I think it’s time to show you some pic ;)

I’m using MM as a “HUD” for my home automation project. All the notification from home automation are send to the MM!

I’m using a 42" tv in portrait mode using a RPI3

Both front panel are kind of door so I can open it and go behind the monitor and also behind the lower part where I’m having all the hardware I’m using for the home automation!

Still have some thing to do, like putting some color on the wood to fit the house, probably a little brown like the molding on the ceiling!

@paviro You think it would be possible to display somewhere in MM2 the output from the camera at the same time as your module with a “debug” option?

It would be easier to place the camera at the right location while working on MM!

@feedparakeet I disable the authentication in Grafana so I can use direct link to a graph without a username/password!

In grafana, you can “export” a graph and it will give you a direct URL that you can use directly in an iFrame!

For datasource, currently I’m using a module in my home automation that already send data to grafana!

I need to work later on some unix script to send data directly in grafana!

Need some cleanup for the cables and everything but for the moment all the hardware is inside ;)

Thanks Strawberry!

I just installed it, works fine.

Except, I can’t really place it at the real bottom right… 'cause I’m using bottom_bar , bottom_right is just on top of bottom_bar

@MichMich Will try that! Maybe that will solve the problem!

Mike…

Can help you in french too!

I’m saying that i’m using the swap code from the URL you gave me! But this works like a charm for different module at the same location! What I’m trying to do it’s to rotate the same module with different configuration at the same place!

I’m using the iFrame module to display some graphic from Grafana and I would need to “rotate” a couple of them on MM at the same location! So instead of having 3-4 iFrame at the same time, I will alternate all of them at the same location to save on space!

@shbatm Do you think it could be possible to run this on another plateform, like pine64 with armbian where omxplayer is not available?

The npm install part is not working as omxplayer is not available…

@strawberry-3-141 not sure if it’s related to the latest MM update but since a little while, notification from the syslog, only show the “type” and nothing for the message itself…

@strawberry-3.141 I finally installed the second screen this weekend!

The thing also, not sure I want to have the same config on both screen (not the same size) The first screen is a 42" 1920x1080 and the second one, 32" at 1280x720…

It will be more useful to be able to have a “centralize” data and that each screen fetch only the data it need…

I currently have a raspberry pi that only have Grafana on it to log all kind of data for graph that I display under MM using iFrame. Maybe we can send all the data there with a MM running in server mode only having ONLY syslog as a module and use it to send data on other with some filtering ?

Maybe we can filter on the “info/warning/critical”…

Hey guys…

Would like to do some custom CSS for the clock module, but just for the time.

Currently HH and MM are the same size and SS is smaller! I would like to have the MM bigger than the HH!

@strawberry-3.141 Each mirror will run independent!

@strawberry-3-141 hey mate… do you think it can be possible to have a way to replicate/centralize the syslog data…

Currently I have one installation of MM in the house, but currently building a couple more. And would need to be able to share the syslog data…

Maybe a config in syslog module to “send” data to “slave” ?

I think I found the problem… the MMM-Sounds module is crashing under the latest version of MM2

@MichMich ,

Since I update this morning with git pull and npm install using v2.1.1

MM refuse to start and crash!

Starting MagicMirror: v2.1.1
Loading config ...
Loading module helpers ...
No helper found for module: MMM-ProfileSwitcher.
Initializing new module helper ...
Module helper loaded: MMM-LoginAction
Initializing new module helper ...
Module helper loaded: MMM-Buttons
Initializing new module helper ...
Module helper loaded: MMM-Mobile
Initializing new module helper ...
WARNING! Could not load config file. Starting with default configuration. Error found: TypeError: m.loaded is not a function
Loading module helpers ...
No helper found for module: MMM-ProfileSwitcher.
Initializing new module helper ...
Module helper loaded: MMM-LoginAction
Initializing new module helper ...
Module helper loaded: MMM-Buttons
Initializing new module helper ...
Module helper loaded: MMM-Mobile
Initializing new module helper ...
App threw an error during load
TypeError: m.loaded is not a function
    at loadModule (/home/pi/MagicMirror/js/app.js:144:6)
    at loadNextModule (/home/pi/MagicMirror/js/app.js:161:5)
    at /home/pi/MagicMirror/js/app.js:163:6
    at Class.loaded (/home/pi/MagicMirror/modules/node_modules/node_helper/index.js:19:3)
    at loadModule (/home/pi/MagicMirror/js/app.js:144:6)
    at loadNextModule (/home/pi/MagicMirror/js/app.js:161:5)
    at /home/pi/MagicMirror/js/app.js:163:6
    at Class.loaded (/home/pi/MagicMirror/modules/node_modules/node_helper/index.js:19:3)
    at loadModule (/home/pi/MagicMirror/js/app.js:144:6)
    at loadNextModule (/home/pi/MagicMirror/js/app.js:161:5)
Whoops! There was an uncaught exception...
TypeError: m.loaded is not a function
    at loadModule (/home/pi/MagicMirror/js/app.js:144:6)
    at loadNextModule (/home/pi/MagicMirror/js/app.js:161:5)
    at /home/pi/MagicMirror/js/app.js:163:6
    at Class.loaded (/home/pi/MagicMirror/modules/node_modules/node_helper/index.js:19:3)
    at loadModule (/home/pi/MagicMirror/js/app.js:144:6)
    at loadNextModule (/home/pi/MagicMirror/js/app.js:161:5)
    at /home/pi/MagicMirror/js/app.js:163:6
    at Class.loaded (/home/pi/MagicMirror/modules/node_modules/node_helper/index.js:19:3)
    at loadModule (/home/pi/MagicMirror/js/app.js:144:6)
    at loadNextModule (/home/pi/MagicMirror/js/app.js:161:5)
MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues

Hey guys…

Is it me or having this module + ProfileSwitcher + Facial are not working well together.

I have no issue using the buttons + ProfileSwitcher as I can toggle between profile! Facial recognize me but switch to nothing…

@feedparakeet I disable the authentication in Grafana so I can use direct link to a graph without a username/password!

In grafana, you can “export” a graph and it will give you a direct URL that you can use directly in an iFrame!

For datasource, currently I’m using a module in my home automation that already send data to grafana!

I need to work later on some unix script to send data directly in grafana!