MMM-EyeCandy shown when USER_PRESENCE

Mykle1

@thedk said in MMM-EyeCandy shown when USER_PRESENCE:

this.show means how long the eyecandy is shown?

this.show(2000); means the transition from hidden to shown is 2000ms, or 2 seconds…

Now, in order to hide all modules “when the PIR doesn’t detect any movement”, you could try something like this within the PIR module

notificationReceived: function(notification, payload) {
        if (payload === false) {
              MM.getModules().enumerate((module) => {
                           module.hide(2000);
                      });
        } else if (notification === 'USER_PRESENCE') {
              MM.getModules().enumerate((module) => {
                           module.show(2000);
                      });
        },

Something like that.

thedk

Thanks for that.
To hide all modules i an other problem. I have a discussion about that, when the screen goes off to save energy.
I wanr to use this code just for eyecandy an maybe newsfeed cause of the high Temperatur of the Pi when its always running.

thedk

Is it possible to add a duration how long the eyecandy is shown?
Rest works fine.

Mykle1

@thedk said in MMM-EyeCandy shown when USER_PRESENCE:

Is it possible to add a duration how long the eyecandy is shown?

I’ll take a look at it when I get a chance. In the meantime, you could use something like this https://github.com/ianperrin/MMM-ModuleScheduler to accomplish that. Or, there are a few voice modules that can hide or show modules upon command.

thedk

With the Sheduler it wouldnt work, i guess.
I just want to show the eyecandy when PIR detects movement for some seconds. Maybe it isnt that complicated and just a little command?

ejay-ibm

Hi all,
I’m looking for something similar than the main thread request.
I need to switch between 2 gif images on notification sent by other module.
Eg : On notification 1 , diplay gif one , on notification 2 display Gif 2 .
I can’t find how to achieve this…
@Mykle1 Do you still make developement on this module ? If yes would it be possible to implement some notification consideration in your module to handle multiple custom images ?
Thank you !

Ejay

Mykle1

@ejay-ibm

That is really not the purpose of this module. It was designed to simply show animations. Perhaps one of the image modules would be better suited to your needs. I will look into this when I am not so busy.