Read the statement by Michael Teeuw here.
Hello-Lucy
-
So everything is ok now?
-
@Mykle1 gonna do a fresh install and copy my config onto the 4b because something messed up happened to all that hardware
It booted but right to a completely blank black dashboard
-
ok, good luck
-
@Mykle1 turns out I just messed up the screen location like an idiot which fixed the blank dashboard and the mic error went away as well as the BMW_CC not loading. but I still get no hdmi output on this 3b+ I wonder what the heck that could be could I have burned that out if everything else on the pi is running fine?
-
@Mykle1 I FIXED IT!!! Sorry lol But it goes to 720x480
if i change it to 1920x1080 like i had it no video output on the hdmi any more -
@Mykle1 got 1080P back by setting
hdmi_group=1
hdmi_mode=16
hdmi_boost > 6
hdmi_ignore_edid = 0xa5000080
hdmi_edid_file = 1in /boot/config.txt
but now i get green flecks everywhere
-
Stop breaking shit. :-)
-
:face_with_tears_of_joy: but thats what i do for a living, I build it or someone else does, then i break it and i fix it, lol
on another note, i guess i said too many unkown commands or somethings and a list of all the commands possible popped up and wont go away, any thoughts other than rebooting :grinning_face_with_smiling_eyes:
-
-
@Mykle1 Sorry to be bothering you again, decided to switch to my pi4b to see how it performs, and now the usb camera I had working on the pi3b+ will not work now, arecord -l lists it as card 2 device 0 and it still says error. Im at a lost npm start dev shows no errors and if I take the same config over to the 3b+ with the proper mapping it works fine
pi@MagicMirror:~ $ arecord test.wav ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM input arecord: main:828: audio open error: No such file or directory
