MMM-voice

Mykle1

I’m here for a while if you should come around

Mykle1

I tested my microphone on the Pi by doing this:

pi@Pi3:~ $ arecord -D plughw:1,0 test.wav
Recording WAVE 'test.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono
^CAborted by signal Interrupt...
pi@Pi3:~ $

That gave me this:

Which sounds ok. Clear, and not too much white noise.

As long as my Audio Device Settings looks like this:

I am not in debug mode

{
     			module: 'MMM-voice',
     			position: 'top_right',
     			config: {
         		microphone: 1,
			keyword: 'MAGIC MIRROR', // UPPERCASE ONLY
			timeout: 15
     		}
 		},

However, I am getting this:

At least we got it working

strawberry 3.141

@Mykle1 the second line is in debug mode only

Mykle1

@strawberry-3.141 said in MMM-voice:

the second line is in debug mode only

So, can I remove that from showing?

strawberry 3.141

@Mykle1 it shouldn’t be there when you not added debug flag in the config

Mykle1

@strawberry-3.141

I’ll try debug: false and see what happens

Mykle1

@strawberry-3.141

You’re right again. I had config.js opened twice. One with debug and one without. I removed debug and saved and closed both. Now it’s fine. One last thing, if you don’t mind, I’d like to align everything in MMM-voice to the right margin. Please and thank you. :thumbsup_tone1:

Mykle1

@strawberry-3.141 Oh, and I can change the 'MAGIC MIRROR" activation phrase to something else?

strawberry 3.141

@Mykle1 yes you can change it, that’s why it is configurable. try to apply the rule text-align: right; in custom.css

Mykle1

@strawberry-3.141 said in MMM-voice:

yes you can change it, that’s why it is configurable. try to apply the rule text-align: right; in custom.css

I will endeavor to try, thanks for your help

Mykle1

@strawberry-3.141 said in MMM-voice:

try to apply the rule text-align: right; in custom.css

I tried:

.MMM-voice {
  text-align: right;
}

and

.region.top.right .MMM-voice {
  text-align: right;
}

Nothing happened
At least the module seems stable and it’s working. :thumbsup_tone1:

Mykle1

@strawberry-3.141 said in MMM-voice:

try to apply the rule text-align: right; in custom.css

I don’t mind trying to get it to work but can you give me another hint? Am I close? haha!

strawberry 3.141

@Mykle1 you have to either override the class align-left which is getting confuse or set an important flag

.MMM-voice .align-left {
  text-align: right;
}

.MMM-voice {
  text-align: right !important;
}

Mykle1

@strawberry-3.141 said in MMM-voice:

you have to either override the class align-left which is getting confuse or set an important flag

Ohhh, I was so close! Thank you again :thumbsup_tone1:

c.keen

Hi guys,
I would like to control my mirror by using MMM-voice. The installation was quite easy. But now, the icon on the mirror gives an “ERROR” after the microphone has been initialised. I have read the whole thread and tried a few options but none of them worked. Reading the error.log it gives only “127”. Reading the debug.log it says: “pocketsphinx_continuous:: error while loading shared libraries: libpocketsphinx.so.3: cannot open shared object file: No such directory”.

At first I thought that not all dependencies have been installed correctly althought the installer did not give any warnings or errors. So I thought the I have to install pocketsphinx_continuous and lmtool myself but found them in the node_modules folder.
Can you please help me?

strawberry 3.141

@c.keen do you have an entry in your bashrc file at the bottom?

c.keen

please excuse, how do I find the bashrc file? I know some commands but am not really damiliar with raspbian / linux …

c.keen

found the bashrc file !
the last few lines it does not comment on magic mirror or a module itself … (?)

# enable programmable completion features (you don't need to enable
# this, if it's already enabled in /etc/bash.bashrc and /etc/profile
# sources /etc/bash.bashrc).
if ! shopt -oq posix; then
  if [ -f /usr/share/bash-completion/bash_completion ]; then
    . /usr/share/bash-completion/bash_completion
  elif [ -f /etc/bash_completion ]; then
    . /etc/bash_completion
  fi
fi
export LD_LIBRARY_PATH=:/usr/local/lib
export PKG_CONFIG_PATH=:/usr/local/lib/pkgconfig
export LD_LIBRARY_PATH=:/usr/local/lib:/usr/local/lib
export PKG_CONFIG_PATH=:/usr/local/lib/pkgconfig:/usr/local/lib/pkgconfig

c.keen

the bold part was not in the file itself (the forum software did it). The file ends with … pkgconfig as can be seen above

strawberry 3.141

@c.keen ok looks like you ran the installer multiple times, but your links are set so it should find the libpocketsphinx. Did you try to restart the raspberry or the terminal?