[MMM-MyRadio] Web Radio Player

[Rolandb]

The module is really great. And especially the help of Robert in my problem. The module and the developer are really recommended. That’s a 1 with a star.

[pinsdorf]

Nice module, indeed. Just an idea: Raspberry Pi 3 has Bluetooth. Would be cool to connect BT speakers and play the radio.

We could also use it for remote audio notification". Say, the mirror is linked to a BT speaker in the next room and it plays a sound when certain notification is received, e.g. new mail …

Anybody tried this?

[tbbear]

@pinsdorf Thanks, Bluetooth is no problem cause MyRadio can play on any audio output, u only need the correct config. and also if u want to start radio with a signal from another modules just do it
with
this.sendNotification(‘NEXT_RADIO’);
like i do with the Alarmclock module.

[Mike7400]

Any idea how to edit config to play on bluetooth device?

[Mykle1]

@mike7400

You might try alsamixer to choose your output device.

[Mike7400]

Output device is OK. When I run sh everything works, I can hear a music. But when I run MM I cannot hear nothing

[raspialex2018]

The same problem like Mike…No output over MM. If i start the script over bash sound and output ok. Can you help me please?

[deder2]

Hello, I have a problem with your module.
the module is not displayed? the script files are well executable.
mpg123 is well installed.
MagicMirror is up to date.
I use your config by default

{
module: ‘MMM-MyRadio’,
position: ‘top_right’,
config: {
stations: [
“Bayern1 Bayern1”,
“Bayern3 Bayern3”,
“Charivari Charivari”,
Kos Kos,
“AB AB”
]

}

}

an idea ?

[tbbear]

Hello,
did u set a , after the last brackets? Did u follow the install from readme?

[yawns]

Kos Kos is missing " ", isn’t it?

[tbbear]

@yawns good catch i think

[deder2]

I progress, the module is displayed but no image of chain and no sound.

  {
    module :  "MMM-MyRadio" ,
            position :  "top_left",
            config : {
                    stations : [
                             " Bayern1 Bayern1 " ,
                             " Bayern3 Bayern3 " ,
                             " Charivari Charivari " ,
                             " Kos Kos " ,
                             " AB AB "
                            ]
            }
  },

[tbbear]

@deder2 please remove the blanks before and after a station it should look like
“Bayern1 Bayern1“

[deder2]

great, no space it works for pictures.
however, I created two radios (two script files and two image files)
but I still have the names of the old radio Bayern1 AB …
And still no sound.

  {
    module :  "MMM-MyRadio" ,
            position :  "top_left",
            config : {
                    stations : [
                             "rtl rtl" ,
                             "latina latina" ,
                            ]
            }
  },

script :

#!/bin/bash

killall mpg123

sleep 0.1

mpg123 -@ http://streaming.radio.rtl.fr/rtl-1-44-128.m3u 1>~/MagicMirror/modules/MMM-MyRadio/RDS.log

thank you

[tbbear]

@deder2 Are u sure that ur audio configuration is working? U can play sound? I had the most problems
with setting up the audio config on the diff. systems so please check if this works.
After changing to ur stations (by the the way i checked ur mpg123 -@ http://streaming.radio.rtl.fr/rtl-1-44-128.m3u
and its working fine on my system. Try on ur own call from terminal: mpg123 -@ http://streaming.radio.rtl.fr/rtl-1-44-128.m3u
if u hear nothing than its a problem of ur audio config.

[deder2]

thank you for your help and sorry for my english.

in the console the sound works with this command

mpg123 -@ http://streaming.radio.rtl.fr/rtl-1-44-128.m3u

I planned to use MMM-voice to control your module.

The sound of the radio must launch directly at the start of the magicmirror?

[deder2]

[deder2]

[Cr4z33]

Hi @tbbear, is there any chance you can get m3u8 streams working with your module by ie. using cvlc instead? :)

mpg123 can’t handle this format right now.

[Cr4z33]

@tbbear you there mate?