com/Product/Product.aspx?Item=N82E16835220067

And a SanDisk 120GB SSD

Damian

@cowboysdude

Hello can you show the set up of the mini itx in situ at all? And what case you used if any. Thank you

SvenSommer

@cowboysdude
I just updated the summary post, could you please check, if there is everything correct?!

cowboysdude

@Damian said in stronger Raspberry Pi 3 Alternatives:

@cowboysdude

Hello can you show the set up of the mini itx in situ at all? And what case you used if any. Thank you

I will take a pic this weekend but as of right now it’s ‘on the bench’ and I don’t have a case as of yet. More than likely will be designed to attached to the wall of the cabinet and not in a case…

cowboysdude

@SvenSommer said in stronger Raspberry Pi 3 Alternatives:

@cowboysdude
I just updated the summary post, could you please check, if there is everything correct?!

   Operating System Support:

    Windows 10*
    Windows 8.1*
    Windows 7
    64-bit supported only

Under that I would also put Linux… I’m running Unbuntu on the machine currently which makes it much easier to run MM :)

cowboysdude

I would, and will at some point, use one of these in place of the SSD… to further compact things…

https://www.newegg.com/Product/Product.aspx?Item=N82E16820228162&ignorebbr=1

Damian

@cowboysdude said in stronger Raspberry Pi 3 Alternatives:

More than likely will be designed to attached to the wall of the cabinet and not in a case…

Thank you. Yes i looked at cases but none were slim/small enough. Look forward to your snaps to see how yours look set up. What power source did you use?

cowboysdude

@Damian I am using a laptop power supply :)

Damian

@cowboysdude said in stronger Raspberry Pi 3 Alternatives:

@Damian I am using a laptop power supply :)

thank you. i could not see a link to it in the first post so just wondered what one you chose. looking forward to your pictures of the setup of your itx when you get time

Snille

I just found this one: https://www.kickstarter.com/projects/librecomputer/libre-computer-board-next-gen-4k-sbc-dev-board-for/description
It may be an alternative. :)